Mazda 2 Brake Vacuum Pump Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(62)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(62)

Brake Vacuum Pump Replacement Service

How much does a Brake Vacuum Pump Replacement cost?

On average, the cost for a Mazda 2 Brake Vacuum Pump Replacement is $563 with $468 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2013 Mazda 2L4-1.5LService typeBrake Vacuum Pump ReplacementEstimate$1050.31Shop/Dealer Price$1294.14 - $2003.13
2011 Mazda 2L4-1.5LService typeBrake Vacuum Pump ReplacementEstimate$1030.31Shop/Dealer Price$1274.16 - $1983.16
2014 Mazda 2L4-1.5LService typeBrake Vacuum Pump ReplacementEstimate$1030.31Shop/Dealer Price$1274.16 - $1983.16
2012 Mazda 2L4-1.5LService typeBrake Vacuum Pump ReplacementEstimate$1030.31Shop/Dealer Price$1274.14 - $1983.12
Show example Mazda 2 Brake Vacuum Pump Replacement prices

What is the Brake Vacuum Pump all about?

The brake booster is a device that helps enhance the effects of the hydraulic braking system in cars as a supplement to the primary braking mechanism. Each time you push the brake pedal, the force transfers to a rod. This rod passes through the brake booster and reaches the master cylinder. The pressure from the rod activates the master cylinder piston and works on the hydraulic braking systems.

The brake booster chamber contains a vacuum the engine creates. This chamber has two sections, separated vertically by way of a rubber diaphragm. When the brake pedal pushes the rod, a small amount of air is let into the chamber on the brake pedal side through a valve that also seals off the vacuum. This air pressure on one side of the diaphragm helps enhance the force of the brake.

However, in case of cars that have turbo charging or use diesel as fuel, the engine does not create the necessary vacuum. Thus, they need an additional brake booster vacuum pump to draw out the air and create the vacuum needed for the brake booster to function. Vehicles that typically run in locations of high altitude also need a brake booster vacuum pump.

The brake booster vacuum pump reduces dependency on the engine for the vacuum and can work independently of it. This device uses an electrical control circuit to work. It activates with a signal from the brake booster vacuum sensor that monitors the levels of the vacuum in the brake booster.

Keep in mind:

  • The brake booster vacuum pump should be able to maintain up to 18” of vacuum for the brake booster to be effective.
  • If you notice that the pedal has slipped to the floor of the car and you hear a hissing sound, this could be an indication of a leak in the air line or pump to the brake booster vacuum pump.

How it's done:

  • The battery is disconnected. The faulty brake booster vacuum pump is located and identified. The vehicle is raised and supported on jack stands as needed. The engine under shield is removed for access.

  • The brake booster vacuum pump hoses and electrical connector are disconnected. The brake booster vacuum pump is removed from the mounting bracket.

  • The new brake booster vacuum pump is installed onto the mounting bracket. The hoses and electrical connector are installed to the new brake booster vacuum pump. The battery is reconnected.

  • The brakes are tested for proper brake booster vacuum pump operation. The engine shield is reinstalled. The vehicle is removed from the jack stands.

  • The vehicle is road tested and checked for proper brake booster vacuum pump and brakes operation.

Our recommendation:

If you notice the brakes are not responding as they should, book an appointment with one of our expert mechanics and have the brake booster system completely inspected. The mechanic will check the brake booster vacuum pump for damage and advise you if it needs replacing. Refer to the owner’s manual for recommendations on the frequency in which you must have the brake booster vacuum pump replaced.

What common symptoms indicate you may need to replace the Brake Vacuum Pump?

  • Delayed brake response
  • Excessive pressure is needed to make the brake respond
  • A hissing sound when you press the brake pedal
  • Brake pedal slips to the floor of the car when the engine is running and the car is stationary
  • Braking becomes especially difficult in heavy traffic areas when the brakes need to be applied in quick succession

How important is this service?

A malfunctioning brake booster vacuum pump will not create the adequate vacuum needed for the brake boosters or power brakes to function. This undermines the effectiveness of your brakes and can be a safety hazard.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mazda mechanics

Real customer reviews from Mazda owners like you.

Excellent Rating

(62)

Rating Summary
57
3
1
0
1
57
3
1
0
1

Whitney

39 years of experience
783 reviews
Whitney
39 years of experience
Mazda 2 L4-1.5L - Oil Change - Burlingame, California

Trung

12 years of experience
412 reviews
Trung
12 years of experience
Mazda 2 L4-1.5L - Oil Change - San Jose, California
Great work!

Peter

25 years of experience
523 reviews
Peter
25 years of experience
Mazda 2 L4-1.5L - Serpentine/Drive Belt Replacement - Van Nuys, California
Will always request Peter!!! He’s great

Rick

47 years of experience
43 reviews
Rick
47 years of experience
Mazda 2 L4-1.5L - Oil Change - Denver, Colorado
Terrific and very helpful! Will definitely hire him again!

Excellent Rating

(62)

Rating Summary
57
3
1
0
1
57
3
1
0
1
Number of Mazda 2 services completed
682+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mazda MECHANICS
1100+
experts on our platform

Recent articles & questions

How Long Does a Water Pump Pulley Last?
The The pulleys and drive belts on a car help to ensure that everything is getting the power it needs. Without these components working properly, a car will usually not be able to run at all. The water pump pulley...
How to Replace an AC Line
AC hoses are failing if the air conditioning system is not blowing cold air or the air is leaking out of the AC lines.
How to Replace a Steering Angle Sensor
A steering angle sensor fails if the Traction Control Light illuminates, the steering wheel feels loose, or the vehicle drives differently.

How do you control the Speed Control system?

While the Speed/Cruise control on your car offers a lot of convenience, it’s important that you understand how to control various aspects, and what your input might result in, in terms of vehicle performance. Here’s what you should know: You...

Temp gauge goes up and down

Hi there. The temperature sensor is the device used to determine the estimated engine coolant temperature reading. The sensor itself is not always perfect. This device sends a signal to the computer and in some cases, the instrument cluster as...

Truck is not getting fuel until holding the ignition in for a few seconds.

You may very well be on the right track with this and you should check the control module to be sure. You may also want to check the fuel pressure regulator (https://www.yourmechanic.com/services/fuel-pressure-regulator-replacement) as well to be sure you are getting...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com