Skip the auto shop - Our mechanics make house calls

Q: How do I turn on the headlights?

asked by on

How do I turn on the headlights?

To turn on the headlights, first locate the turn signal lever, which protrudes from the left side of the steering column. Then, turn the Light switch to the headlights position. Tips When the headlights are turned on, the front park, side marker, tail, license plate, and instrument lights will also turn on.

Was this answer helpful?

Need advice from certified mechanic? Get help now!

Over 1000 mechanics are ready to answer your question.
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details
  1. Home
  2. Questions
  3. How do I turn on the headlights?

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: Car does not accelerate above 2000 RPM

You either have a clogged fuel filter or low fuel pressure. Change the fuel filter and then check the pressure. If the problem continues then you may need to have a diagnosis done on the mass air flow sensor or...

Q: How do I replace the lights?

Your car has a number of different lights that range from convenient accessories to those required to legally drive at night. However, some of your lights cannot be changed except by a technician. These include: Your headlights (both xenon...

Q: High beam headlight not working properly.

Hi there. The multifunction switch is not working and needs replaced. Check the fuses are good, but if the high beams works on the temporally side of the switch, then the fuse to the headlights is working. The switch has...

Related articles

What are the Car Pool Rules in Hawaii?
Hawaii is widely regarded as a land of vacation and relaxation, and as such, its scenic roads and routes are far better known than the state’s freeways. But, as with all...
P2428 OBD-II Trouble Code: Exhaust Gas Temperature Too High Bank 1
P2428 code definition A P2428 trouble code signifies that the PCM has detected a problem in the exhaust gas temperature sensor circuit in bank 1, which subsequently contains the number one...
P2103 OBD-II Trouble Code: Throttle Actuator Control Motor Circuit High
P2103 means there is a fault with the throttle actuator control motor circuit, likely due to a defective electrical component or part.