Skip the auto shop - Our mechanics make house calls

Q: Fuses getting no power.

asked by on

I have no power to some of my fuses.

A: Fuses are circuit protection devices. They ...

Fuses are circuit protection devices. They are designed to blow when the current passing through exceeds the fuse amperage rating. Not all fuses will have power all the time; some will only have power with the ignition on. So, you may want to double check that the key was in the ignition on position during your testing procedure. If by "no power to some of my fuses" you mean that some of your fuses are blown, why they have blown will need to be determined. As was mentioned, fuses don’t blow for no reason - they blow from too much current passing through the system. A certified technician, such as one from YourMechanic, will be able to diagnose and repair your fuse problem.

Was this answer helpful?
Recommended services
Get a Quote

Need advice from certified mechanic? Get help now!

Over 1000 mechanics are ready to answer your question.
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details

Ask a Mechanic
(100% Free)

Have a car question? Get free advice from our top-rated mechanics.

Ask A Mechanic
Over 10,000 questions answered!

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: Right front tire wears out quickly 19956 Chevy Yukon

Hello - you don't say how the tire is wearing out. Underinflation of the tire will produce rapid tire wear, and is indicated by similar wear of both the inner and outer edges of the tire surface. This will occur...

Q: Oil leaking into spark plug valve.

Hi, this comes up often on this car. The spark pug tubes go through the valve covers on this engine due to the placement of the spark plugs. The seals that go on the valve cover to seal the tubes...

Q: Ac clutch blowing fuse

The AC would have to be diagnosed to see if the clutch or compressor is blowing the fuses. You could try disconnecting the compressor to see if the AC is still blowing fuses. If it does, then further diagnostics would...

Related articles

How to Avoid Back Pain in a Car
If you have back problems, sitting in a car for an extended period of time can be excruciating. Even without back problems, you could experience discomfort and soreness from...
P2428 OBD-II Trouble Code: Exhaust Gas Temperature Too High Bank 1
P2428 code definition A P2428 trouble code signifies that the PCM has detected a problem in the exhaust gas temperature sensor circuit in bank 1, which subsequently contains the number one...
P2103 OBD-II Trouble Code: Throttle Actuator Control Motor Circuit High
P2103 means there is a fault with the throttle actuator control motor circuit, likely due to a defective electrical component or part.