Q: How do I fold the front passenger seat?

The Traction Control Off message comes on the driver information center (DIC) when the traction control system (TCS) has been turned off. When the TCS is turned on again, the DIC alert will disappear.

Hello, it sounds like the sending unit in the tank is bad. The only way to repair it is to replace the fuel pump assembly in the fuel tank. I would recommend having a technician come out and replace the...

With the speed limitation and the loud noise, I recommend not driving the vehicle until it has been diagnosed and repaired. It sounds like the vehicle is either in limp mode or a mechanical failure has stopped the vehicle from...

Whether or not this is serious would depend on the reason the check engine light is on. I would recommend having your vehicle's trouble codes scanned (https://www.yourmechanic.com/services/check-engine-light-is-on-inspection) with an OBD2 scanner by a certified mechanic. Once the codes have been...

From the description you have provided, this may be a combination of problems. The loss of power as you accelerate could be a fuel delivery concern, a low fuel pressure situation caused by a faulty fuel pump (https://www.yourmechanic.com/services/fuel-pump-replacement), a plugged...

Hi there. It sounds like either the key fob is not programmed correctly to the vehicle and the doors are not working properly or the key fob has a low charged battery. I recommend trying to reprogram your key fob...

Hello, thank you for writing in. Often when starters are installed they come with a shim. These shims need to be installed to help hold the starter at the proper angle. If the angle is off the gears may not...

Hi There, A jerking reaction is generally caused by a couple of potential things such as a vacuum leak, a failing fuel pump or most commonly a dirty or failing mass air flow sensor. The mass air flow sensor (https://www.yourmechanic.com/services/mass-airflow-sensor-replacement)...

The exhaust and intake manifolds have no connection. Therefore, leaks in one do not affect the other. The only "indirect" issue that might coincidentally implicate both manifolds is if the cylinder head were so warped, or damaged, that leaks developed...