Q: CV Joint Change instead of the wheel hub assembly.

asked by on January 03, 2017

What i actually need changed is the cv joint axle instead of the Wheel Hub Assembly Replacement i had selected from the set up page.

My car has 97000 miles.
My car has an automatic transmission.

Customer wants to change the information from having a wheel hub assembly replacement changed to a CV Joint / CV Shaft replaced on the set up page.

The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

What others are asking

New CV axle caused what looks like positive camber

Hello. Your Daytona needs to be aligned. The bottom attachment of the front struts is often the adjustment point for camber on many front-wheel drive vehicles these days. When the strut is replaced, the alignment is "lost", and the suspension...

Moving a rusted car

Hello. If it will not move because of the rust built up on the rotors and pads, then the wheels and calipers should be removed and the rust cleaned from the rotors and pads. This will help to free it...

Want to know what this check engine code 190302 mean

This code relates to a fuel tank ventilation/purge system leak. Three years ago, BMW issued a Technical Service Bulletin - TSB that documents a common cause of the code, namely a defective pressure switch. While other faults can cause the...

Scraping while decelerating

When you hear this noise, does braking have an effect on it? Do you hear it all the time while driving? If your car is sitting still and running, do you hear the noise? Do you hear this while changing...

TPMS Service light

Hello. Thank you for writing in. The vehicle is having issues recognizing the tires that were switched. These monitoring systems can be sensitive to changes and the smallest of damages. Chances are they just need to be reset. A technician...

Still burning oil - CCV replaced - No smoke at startup/while driving I'm burning through roughly 1 qt. oil every 600-800 miles. Al

Hello. You should start by checking your antifreeze. If your antifreeze is too low, your car could just be compensating for the coolant its missing. I always put 1/2 of a can of Seafoam in my engine before doing...

High voltage alternator

Most alternators have a voltage regulator integrated within them. This voltage regulator is responsible for making sure that the battery is charged right around 14 volts. If your alternator is producing 17 volts, it is almost a certainty that the...

2011 Scion XB ECM replacement cost.

Hi there. The time to replace an ECM (Engine Control Module) on a 2011 Scion xB with a L4-2.4L engine is around 1 to 2 hours not including programming the ECM. ____________________________________________ Billing question was sent to CS for the...

The service advance track light comes on periodically.

There is a technical bulletin to reprogram the power train control module for your specific vehicle. The bulletin number is 13-1-15. Contact your local dealer to diagnose the warning light being on and they will also be able to reprogram...

Related articles

How to Replace a Hatch Lock Cylinder
Replacing a hatch lock cylinder requires careful attention and only a few tools. You can complete the task in about an hour.
5 Comfortable Sports Cars Your Parents Won't Complain About Riding In
The most comfortable sports cars combine high performance with a smooth ride. Options include the Alpina B6, Audi S8 Plus, and Mercedes-AMG S65.
How to Replace a Serpentine Belt
Replacing the serpentine belt can be challenging, as it involves removing the tensioner and determining the correct route to install the new belt.