Q: How do I adjust the rearview mirror?

asked by on January 07, 2016

How do I adjust the rearview mirror?

The rearview mirror is an important safety feature that gives the driver visibility out of the rear window. Before operating your vehicle, you should always adjust your rearview mirror so that you have maximum visibility. To adjust the rearview mirror, simply move it with your hand until it is in the ideal position.

The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing


Experienced Mechanic?

Earn up to $70/hr

What others are asking

2005 Chevy van 2500 6.0 gas liter. Replace [water pump](/topics-water-pump/) and thermostat still getting hot.

No oil pressue 2008 tahoe new oil pump

If the engine is not noisey then you may have a bad oil sender and clogged screen under sender and need to remove it and replace or clean it and replace sender. If you check pressure manually at the sender...

Fire in fuse box

Anytime there is a fire in a fuse box it is most of the time caused by loose or corroded connections at the source of the fire. You may have a bad solder joint inside the fuse box that caused...

Where is the fuel vapor leak detection pump located

The leak detection pump, also known as the EVAP system integrity module (ESIM), is Mopar Part No. 4861962AB for your car. The ESIM is an emissions control device and is typically mounted on the vapor canister in the rear of...

Backfiring and sluggish

It sounds like you may have a misfire or a timing problem causing the motor to backfire. Engine misfires can be caused by many different problems and are generally caused by either a spark or fuel issue or in some...

How can i disable the anti theft system, the light keeps blinking?

Hi there. Aftermarket alarm systems can create problems, typically from poor installations. The vehicle's wiring harness is usually tapped into and removal of the alarm system is more than just pulling a fuse. Most aftermarket alarm systems are installed under...

Ford Ranger won't go into gear brand new slave cylinder installed

You may have air in the clutch hydraulic system and need to bleed out the air. When you jacked up the rear of your truck an air bubble must have gone down to the clutch slave cylinder and caused the...

Related articles

A Buyer’s Guide to the 2012 Mercedes-Benz G-Class
Combining Combining rugged performance with an iconic boxy exterior style, the 2012 Mercedes-Benz G-Class is a hallmark of the SUV segment. It manages to combine true off-road capabilities with luxurious comfort and outstanding on-road performance in a way that most...
Is it Safe to Drive With a Wheel Bearing Gone?
Wheel bearings help a car roll smoothly. Bad or missing wheel bearing symptoms include grinding noises, a loose steering wheel, and uneven tire wear.
How to Drive Safely without Mirrors If You Have To
Your Your car has mirrors for a very good reason: you need to see behind you and beside you at all times, or your safety is compromised. You’ll also be a threat to other people on the road. But what...