Skip the auto shop - Our mechanics make house calls

Q: How do you install a child seat with a tether?

asked by on

How do you install a child seat with a tether?

Your Accord is equipped with three anchor points above the back of the rear seat. You’ll need to remove the plastic covers to access the metal anchors, though. To install a child seat with a tether:

  • Install the seat where you want it, and then route the seat belt through it according to the manufacturer’s directions.

  • Lock the shoulder belt if using a shoulder/lap belt combo.

  • Raise the headrest and locate the plastic cap covering the anchor. Lift the front edge.

  • Attach the tether to the anchor point.

  • Tighten the anchor strap to remove slack.

Was this answer helpful?

Need advice from certified mechanic? Get help now!

Over 1000 mechanics are ready to answer your question.
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details

Ask a Mechanic
(100% Free)

Have a car question? Get free advice from our top-rated mechanics.

Ask A Mechanic
Over 10,000 questions answered!

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: clutch fluid (oil) run out.

The empty clutch fluid reservoir means the clutch slave cylinder or master cylinder (or both) has failed. It happens due to wear and age. The repair is to replace both the clutch slave cylinder and clutch master cylinder and then...

Q: How do you use the top anchor point in the back?

Your Altima is equipped with several anchor points. They’re designed to work in conjunction with one another. The driver and passenger rear seats both have two anchor points located where the seat bottom and back meet, but there’s another anchor...

Q: What should I know about the keys?

Like many other vehicles on the road today, your car keys are more than just “keys.” They combine a mechanical key with a remote, as well as computer functionality. Your Fusion should be equipped with two keys, both of which...

Related articles

P0240 OBD-II Trouble Code: Turbocharger Boost Sensor B Circuit Range/Performance
P0240 code definition Turbocharger Boost Sensor B Circuit Range/Performance What the P0240 code means P0240 is an OBD-II generic code triggered when the Engine Control Module (ECM) detects the intake boost...
P2428 OBD-II Trouble Code: Exhaust Gas Temperature Too High Bank 1
P2428 code definition A P2428 trouble code signifies that the PCM has detected a problem in the exhaust gas temperature sensor circuit in bank 1, which subsequently contains the number one...
P2103 OBD-II Trouble Code: Throttle Actuator Control Motor Circuit High
P2103 means there is a fault with the throttle actuator control motor circuit, likely due to a defective electrical component or part.