Suzuki Reno Mass Airflow Sensor Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(16)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(16)

Mass Airflow Sensor Replacement Service

How much does a Mass Airflow Sensor Replacement cost?

On average, the cost for a Suzuki Reno Mass Airflow Sensor Replacement is $351 with $256 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2005 Suzuki RenoL4-2.0LService typeMass Airflow Sensor ReplacementEstimate$627.37Shop/Dealer Price$765.47 - $1157.25
2006 Suzuki RenoL4-2.0LService typeMass Airflow Sensor ReplacementEstimate$607.37Shop/Dealer Price$745.48 - $1137.28
2008 Suzuki RenoL4-2.0LService typeMass Airflow Sensor ReplacementEstimate$607.37Shop/Dealer Price$745.48 - $1137.28
2007 Suzuki RenoL4-2.0LService typeMass Airflow Sensor ReplacementEstimate$607.37Shop/Dealer Price$745.46 - $1137.24
Show example Suzuki Reno Mass Airflow Sensor Replacement prices

What is the Mass Airflow Sensor all about?

The mass airflow sensor is a round tunnel made of plastic with a sensor attached inside. All cars take air from the outside and pass it into the engine through the air filter. The mass airflow sensor measures the amount of air entering the engine. For an engine to perform properly, it needs a specific amount of air-fuel mixture. The computer in the car reads the amount of air coming into the engine from the mass airflow sensor and then calculates the correct amount of fuel needed for proper engine performance. If the sensor goes bad, the engine will not know the right amount of fuel to add, causing problems including poor gas mileage, lack of power and more.

It is common for the mass airflow sensor to get dirty (if the air filter is dirty) and lose the ability to read the amount of air coming in the engine. If the vacuum hoses are leaking, it will give the same error code as mass airflow sensor failure.

When doing this job, the mechanic may recommend changing the electrical connector that connects the mass airflow sensor to the car's computer system. It is possible for the wires in the connector to break, causing the mass airflow sensor to not work.

Keep in mind:

  • Routinely changing your air filter can improve the lifespan of your mass airflow sensor
  • Often mass airflow sensors stop working because of bad connectors or wiring harnesses.
  • Anytime the mass airflow sensor is replaced, the air duct between the sensor and the intake manifold should be inspected.

How it's done:

  • Scan the computer in the car for codes.
  • Verify the problem.
  • Remove and replace the sensor if found faulty.
  • Check vacuum hoses for leaks and cracks.
  • Test drive the vehicle.

Our recommendation:

  • Changing the air filter on a regular basis will ensure that the car is getting cleaner air and hence performing optimally.
  • If the Check Engine light is on, get the car inspected as soon as you can.
  • If the Check Engine light is flashing, pull over and get the car towed to avoid costly repairs.
  • A mechanic should always inspect the vacuum hoses and snorkel attached to the mass airflow sensor when replacing it. It is possible for these items to have leaks. Replacing the sensor without fixing the leaks will not solve the problem.

What common symptoms indicate you may need to replace the Mass Airflow Sensor?

  • Check Engine light is on.
  • Car does not have power.
  • Excessive fuel consumption.
  • Car may not start.

How important is this service?

In order to run optimally, your vehicle needs to have a perfect fuel-to-air ratio. As the vehicle is moving, an uncontrollable amount of air enters the throttle body and heads into the intake manifold. As such, the fuel has to be adjusted to be optimal for the amount of air. The mass airflow sensor measures the mass of the air that is entering the vehicle, and sends the information to the car’s computer management system. This system then controls the amount of fuel that is injected into the cylinders, so that the ideal fuel-to-air ratio is achieved. When the mass airflow sensor stops working, the computer cannot receive information on the air intake, and the fuel-to-air ratio will be wrong. This will cause your engine to run poorly, and sometimes not at all. It will also impact your gas mileage.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Suzuki mechanics

Real customer reviews from Suzuki owners like you.

Excellent Rating

(16)

Rating Summary
16
0
0
0
0
16
0
0
0
0

Joel

21 years of experience
987 reviews
Joel
21 years of experience
Suzuki Reno L4-2.0L - Car starts and then dies - Jacksonville, Florida
First guy in a long time where i honestly felt like I could trust his professional recommendation. Thanks Joel

Breck

20 years of experience
681 reviews
Breck
20 years of experience
Suzuki Reno L4-2.0L - Car is not starting - Houston, Texas
Quick And Very Efficient 10/10

Theodore

16 years of experience
1592 reviews
Theodore
16 years of experience
Suzuki Reno L4-2.0L - Brake Pads Replacement (Rear) - Snohomish, Washington
Theodore Tyson Lau did a good job.

Breck

20 years of experience
681 reviews
Breck
20 years of experience
Suzuki Reno L4-2.0L - Fuel Injector - Houston, Texas
Very professional

Excellent Rating

(16)

Rating Summary
16
0
0
0
0
16
0
0
0
0
Number of Suzuki Reno services completed
176+
services done by our mechanics
TOTAL NUMBER OF EXPERT Suzuki MECHANICS
300+
experts on our platform

Recent articles & questions

Symptoms of a Bad or Failing Mass Airflow Sensor
Common signs of problems with a mass airflow sensor include running rich at idle or lean under load, decrease in fuel efficiency, and rough idles.
How Long Does an Anti-Lock Brake (ABS) Fluid Level Sensor Last?
Your Your ABS system works both by means of electricity and hydraulic pressure. Fluid levels need to be monitored at all times, and that is the job of the ABS fluid level sensor. Located in the master cylinder, the ABS...
How to Replace an Air Cleaner Temperature Sensor
The air cleaner temperature sensor allows the computer to adjust engine timing and air/fuel ratio. A rough idle or "engine lag" are signs of failure.

Check Engine light stays on

Hello. Without knowing the code and the problem that is occurring then it will be hard for me to give you good information. From what has been replaced though, I am assuming that this is an issue with the cooling...

Airbag light indicates passenger sensor problem

The sensor for a passenger sitting in this seat is a common failure item yes. The unit is pretty expensive and the fabric of the seat cushion must be removed to access and replace this component unless a new and...

My car's gas pedal goes out and the car won't drive anymore if my RPM reaches the number 3 on the gauge.

Hello, I would start by extracting the problem codes from engine management and the transmission as well. You don't mention it, but surely the Check Engine light is on at this point. These codes will help determine a strategy for...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com