Mercedes-Benz 500E Automatic Shutdown Relay Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(5,626)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(5,626)

Automatic Shutdown Relay Replacement Service

How much does a Automatic Shutdown Relay Replacement cost?

On average, the cost for a Mercedes-Benz 500E Automatic Shutdown Relay Replacement is $114 with $19 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1993 Mercedes-Benz 500EV8-5.0LService typeAutomatic Shutdown Relay ReplacementEstimate$153.15Shop/Dealer Price$180.19 - $221.94
1992 Mercedes-Benz 500EV8-5.0LService typeAutomatic Shutdown Relay ReplacementEstimate$133.15Shop/Dealer Price$160.22 - $201.99
Show example Mercedes-Benz 500E Automatic Shutdown Relay Replacement prices

What is the Automatic Shutdown Relay all about?

When you turn the key for your ignition to start, many different things happen. The fuel pump turns on, sending gas from the tank, through the lines, to the injectors. The battery sends voltage to the ignition system, which creates a spark, igniting fuel vapor and starting your engine. However, if the automatic shutdown relay (ASD) is not working, none of this will happen.

The automatic shutdown relay controls the power that is supplied to the ignition, the fuel pump, and the injectors, as well as other components. It is only activated for a few seconds during cranking, and is then turned off. Depending on the make and model in question, the automatic shutdown relay could be located under the hood, under the dash, or in another position.

As with any other electrical component, your automatic shutdown relay is subject to wear and tear, and frequent stopping and starting of the engine will exacerbate that wear. Eventually, it will fail and you’ll be left with a vehicle that doesn’t crank.

Keep in mind:

  • The ASD relay is not inspected during normal maintenance, and will only be checked during diagnostics for problems with the vehicle not cranking.
  • Many other problems can cause your engine not to crank, so professional diagnosis is necessary.
  • ASD failure is relatively rare, but it does happen.

How it's done:

  • The automatic shutdown relay is verified to see if it needs to be replaced
  • The defective automatic shutdown relay is removed
  • The new automatic shutdown relay is installed
  • The automatic shutdown relay is tested for operation
  • The vehicle is tested to ensure proper operation of the automatic shutdown relay

Our recommendation:

Your automatic shutdown relay provides power for some of the most important systems on your vehicle during ignition. If it fails, your engine will not crank, and it cannot be jumpstarted. If you are experiencing a no start condition, it may be the ASD relay, but it could be another problem. Seek immediate professional diagnosis and replacement by one of our expert mechanics.

What common symptoms indicate you may need to replace the Automatic Shutdown Relay?

  • Engine will not start
  • Check Engine light is on
  • Engine starts but stalls and dies

How important is this service?

Without an operational automatic shutdown relay, your engine will not start, which means your vehicle is not able to move. However, there are many other problems that can create the same symptom, ranging from a dead battery to a damaged battery, or a damaged cable to a failed main relay. If your automatic shutdown relay has failed, you will have to replace it before your vehicle will operate again.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mercedes-Benz mechanics

Real customer reviews from Mercedes-Benz owners like you.

Excellent Rating

(5,626)

Rating Summary
5,236
189
54
28
119
5,236
189
54
28
119

Wayne

23 years of experience
65 reviews
Wayne
23 years of experience
Mercedes-Benz GL450 V8-4.6L - Window is not working - Seattle, Washington
On time, knowledgeable, and a great personality!

Charles

34 years of experience
342 reviews
Charles
34 years of experience
Mercedes-Benz ML320 V6-3.2L - Oil Change - Austin, Texas
He was ver nice and did a great service!

Rigoberto

11 years of experience
739 reviews
Rigoberto
11 years of experience
Mercedes-Benz CLS500 V8-5.0L - Air Filter - Chicago, Illinois
He was fantasic ...Great job...very good work.

Steven

16 years of experience
97 reviews
Steven
16 years of experience
Mercedes-Benz SL500 V8-5.0L - Pre-purchase Car Inspection - Sacramento, California
a job well done!!! saved me from making a $23,000 mistake plus $3500 in repairs. thanks Steven. Your New Best Friend.

Excellent Rating

(5,626)

Rating Summary
5,236
189
54
28
119
5,236
189
54
28
119
Number of Mercedes-Benz services completed
61886+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mercedes-Benz MECHANICS
1100+
experts on our platform

Recent articles & questions

How Long Does a Transfer Case Output Shaft Seal Last?
The The transfer case output shaft seal is located on the transfer case of vehicles with four-wheel drive. This transfer case allows you to switch between two-wheel drive, neutral, to, low four-wheel, and drive four-wheel drive. The case consists of...
P2016 OBD-II Trouble Code: Intake Manifold Runner Position Sensor/Switch Circuit Low Bank 1
P2016 P2016 code definition Intake Manifold Runner Position Sensor/Switch Circuit Low Bank 1 What the P2016 code means P2016 is an OBD-II generic code for the Engine Control Module (ECM) detecting a low voltage failure in the intake manifold runner...
P2509 OBD-II Trouble Code: ECM/PCM Power Input Signal Intermittent
P2509 P2509 code definition The P2509 diagnostic trouble code is an indication that the ECM/PCM power input signal is having an intermittent problem. Related Trouble Codes: P2505 OBD-II Trouble Code: ECM/PCM Power Input Signal P2506 OBD-II Trouble Code: ECM/PCM Power...

Instruments, interior lights, radio, and power windows not working.

I would test all your fuses and make sure they are all good. There should be one for the instrument cluster and interior lights. Have a mechanic from YourMechanic do it if you are unsure how.

Alarm going off when I jump my battery

When a battery goes dead, a lot of times the computer operates on the mode it went to sleep in. For example, if the doors are locked, the alarm becomes set. When it is woken up, the car assumes a...

BMW shakes a little at lower speeds and rpms

Hello, thank you for writing in. Shaking can come from a variety of components. Unfortunately in a situation like this, you will have to take it one step at a time if nothing is found to be physically damaged upon...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com