Q: how to remove stuck gas cap
Unable to remove gas cap when unscrewing it
Recommended Services
| Gas Cap Replacement | $102.91 - $258.49 | Get a Quote |
Hi there. Without knowing what type of car or truck you have, we’re not able to provide you with some tips on removing a stuck gas cap. However, in general, if the gas cap is stuck, it will be removed by a professional mechanic while they complete a gas cap replacement service.
The statements expressed above are only for informational purposes and should be independently verified. Please see our
terms of service
for more details
Get an instant quote for your car
Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing
What others are asking
Convertible top not working.
The first thing to do is to see if the convertible top fuse is ok. Then you should check that the power to and from the top switch is flowing. If both are ok then the power top motor should...
Engine won't stay running.
There happens to be two different fuel pressure specs depending on your VIN number if it has a 1 or a K for the 8th digit. The spec for the 1 is 48 to 54 psi and if yours is...
Turn signal malfunctioning, as well as other lights
The front control module controls all of the vehicle's lighting functions. From your description it sounds like this module is failing. However, before replacing the front control module, connectors and wiring should be checked to ensure there is no harness...
Autonomously control the electric power steering wheel of honda civic 9th gen 2013
I'm curious why you would want to do this and because of the potential liability with something like this. I'm going to say your on your own with such a project. When ever we decide we want to modify our...
My engine won't idle after replacing the fuel injectors.
This sounds like potentially a idle air control problem. There is a component called an idle air control valve that regulates the amount of air flow at idle. When this is not operating correctly, the engine will not idle as...
Why caution should be observe during compression test?
You should disable the fuel pressure pump and spark of the ignition. This way you do not burn out the ignition system and flood the engine with fuel. The best way to do a compression test (https://www.yourmechanic.com/article/how-to-do-a-compression-test-by-robert-tomashek) is to operate...
Cost to replace rear differential on a 2014 Tacoma TRD 4x4?
Billing question was sent to CS for the cost to replace the rear differential on a 2014 Toyota Tacoma TRD 4WD.
Location of bank 2 sensor 1 on a 2014 Ford Mustang 3.7L V6
Hi There, This oxygen sensor (https://www.yourmechanic.com/services/oxygen-sensor-replacement) is located on the passenger side of the vehicle in front of the catalytic converter (https://www.yourmechanic.com/services/catalytic-converter-replacement). If you need additional help replacing this, please reach out to us here at YourMechanic as we are...
What cause a catilac converter in 2009 nessain murnao go bad
There can be a few different reasons for a catalytic converter to fail. Your engine running too rich or lean or coolant in exhaust from a blown head gasket can cause failure. Also a defective converter that breaks apart and...
Related articles
How Long Does a Wiper Gearbox Last?
Having Having fully functional wipers is an essential part of getting around on the roadways safely. The wipers on a car can only work if a variety of different parts work together. The wiper gearbox is what helps to provide...
P0658 OBD-II Trouble Code: Actuator Supply Voltage “A” Circuit Low
P0658 means that there is a fault in the actuator supply voltage due to Shorted or open wires or damaged connectors in the PCM, or a control module.
P2314 OBD-II Trouble Code: Ignition Coil Secondary Number 5 Circuit Condition
P2314 means the secondary ignition burn time is either too short, incorrectly timed, or not present. This is usually due to a bad circuit issue.
Browse other content
Services
Maintenance