logo

Ford Aspire Brake Drum Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(8)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

See availability

Customer Ratings

(8)

Brake Drum Replacement Service

How much does a Brake Drum Replacement cost?

On average, the cost for a Ford Aspire Brake Drum Replacement is $368 with $149 for parts and $218 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1996 Ford AspireL4-1.3LService typeBrake Drum ReplacementEstimate$668.78Shop/Dealer Price$792.86 - $1113.33
1995 Ford AspireL4-1.3LService typeBrake Drum ReplacementEstimate$622.78Shop/Dealer Price$746.90 - $1067.40
1994 Ford AspireL4-1.3LService typeBrake Drum ReplacementEstimate$517.18Shop/Dealer Price$614.89 - $856.20
1997 Ford AspireL4-1.3LService typeBrake Drum ReplacementEstimate$602.98Shop/Dealer Price$722.09 - $1027.71
Show example Ford Aspire Brake Drum Replacement prices

What are brake drums and how do they work?

A brake drum is a heavy, cast iron brake system part that looks like a shallow, several inches-high cylinder about 9 to 12 inches in diameter. The brake drum has a precisely machined surface all around the interior circumference, that the brake shoes make contact with when you apply the brakes, transmitting hydraulic pressure through the wheel cylinder. This forces the brake shoes outward against the interior of the brake drum, resulting in the friction that causes the car to slow. The brake drum is mounted over, and fully encloses, all of the rear brake components such as the wheel cylinder, springs and clips, brake shoes, and parking brake mechanism. The drum is commonly held to the wheel hub by the wheel and the lug nuts, but some configurations combine the drum with the wheel hub as one unit. Nowadays, a drum brake type system is only installed on the rear axle, if used at all, as 4 wheel disc type systems have become more common.

When to consider replacing brake drums:

  • Reduced braking effectiveness. If the brake drum is unevenly worn, scored or cracked, it will increase stopping distances. A cracked drum must be replaced outright but a worn drum can be restored on a brake lathe so long as enough metal material remains.
  • Pulsating brakes, pulling to one side, vibration or noise. If a brake drum is warped, is unevenly worn, or perhaps the brake shoes have worn down completely — creating metal-to-metal contact — you might detect pedal pulsation, the vehicle may pull to one side, or you might feel a vibration or hear a noise when you apply the brakes. The brake system will have to be inspected to pinpoint the exact problem.
  • Brake shoe replacement. Anytime the brake shoes are replaced, the drum must either be resurfaced or replaced outright. Installing new brake shoes on a used, unresurfaced drum will lead to poor results.
  • Loss of parking brake function. The parking brake locks the brake shoes against the brake drum. If the brake drum is cracked, the parking brake lever will pull up excessively and the car may still be able to roll. However, a more common circumstance is parking brake maladjustment or seizure of parking brake components. Repair of those problems will often require removal of the brake drum.

How do mechanics replace brake drums?

There are two options when it comes to brake drum service: outright replacement or resurfacing. In some cases, it is cheaper to replace the drum rather than refurbish it. In both cases though, the removal and installation procedure for the drum is the same.

  • Raise the vehicle and safely support it using steel jack stands.
  • Remove tire and wheel assembly.
  • Remove brake drum. Sometimes the brake drum has rusted to the wheel hub and removal of the drum will require a brake drum puller. In some cases, the wheel hub is integral to the brake drum, in which case the hub-bearing retaining bolt and the wheel bearing must be removed to replace the drum.
  • Measure the interior diameter of the machined surface in the drum with a brake drum micrometer or similar measuring tool. If sufficient metal exists to resurface the drum on a brake lathe, the mechanic will compare the cost of such restoration to the alternative: buying a new drum.
  • Prior to installing the resurfaced or new drum, the brake shoes, springs, wheel cylinder, parking brake mechanism, and backing plate are all inspected. All worn parts should be replaced. Generally, if drums have been replaced or resurfaced, new brake shoes should be installed. The worn shoes will cause irregular wear in the brake drum and reduce braking effectiveness.
  • The shoes are adjusted and the drum is installed. The wheel and tire assembly are installed and torqued in the proper sequence and the car is road tested to check the operation of the brakes.

Is it safe to drive with a brake drum problem?

No. Should there be a deficiency with the brake drums, stopping distances will not be as short as possible. In a panic stop, stopping just five or ten feet shorter could be the difference between no collision and a collision. Any deficiency in a vehicle’s braking system is a cause for concern and a potential safety issue. Have the brake drums inspected at your earliest convenience to determine if a problem exists and find out what must be done to fix it.

When replacing brake drums keep in mind:

  • With few exceptions, brake work on one end of an axle should be performed on both ends of the axle. Should a brake drum on one end of a front or rear axle be serviced, or brake shoes on one end are serviced, both sides of the axle should receive the same service. This helps to avoid problems, such as pulling, vibration, and so forth, once the vehicle is returned for use.
  • Brake drum systems use very powerful springs to keep the brake shoes in position. These springs are exposed to extreme heat. It is best practice to replace all springs whenever new shoes are installed. Should a spring unexpectedly break in the brake drum assembly, a mispositioned brake shoe could cause the brakes to grab and lock, which would pose a safety issue.
  • If the wheel hub and bearing are integral to the brake drum on your car, the mechanic may recommend replacement of the grease in the wheel bearings and inspection of the wheel bearings.
  • Since the arc of the brake shoes will not perfectly match with the arc of the drum when new, expect a bed-in period before maximum braking efficiency is achieved.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee

Number of Ford Aspire services completed
88+
services done by our mechanics
TOTAL NUMBER OF EXPERT Ford MECHANICS
1700+
experts on our platform
Yourmechanic was featured in

New York Times NBC CBS Forbes INC Tech Crunch

Learn more about us

Meet some of our expert Ford mechanics

Real customer reviews from Ford owners like you.

Excellent Rating

(8)
Rating Summary
8
0
0
0
0
8
0
0
0
0

Trung

12 years of experience
412 reviews
Request Trung
Trung
12 years of experience
Request Trung
by PERRY
Ford Aspire L4-1.3L - Oil Change - Union City, California
Trung is very proficient in getting the job done right the first time and arrives in a timely manner if not earlier than expected. Excellent Customer service! Highly recommend Trung for your vehicle repairs. Thanks Trung! AAA+++

Joel

21 years of experience
987 reviews
Request Joel
Joel
21 years of experience
Request Joel
by Nancy
Ford Aspire L4-1.3L - Axle / CV Shaft Assembly Replacement (Driver Side Front, Passenger Side Front) - Jacksonville, Florida
Joel is great- He showed up on time and completed the repair in exactly the time I had asked him how long he thought it would take. The cars running great again. I recommend Joel.

Noe

36 years of experience
604 reviews
Request Noe
Noe
36 years of experience
Request Noe
by Emilio
Ford Aspire L4-1.3L - Other Inspections - Federal Way, Washington
Noe did an excellent job! He was quick and explained the problem in detail. The problem was very minor and did not require any replacement parts, so he had helped me save even more! He did an overall inspection of my vehicle as well, and let me know my car is in great shape. It makes me feel safe driving my vehicle! I highly recommend Noe's services!

Matthew

33 years of experience
1247 reviews
Request Matthew
Matthew
33 years of experience
Request Matthew
by thomas
Ford Aspire L4-1.3L - Car is overheating - Williamsburg, Virginia
diagnosed my car for me

Excellent Rating

(8)
Rating Summary
8
0
0
0
0
8
0
0
0
0
Number of Ford Aspire services completed
88+
services done by our mechanics
TOTAL NUMBER OF EXPERT Ford MECHANICS
1700+
experts on our platform
Yourmechanic was featured in

New York Times NBC CBS Forbes INC Tech Crunch

Learn more about us

Recent articles & questions

How Long Does a Mass Airflow Sensor Last?
The The right amount of air and fuel in your engine is a vital component in keeping the engine running as it should. Making sure that all of the vital components of the air and fuel system are running at...
Read more
How to Get Smog Technician Certified in Arizona
Automotive technician jobs include smog certified emissions inspectors. In Arizona, you need to work at an emissions testing station.
Read more
How to Change a Radiator Valve
A radiator valve allows coolant into the radiator in order to cool off the engine once the coolant has reached a certain temperature.
Read more

Rough idle and hiccup back threw throttle body and causes smoke out breather

This is a common issue when what is called the idle air control valve (https://www.yourmechanic.com/services/idle-control-valve-replacement) is not working properly. This regulates air flow into the throttle body at idle speeds as it is mixed with fuel prior to being injected...
Read more

Car is puttering after driving in too high a gear. Stick Shift

Hi there. A situation like you've described could be caused by a sensor that has become loose or the electrical harness connected to it has fallen off. It's also common for an ignition coil pack to become loose when the...
Read more

My car would start and turn off. I was told by dealership that I had a bad fuel pump driver module. When replaced it did not fix

I would suggest having the alternator (https://www.yourmechanic.com/services/alternator-replacement) checked to determine if it is receiving the proper amount of voltage from something called the voltage regulator. The voltage regulator regulates the charging voltage that the alternator produces, keeping it between 13.5...
Read more
  1. Home
  2. Estimates
  3. Ford
  4. Aspire
  5. Brake Drum Replacement

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com

Read FAQ
GET A QUOTE