Suzuki Reno Exhaust Gas Recirculation/EGR Valve Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(16)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(16)

Exhaust Gas Recirculation/EGR Valve Replacement Service

How much does a Exhaust Gas Recirculation/EGR Valve Replacement cost?

On average, the cost for a Suzuki Reno Exhaust Gas Recirculation/EGR Valve Replacement is $692 with $552 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2006 Suzuki RenoL4-2.0LService typeExhaust Gas Recirculation/EGR Valve ReplacementEstimate$1269.94Shop/Dealer Price$1552.28 - $2391.18
2007 Suzuki RenoL4-2.0LService typeExhaust Gas Recirculation/EGR Valve ReplacementEstimate$1260.93Shop/Dealer Price$1541.50 - $2379.08
2005 Suzuki RenoL4-2.0LService typeExhaust Gas Recirculation/EGR Valve ReplacementEstimate$1249.61Shop/Dealer Price$1527.37 - $2356.48
2008 Suzuki RenoL4-2.0LService typeExhaust Gas Recirculation/EGR Valve ReplacementEstimate$1260.93Shop/Dealer Price$1541.52 - $2379.12
Show example Suzuki Reno Exhaust Gas Recirculation/EGR Valve Replacement prices

What is the Exhaust Gas Recirculation/EGR Valve all about?

The EGR (Exhaust Gas Recirculation) valve helps lower the car’s exhaust emissions (gases from the tailpipe). It recirculates the portion of the gasses coming out of the engine by putting in back into the intake manifold, where the engine can burn it again, thereby reducing the emissions.

The EGR valve is located in the engine compartment (underneath the hood). Most engines require exhaust gas recirculation to meet emissions standards. If the EGR valve has gone bad, the car will not pass emissions.

Exhaust Gas Recirculation Valve

Keep in mind:

During the EGR valve replacement, your mechanic should also inspect the vacuum hoses connected to the EGR valve. If the vacuum hoses are cracked (leaking), the EGR valve will not function properly.

How it's done:

  • Scan the computer system in the car.
  • Check all vacuum related hoses to EGR valve.
  • Test EGR transducer.
  • Verify the EGR port is not plugged.
  • Remove and replace the EGR valve.
  • Clean the carbon deposit on EGR pintle.
  • Clear the trouble codes and test for proper operation of EGR valve.

Our recommendation:

It is a good idea to get an air induction (carbon cleaning) service performed every 50,000 miles. This will clean out any sludge or carbon build up in the air intake system. Always keep up with regular oil changes; it will help prevent sludge build up in the engine.

What common symptoms indicate you may need to replace the Exhaust Gas Recirculation/EGR Valve?

  • Check Engine light is on.
  • Possible loss of power.
  • Car will not run smoothly (shake, stumble, may stall).

How important is this service?

The EGR valve helps your vehicle recycle gas. The EGR valve is responsible for taking the gas that comes out of the engine, and sending it through the intake manifold, where the engine can utilize it again. Without the EGR valve your vehicle will not recycle and reuse any of its gas, which increases the emissions. Without the EGR, your car will not pass an emission inspection.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Suzuki mechanics

Real customer reviews from Suzuki owners like you.

Excellent Rating

(16)

Rating Summary
16
0
0
0
0
16
0
0
0
0

Joel

15 years of experience
1142 reviews
Joel
15 years of experience
Reno 2007 - Car starts and then dies - Jacksonville, FL
First guy in a long time where i honestly felt like I could trust his professional recommendation. Thanks Joel

Theodore

10 years of experience
1656 reviews
Theodore
10 years of experience
Reno 2006 - Clutch Master Cylinder - SeaTac, WA

Theodore

10 years of experience
1656 reviews
Theodore
10 years of experience
Reno 2006 - Strut Assembly - SeaTac, WA

Excellent Rating

(16)

Rating Summary
16
0
0
0
0
16
0
0
0
0
Number of Suzuki Reno services completed
176+
services done by our mechanics
TOTAL NUMBER OF EXPERT Suzuki MECHANICS
300+
experts on our platform

Recent articles & questions

Symptoms of a Bad or Failing Shock Absorber
Common signs include vibrations while driving, swerving or nose diving when braking, longer stopping time, uneven tire wear, and leaking fluid.
How to Troubleshoot a Car With Clutch Noise
Clutch systems create noise if there is a damaged clutch master cylinder, clutch pedal, pressure plate, clutch disc, flywheel, or pilot bearing.
P0104 OBD-II Trouble Code: Mass Airflow (MAF) Electrical Circuit Erratic and Irregular Output
P0104 P0104 Trouble code definition Mass Airflow (MAF) Electrical Circuit Erratic and Irregular Output The Code P0104 code is often associated with a P0100, P0101, P0102 and P0103 codes. What the P0104 code means P0104 is the code for issues...

What is the Belt-Minder® system?

Your car has a lot of advanced features. One of those is the Belt-Minder® system. Basically, it’s designed to track seat belt use in your car and alert you to potential problems, keeping you and your passengers safer. The Belt-Minder®...

If my car leaks oil and if i use synthetic will it leak more

The consensus in the industry does seem to be that existing leaks will leak more, to some degree, with the use of synthetic oil. This is ONLY the case if you have existing leaks and how much more of a...

Shifter lever will not move

The clutch must be functioning to shift the gears, that is you must be able to activate the release lever (hydraulically in your case) to disengage the pressure plate, and thence friction material, from the flywheel. Once you are able...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com