Q: How do I unlock the seat belt?

asked by on January 19, 2016

How do I unlock the seat belt?

Occasionally the seat belt will lock, making it hard for you to move, or buckle the belt. When this happens, allow the belt to retract fully, wait a few seconds, and then pull the belt out very slowly and smoothly.

The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing


Experienced Mechanic?

Earn up to $70/hr

What others are asking

Having to add a ton of oil, what’s going on?
The volume of oil you are using may actually be an acceptable amount in the eyes of the manufacturer. To find out the exact amount of oil your car is using, you would have to go through a oil consumption...
Car door not closing and locking properly
It sounds like there is a problem with your door latch. The door locks are tied into the door latch so that explains why your door does not want to shut properly and your power locks are jamming up. I...
Spark plug hole stripped
Sometimes the hole can be saved, and sometimes it cannot. Methods for repairing the hole include chasing it with a tap, or using a HeliCoil kit. A HeliCoil is a coil-wire insert used to create new threads in the cylinder...
Fuel Rail System Error Code
Considering that the code is related to a problem in the fuel system, you should leave it to the professionals to avoid personal injury. When fueling the car, check twice to make sure the fuel cap is fastened properly. Low...
Thumping noise and vibration at lower speeds
Hello there, with the 2002 CL500 and many other older vehicles it is not uncommon to develop vibration issues. The most common causes would be a damaged rim, out-of-balance tire, failed strut (https://www.yourmechanic.com/services/strut-assembly-replacement) or shock (https://www.yourmechanic.com/services/shock-absorber-replacement), or another failed suspension...
Oil change
I am not sure how this could have effected your transmission but the other issues you had are very likely related to adding too much oil. Depending on how much extra oil was added, the oil level may have reached...
No crank no start.
Hi there. Check the battery cables and make sure that they are tight and clean. Check the cables that attach to the starter and make sure that they are all tight and clean. The starter remote wire could have an...
Shaking and wants to stall
Hi There, Shaking or vibration (https://www.yourmechanic.com/services/engine-is-shaking-pulsating-or-vibrating-inspection) may be caused by many different things such as faulty spark plugs, poor fuel pressure or misfires. Other things such as a faulty idle air control valve (https://www.yourmechanic.com/services/idle-control-valve-replacement) may cause the engine idle to...
Mercury Mariner battery light
One hundred forty miles is too far if your alternator has failed, even if you depart with a fully charged battery. In your circumstance, what you want to determine is charging output at the battery posts. Charging output should be...

Related articles

A Buyer's Guide to the 2012 Chevrolet Caprice PPV
With With the phasing out of the long-lived and beloved police cruiser in the form of the Ford Crown Victoria, 2012 brought a new car into town via the Caprice PPV (Police Patrol Vehicle). This new incarnation of an old...
How to Choose a Safe Car
When in the market to buy a new or used car (https://www.yourmechanic.com/article/how-to-buy-a-car), the vast array of brands and models from which to choose can make the process confusing. Of course, there may be a style or some particular features that...
The Top 10 Most Problematic Cars
All cars have issues, from grinding brakes to gasket leaks. The Ford Explorer's and Honda Civic's bad transmissions rank them as the most problematic.