Volkswagen GTI Control Arm Assembly Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(196)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(196)

Control Arm Assembly Replacement Service

How much does a Control Arm Assembly Replacement cost?

On average, the cost for a Volkswagen GTI Control Arm Assembly Replacement is $228 with $60 for parts and $168 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2015 Volkswagen GTIL4-2.0L TurboService typeControl Arm Assembly - Rear Upper Left ReplacementEstimate$391.34Shop/Dealer Price$447.00 - $604.24
2016 Volkswagen GTIL4-2.0L TurboService typeControl Arm Assembly - Front Upper Right ReplacementEstimate$808.00Shop/Dealer Price$930.27 - $1287.60
2012 Volkswagen GTIL4-2.0L TurboService typeControl Arm Assembly - Front Lower Left ReplacementEstimate$559.09Shop/Dealer Price$657.29 - $946.89
2018 Volkswagen GTIL4-2.0L TurboService typeControl Arm Assembly - Rear Upper Left ReplacementEstimate$294.95Shop/Dealer Price$327.12 - $418.61
2015 Volkswagen GTIL4-2.0L TurboService typeControl Arm Assembly - Front Lower Right ReplacementEstimate$600.57Shop/Dealer Price$710.91 - $1032.94
2013 Volkswagen GTIL4-2.0L TurboService typeControl Arm Assembly - Rear Upper Left ReplacementEstimate$380.53Shop/Dealer Price$434.26 - $590.06
2013 Volkswagen GTIL4-2.0L TurboService typeControl Arm Assembly - Rear Lower Left ReplacementEstimate$429.01Shop/Dealer Price$494.71 - $686.76
2018 Volkswagen GTIL4-2.0L TurboService typeControl Arm Assembly - Front Lower Left ReplacementEstimate$1302.41Shop/Dealer Price$1586.44 - $2433.53
Show example Volkswagen GTI Control Arm Assembly Replacement prices

What is a control arm and how does it work?

A control arm is a suspension component, usually made of heavy gauge steel or aluminum, that links the steering knuckle in the front — or axle carrier in the rear — to the frame of the vehicle. Many vehicles have upper and lower control arms. The inboard link(s) of the arm securely bolt to the frame of the vehicle through rubber bushings, while the outboard link of the control arm connects to the steering knuckle through a ball joint; all of which allow the control of the up and down movement of the steering knuckle or axle carrier. This minimizes the transmission of shock and vibration to the vehicle’s body.

When to consider replacing a control arm:

The structural portion of the control arm can last the life of the vehicle — except for cases of corrosion or crash damage. However, the rubber bushings and the ball joint in a control arm have a limited life. A mechanic should investigate if you notice:

  • Wheel alignment difficulties. Should the bushings, or the ball joint, in a control arm be worn, it will be impossible to properly align the vehicle. The worn components, or the entire arm, must be replaced.
  • Vehicle won’t track straight or pulls to one side. A car will not track straight and may require constant steering correction if there is a worn, bent, or loose control arm.
  • Clunking or squeaking noise. A loose control arm, or a control arm with dried out, rotted, or loose bushings, may move enough to cause detectable noise from the suspension as you go over bumps in the road.
  • Vehicle pulls to one side only when braking. Worn bushings or ball joints can allow control arm to shift when braking, causing the vehicle to pull to one side. Although, this could also be caused by brake calipers.

How do mechanics replace a control arm?

  • The vehicle is raised and supported on steel jack stands, and the wheel and tire assembly is removed.
  • Stabilizer bar links are detached from the control arm, if applicable. ABS wiring to the wheel speed sensor, if routed along the arm, is disconnected.
  • Control arm mounting bolts are detached from the frame and from the axle carrier if the control arm is in the rear.
  • For front control arms connected to the steering knuckle via a ball joint, the nut is removed from the ball joint stud and the stud is pushed through the steering knuckle to free the arm.
  • The arm is lowered from the vehicle and examined by the mechanic to confirm that the noise, or other problem, actually originated from a defect in the arm.
  • The new arm is installed using new mounting bolts if required by the service manual. In many cases, the fasteners must be tightened with the vehicle weight on the suspension in order to ensure the bushings are in a neutral, or resting, position.
  • The vehicle is lowered and road tested to confirm the problem is resolved. Replacing a control arm will change the vehicle alignment settings and the mechanic will refer you to a professional alignment shop to have the vehicle alignment set to factory specifications.

Is it safe to drive with a control arm problem?

No. If the car wanders on the road, pulls to one side, or noise from the suspension is loud, you need to schedule repair right away. Should the problem be limited to low levels of noise, such as clunking or squeaking, continued use of the car is reasonable until you can schedule a repair. Should the control arms be damaged as a result of a collision, it would be unsafe to drive the car until it is repaired.

When replacing a control arm keep in mind:

  • The number of control arm types vary from vehicle to vehicle depending on the design of the vehicle suspension.
  • Control arms should be replaced in pairs — arms on both sides of a front or rear axle — if the reason for replacement is worn control arm bushings or a worn ball joint.
  • All other suspension components should be inspected when control arms are replaced because looseness, damage, or excessive wear in other parts of the suspension system will make it impossible to perform a wheel alignment after the control arms are replaced.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Volkswagen mechanics

Real customer reviews from Volkswagen owners like you.

Excellent Rating

(196)

Rating Summary
186
7
0
0
3
186
7
0
0
3

David

17 years of experience
639 reviews
David
17 years of experience
Volkswagen GTI L4-2.0L Turbo - Brake Rotor/Disc Replacement (Front) - Oakley, California
David did a good job. He is very professional and knowable. I will use his service again.

Peter

44 years of experience
1397 reviews
Peter
44 years of experience
Volkswagen GTI L4-2.0L Turbo - Check Engine Light is on - Phoenix, Arizona
Peter was great. He arrived on time, ran the diagnostic to assess the problem, and informed me of next steps. I am currently booking the service to complete the repair...

James

32 years of experience
705 reviews
James
32 years of experience
Volkswagen GTI L4-2.0L Turbo - Oil Change - Long Beach, California
He's just great and a pro.

Angel

6 years of experience
237 reviews
Angel
6 years of experience
Volkswagen GTI L4-2.0L Turbo - Spark Plug Replacement - Crofton, Maryland
Angel arrived a little before the scheduled time, but he called me when he arrived and was polite. He informed me whether I needed all of the services I asked for and recommended others to help with my vehicle problems. He informed me that I didn't need all that I asked for and saved me some money. He was quick, left his work area clean, and was pleasant to talk to. I hope to work with him again.

Excellent Rating

(196)

Rating Summary
186
7
0
0
3
186
7
0
0
3
Number of Volkswagen GTI services completed
2156+
services done by our mechanics
TOTAL NUMBER OF EXPERT Volkswagen MECHANICS
1000+
experts on our platform

Recent articles & questions

P2444 OBD-II Trouble Code: Secondary Air Injection System Pump Stuck On Bank1
P2444 P2444 code definition The P2444 diagnostic trouble code is an indication that the bank 1 secondary air injection system pump is stuck. Related Trouble Codes: P2445 OBD-II Trouble Code: Secondary Air Injection System Pump Stuck Off Bank 1 P2446...
How to Become a Certified Mobile Vehicle Inspector (State Car Inspector Certified) in Missouri
Automotive technician jobs include mobile vehicle inspectors. Learn how to do car checks through Missouri State Highway Patrol.
How to Register a Car in Wyoming
In In order for a person to get back and forth to their job, they will need a car. If you are making a move to Wyoming, then you will need to do everything you can to ensure your car...

Reverse lights come on when I start the engine

Hello. It is possible that the reverse light wiring is faulty, or that the light bulb sockets are damaged in some way. However, it is more likely that there is an issue with the neutral safety switch (https://www.yourmechanic/com/services/neutral-safety-switch-replacement), and it...

Stabilitrak & traction control service message with reduced engine power

It sounds like your traction control system may have some faults in it such as a faulty control module or potentially faulty wheel or angle sensors. The traction control system works by reducing engine speed and determining which wheel to...

I need the location for the oIL pressure sensor on the wife's 2013 ford flex

The switch is threaded into the engine block toward the front of the car. You may have to remove the underbody cover to see it and get physical access with the special socket that is used to remove this style...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com