Skip the auto shop - Our mechanics make house calls

Q: How do I turn on Sport mode?

asked by on

How do I turn on Sport mode?

A: Sport mode controls the speed of the engine...

Sport mode controls the speed of the engine and the shifts of the transmission such that your car has a sportier feel, and more closely resembles a track car. To turn on Sport mode, Press the Sport Mode switch. An indicator light will illuminate to confirm that you are in Sport mode. Press the switch a second time to turn off Sport mode.

Was this answer helpful?

Need advice from certified mechanic? Get help now!

Over 1000 mechanics are ready to answer your question.
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: 7 codes transmission shifting bad could it b ecm

Having that many codes that go to one component may want you to quickly condemn the ECM. However, the vehicle should not have the ECM replaced until one or more of the codes retrieved calls for the replacement of the...

Q: Monitors won't reset

The monitors only reset after each test has passed. The monitors will need to take in some driving, at different speeds and conditions, for the change to pass. If they do not pass after driving for a few days, then...

Q: How do I use Trip A/B mode on the Uplevel Message Center?

In the helpful Uplevel Message Center, there is a Trip A/B mode. This mode allows you to track the time, distance, average MPG, amount of fuel used, and odometer of a particular trip. To use the Trip A/B mode. ...

Related articles

P0052 OBD-II Trouble Code: HO2S Heater Control Circuit High (Bank 2 Sensor 1)
P0052 code definition HO2S Heater Control Circuit High (Bank 2 Sensor 1) What the P0052 code means This code is seen when the Engine Control Module (ECM) tries to control the...
P2428 OBD-II Trouble Code: Exhaust Gas Temperature Too High Bank 1
P2428 code definition A P2428 trouble code signifies that the PCM has detected a problem in the exhaust gas temperature sensor circuit in bank 1, which subsequently contains the number one...
P2103 OBD-II Trouble Code: Throttle Actuator Control Motor Circuit High
P2103 means there is a fault with the throttle actuator control motor circuit, likely due to a defective electrical component or part.