Ford Aspire Power Steering Pump Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(8)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(8)

Power Steering Pump Replacement Service

How much does a Power Steering Pump Replacement cost?

On average, the cost for a Ford Aspire Power Steering Pump Replacement is $419 with $324 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1996 Ford AspireL4-1.3LService typePower Steering Pump ReplacementEstimate$762.43Shop/Dealer Price$934.29 - $1427.37
1995 Ford AspireL4-1.3LService typePower Steering Pump ReplacementEstimate$742.43Shop/Dealer Price$914.31 - $1407.40
1994 Ford AspireL4-1.3LService typePower Steering Pump ReplacementEstimate$742.43Shop/Dealer Price$914.31 - $1407.40
1997 Ford AspireL4-1.3LService typePower Steering Pump ReplacementEstimate$742.43Shop/Dealer Price$914.29 - $1407.36
Show example Ford Aspire Power Steering Pump Replacement prices

What is the power steering pump and how does it work?

The power steering pump is a belt-driven or electric-driven hydraulic pump that generates the hydraulic pressure needed to provide power steering assist. It develops output pressures of 1,000 PSI or more. The pump output is directed to the steering gear, often a rack and pinion type unit, where the hydraulic pressure pushes on the steering rack, greatly reducing the effort it would otherwise take to turn the steering wheel.

Power Steering

When to consider replacing the power steering pump:

  • Groaning or whining noise when turning. Noise can occur if there is wear on the pump bearings or impeller vanes. A low fluid level or trapped air can also cause noises. If the pump has already been operating while dry, adding fluid may not resolve the noise and replacement of the pump might be necessary.
  • Power steering fluid leaks. Leaks can develop at pump seals, threaded connections, hoses, or on the steering rack and pinion unit. Pump seal leaks will generally require a replacement.
  • Difficult steering. Should you notice it is harder to turn the steering wheel, it might mean the power steering pump output pressure is too low, or there could be blockages in the pump or lines.
  • Damage to the pump pulley. Should the pump pulley become damaged or is loose on the pump shaft, you might detect vibration, drive belt damage, or hard steering. Either the pulley will have to be serviced or the pump assembly replaced.

How do mechanics replace the power steering pump?

  • If driven by a drive belt, the power steering pump is bolted to the engine via a bracket that allows for adjustment of the pump drive belt. Once the engine is cold, and safe to work on, the drive belt is removed.
  • If driven by an electric pump, the pump may be mounted in conjunction with the steering shaft or in conjunction with the steering rack. With either a drive belt or electric pump, removal of any dash, panel, or steering components is performed to access the pump.
  • The threaded connectors to the pump inlet and outlet are loosened and removed.
  • Any mounting bolts and brackets are removed so the pump can be removed.
  • If the old pump has failed catastrophically, or there is reason to suspect contaminants in the power steering hoses, the system is flushed.
  • The new pump is bolted on, the pressure and return hoses attached and the system is bled of all air. If pump is belt-driven, it is tightened to the manufacturer’s specification.
  • Finally, the engine is run and the car is road tested to confirm normal steering effort. If a new drive belt was installed, belt tension is measured again, and adjusted as needed, after the belt has run for a few minutes.

Is it safe to drive with a power steering pump problem?

No. If the power steering pump is operated without an adequate amount of fluid, and the pump reservoir will not hold fluid due to a large leak. The pump could seize, which would snap the serpentine belt and likely leave you stranded. If the pump turns and there is adequate fluid, but there is no power assist, it will require much greater effort to turn the steering wheel, and that presents inherent safety risks. Generally, the wisest course is to seek immediate repairs if you suspect a problem with any component in your car’s power steering system.

When replacing the power steering pump keep in mind:

  • Any belts driving the pump should be inspected and replaced as needed. The pump will only produce the required hydraulic pressure if it is driven by the belt at an adequate speed.
  • Power steering leaks from aged rubber hoses, particularly where the rubber is crimped to the steel tube, are not unusual and should be carefully inspected. The system operates under high pressure. The fluid is flammable, and if leaking fluid happens to contact a hot engine part, a fire might result. You always want to be sure the hoses and connections are sound.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Ford mechanics

Real customer reviews from Ford owners like you.

Excellent Rating

(8)

Rating Summary
8
0
0
0
0
8
0
0
0
0

Trung

12 years of experience
412 reviews
Trung
12 years of experience
Ford Aspire L4-1.3L - Oil Change - Union City, California
Trung is very proficient in getting the job done right the first time and arrives in a timely manner if not earlier than expected. Excellent Customer service! Highly recommend Trung for your vehicle repairs. Thanks Trung! AAA+++

Joel

21 years of experience
987 reviews
Joel
21 years of experience
Ford Aspire L4-1.3L - Axle / CV Shaft Assembly Replacement (Driver Side Front, Passenger Side Front) - Jacksonville, Florida
Joel is great- He showed up on time and completed the repair in exactly the time I had asked him how long he thought it would take. The cars running great again. I recommend Joel.

Matthew

33 years of experience
1210 reviews
Matthew
33 years of experience
Ford Aspire L4-1.3L - Car is overheating - Williamsburg, Virginia
diagnosed my car for me

Noe

36 years of experience
604 reviews
Noe
36 years of experience
Ford Aspire L4-1.3L - Other Inspections - Federal Way, Washington
Noe did an excellent job! He was quick and explained the problem in detail. The problem was very minor and did not require any replacement parts, so he had helped me save even more! He did an overall inspection of my vehicle as well, and let me know my car is in great shape. It makes me feel safe driving my vehicle! I highly recommend Noe's services!

Excellent Rating

(8)

Rating Summary
8
0
0
0
0
8
0
0
0
0
Number of Ford Aspire services completed
88+
services done by our mechanics
TOTAL NUMBER OF EXPERT Ford MECHANICS
1700+
experts on our platform

Recent articles & questions

How to Prepare for the South Carolina Driver’s Written Test
When When you are getting ready to learn how to drive so you can finally get out on the road, it is important to make sure you are well aware of what you need to do to prep for the...
How to Get Porsche Dealership Certified
Porsche car dealerships offer automotive technician jobs to mechanics who are Porsche certified through the Porsche Technology Apprentice Program.
How to Get Smog Technician Certified in Colorado
Automotive technician jobs include smog certified emissions inspectors. In Colorado, you need to work at an emissions testing station.

Sunroof stuck

While the information provided on the Honda Prelude is a bit limited, my experience with this car leads me to believe that the tilt function on the sunroof has stopped operating correctly. If the sunroof can open and close but...

Getting code P0135

Hello. A P0135 code indicates that there is a malfunction of the oxygen sensor/heat circuit. This problem could cause the car to burn more gas and over time, cause damage to the catalytic converter. When the oxygen sensor is replaced...

Is it possible when you lose a key to 2002 Ford Expedition with the pats system, to replace the brain and get a another key cut so that you don't have to use a key with chip any longer.

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com