Suzuki Samurai Cooling Fan Relay Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(8)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(8)

Cooling Fan Relay Replacement Service

How much does a Cooling Fan Relay Replacement cost?

On average, the cost for a Suzuki Samurai Cooling Fan Relay Replacement is $126 with $31 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1994 Suzuki SamuraiL4-1.3LService typeCooling Fan Relay ReplacementEstimate$177.35Shop/Dealer Price$202.94 - $257.21
1987 Suzuki SamuraiL4-1.3LService typeCooling Fan Relay ReplacementEstimate$157.35Shop/Dealer Price$182.96 - $237.24
1989 Suzuki SamuraiL4-1.3LService typeCooling Fan Relay ReplacementEstimate$157.35Shop/Dealer Price$182.96 - $237.24
1988 Suzuki SamuraiL4-1.3LService typeCooling Fan Relay ReplacementEstimate$157.35Shop/Dealer Price$182.94 - $237.20
1992 Suzuki SamuraiL4-1.3LService typeCooling Fan Relay ReplacementEstimate$157.35Shop/Dealer Price$182.97 - $237.27
1985 Suzuki SamuraiL4-1.3LService typeCooling Fan Relay ReplacementEstimate$157.35Shop/Dealer Price$182.96 - $237.24
1995 Suzuki SamuraiL4-1.3LService typeCooling Fan Relay ReplacementEstimate$162.35Shop/Dealer Price$187.82 - $242.00
1993 Suzuki SamuraiL4-1.3LService typeCooling Fan Relay ReplacementEstimate$162.35Shop/Dealer Price$188.19 - $242.66
Show example Suzuki Samurai Cooling Fan Relay Replacement prices

What is the Cooling Fan Relay all about?

Modern vehicles employ electric cooling fans to draw air into the engine compartment, through the radiator, and into the air conditioning condenser. This action removes heat from the coolant in the radiator and pulls heat from the refrigerant in the air conditioning condenser. The electric cooling fan is an electric motor with fan blades attached to it. It turns on when the powertrain control module receives a signal that the temperature of the engine or air conditioning warrants the extra flow of air.

The powertrain control module then sends a signal for the cooling fan relay to supply power to the cooling fan. The fan motor relay performs the action of a switch, sending 12-volt power to the cooling fan and initiating its operation. Once the engine temperature drops below the threshold programmed into the powertrain control module, the cooling fan turns off. In some makes and models, the cooling fan can continue running after the engine has been shut off, or it can turn on while the ignition is off. If the cooling fan relay is faulty, the cooling fan can continue to run unnecessarily, even when the ignition is off and the engine is cold. Conversely, the cooling fan may not run at all causing the engine to overheat. Since the cooling fan plays a factor in air conditioning performance, your air conditioning may not blow cold air.

Keep in mind:

  • The cooling fan can run even with the ignition off. Use caution when working in and around the cooling fan to prevent personal injury.
  • Some vehicles are equipped with two cooling fans, with separate cooling fan relays controlling each one.

How it's done:

  • The Cooling Fan Relay is verified that it needs to be replaced. The main access relay panel is open to access the cooling fan relay.

  • The defective Cooling Fan Relay is removed from the relay box by pulling straight up and out of the connection.

  • The connection is checked for any damage or overheating. The new Cooling Fan Relay is installed by lining up the pins and pressing it into the connection.

  • The Cooling Fan Relay is tested for operation by running the engine or turning on the A/C.

  • The vehicle is tested for proper operation of the Cooling Fan during a road test.

Our recommendation:

The cooling fan relay is meant to last indefinitely, but as with all electrical components, it can fail prematurely. There are no preventative measures you can take against its failure. If your engine temperature rises into the red zone, or if the cooling fan won’t quit operating, have one of our expert technicians diagnose the problem and replace the cooling fan relay if required.

What common symptoms indicate you may need to replace the Cooling Fan Relay?

  • Engine temperature runs higher than normal or overheats
  • Air-conditioning does not function
  • Cooling fan continues to run indefinitely

How important is this service?

The electric cooling fan plays an important role to control engine temperature. In a situation where the cooling fan will not turn on, overheating and engine damage can occur. If the cooling fan runs continuously, the fan motor can burn out or electrical drain can deplete your battery. If the cooling fan relay is faulty, have it replaced as soon as possible to prevent additional, expensive repairs.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Suzuki mechanics

Real customer reviews from Suzuki owners like you.

Excellent Rating

(8)

Rating Summary
8
0
0
0
0
8
0
0
0
0

Jonathan

22 years of experience
304 reviews
Jonathan
22 years of experience
Suzuki Samurai L4-1.3L - Car is not starting - Denver, Colorado
Very good- professional and knowledgeable

Frank

27 years of experience
66 reviews
Frank
27 years of experience
Suzuki Samurai L4-1.3L - Pre-purchase Car Inspection - Denver, Colorado
Incredibly thorough and communicative. Had him take a look at an old Suzuki Samurai and even though the car is nearly 30 years old, Frank was more than familiar with all of it's workings and quirk.

Chris

22 years of experience
2266 reviews
Chris
22 years of experience
Suzuki Samurai L4-1.3L - Starter - Lake Elsinore, California
Quick and easy! Knows his craft, he will be my mechanic from on.

Grzegorz

41 years of experience
473 reviews
Grzegorz
41 years of experience
Suzuki Samurai L4-1.3L - Axle Shaft Seal Replacement (Front) - San Bruno, California
Gregory did an excellent job on my Samurai. He was also very patient in explaining all the work involved and helpful through the whole process.

Excellent Rating

(8)

Rating Summary
8
0
0
0
0
8
0
0
0
0
Number of Suzuki Samurai services completed
88+
services done by our mechanics
TOTAL NUMBER OF EXPERT Suzuki MECHANICS
300+
experts on our platform

Recent articles & questions

The Best Used Cars to Buy for Highway Driving
Do Do you spend hours each week on the highway for work? Maybe you just live in a very rural area and have to drive for 30 or 45 minutes to get to the grocery store. Whatever the case, your...
How Long Does a Windshield Washer Pump Last?
In In order for a person to be able to see where they are going on the road, their windshield will have to be clean. Without a clear line of sight, it will be very hard for a person to...
Windshield Laws in Massachusetts
Massachusetts Massachusetts motorists are required to follow a variety of traffic laws when driving on the roads and highways throughout the state. However, in addition to those road rules, drivers must also ensure that the windshield on their vehicle is...

I currently have a 2008 BMW X3 3.0 si. It has the BMW business stereo in it. This morning I went to go leave for work and the stereo stopped working.

First check the fuse to the stereo and see if its burned. If the fuse is burned, replace the fuse and check the wiring on the radio and see if there is anything loose. If the fuse is good, then...

Need to add oil every 750 miles or so.

If the car is burning oil, you may notice a bi of blue smoke coming from the exhaust. Blue smoke coming from your exhaust (https://www.yourmechanic.com/services/smoke-from-engine-or-exhaust-inspection) generally means that the motor is burning the engine oil. This can happen for a...

I changed out my [ac compressor](/topics-ac-compressor-ford/) and I’m not getting any cod air . The ac clutch was screaming and it wasn’t cooling right before I decided to change the compressor. I vacuumed the system and pressure tested and did everything correct. I also changed out the orif tube. The compressor is engaging and full of Freon . Gauges show the same on low and high

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com