Ram 1500 Throttle/Accelerator Pedal Position Sensor Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(325)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(325)

Throttle/Accelerator Pedal Position Sensor Replacement Service

How much does a Throttle/Accelerator Pedal Position Sensor Replacement cost?

On average, the cost for a Ram 1500 Throttle/Accelerator Pedal Position Sensor Replacement is $395 with $300 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2014 Ram 1500V6-3.0L Turbo DieselService typeThrottle/Accelerator Pedal Position Sensor ReplacementEstimate$714.95Shop/Dealer Price$874.94 - $1332.41
Show example Ram 1500 Throttle/Accelerator Pedal Position Sensor Replacement prices

What is the Throttle/Accelerator Pedal Position Sensor all about?

On older vehicle designs, a simple throttle cable connects the accelerator pedal to the engine and controls the amount of fuel delivered to the engine. However, with fuel injected systems, that has changed. Newer engines now use electronics to control the amount of fuel sent to the engine based on accelerator pedal movement. This is the job of the accelerator pedal position sensor. It’s mounted to the gas pedal, and essentially translates the movement of the pedal (speed and position) into voltage, which tells the car’s computer how much fuel to supply for engine acceleration.

Keep in mind:

  • It’s impossible to check the operation of the accelerator pedal position sensor visually as it requires a voltmeter and an understanding of the proper voltage output range.
  • It’s possible for an accelerator pedal position sensor to operate intermittently.
  • A discrepancy in voltage will put the computer into “limp” mode, which provides significantly reduced power to prevent damage.

How it's done:

  • The throttle pedal position sensor is verified that it needs to be replaced. The throttle trim cover is then removed to access the sensor .
  • The defective throttle pedal position sensor is disconnected and removed.

  • The new throttle pedal position sensor is installed onto the firewall and reconnected.

  • The engine is started and the throttle pedal position sensor is tested for operation. The trim panel is then reinstalled.

  • The vehicle is road tested to ensure proper operation of the throttle pedal position sensor.

Our recommendation:

There is no set service or replacement period for your accelerator pedal position sensor. If you suspect a problem with your accelerator pedal position sensor, have one of our expert mechanics diagnose the system.

What common symptoms indicate you may need to replace the Throttle/Accelerator Pedal Position Sensor?

  • Lagging or intermittent acceleration
  • No acceleration
  • Limited power (limp mode)
  • No throttle response in Park or Neutral

How important is this service?

Because the accelerator pedal position sensor tells the car’s computer how quickly you’re depressing the accelerator pedal and controls the supply of fuel to the engine, replacement is very important. While your car will continue to operate even if there is a problem with the sensor, it will do so with limited capacity. Our experienced mechanics will use a voltmeter to determine sensor operation and diagnose the problem accurately. Have a faulty accelerator pedal position sensor replaced immediately.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Ram mechanics

Real customer reviews from Ram owners like you.

Excellent Rating

(325)

Rating Summary
310
10
1
0
4
310
10
1
0
4

Luke

17 years of experience
175 reviews
Luke
17 years of experience
Ram 1500 V8-5.7L - Drive Belt Tensioner - Sandy, Texas
Fast, Easy, and Professional. Scheduled Luke again for maintenance and brake pads. Book him up, one of the best!

Toby

10 years of experience
100 reviews
Toby
10 years of experience
Ram 1500 V8-5.7L - Oil Change - Irving, Texas
Toby was very professional and told me everything he needed to do to on my truck. Good

David

16 years of experience
636 reviews
David
16 years of experience
Ram 1500 V6-3.6L - Oil Filter Housing Gasket - Concord, California
Good person and very pleasant nice job

Patrick

15 years of experience
406 reviews
Patrick
15 years of experience
Ram 1500 V8-5.7L - Oil Change - Midlothian, Virginia
Very nice young man. Very flexible in rescheduling due to rain and other unforeseen roadblocks. Will use this service again for sure.

Excellent Rating

(325)

Rating Summary
310
10
1
0
4
310
10
1
0
4
Number of Ram 1500 services completed
3575+
services done by our mechanics
TOTAL NUMBER OF EXPERT Ram MECHANICS
300+
experts on our platform

Recent articles & questions

Symptoms of a Bad or Failing Throttle/Accelerator Pedal Position Sensor
Common signs of a faulty pedal position sensor include inconsistent engine response, reduced fuel efficiency, and the Check Engine Light coming on.
What Does the Rain and Light Sensor Warning Light Mean?
The rain and light sensor warning light indicates when there is an issue with the sensor system. It will remain deactivated until fixed.
How to Replace a Fuel Rail Sensor
The fuel system has a fuel rail sensor which fails when the engine operates erratically, has difficulty starting, or the Check Engine Light comes on.

My car shuts off while I'm driving sometimes and makes a bubbling noise once the car is warmed up or if I'm driving

Your coolant overflow reservoir usually bubbles when the engine has a restriction that causes the flow of coolant to be reduced. This can lead to or be a cause of the engine to overheat (https://www.yourmechanic.com/services/car-is-overheating-inspection). I would recommend getting a...

Both the AdvTrac and ABS Lights are on; how do I disengage them?

Hi, and thanks for contacting YourMechanic. First, try checking the ABS sensors (https://www.yourmechanic.com/services/abs-speed-sensor-replacement) for a proper connection. You may need to remove the sensors and clean them off. If there was any moisture on the sensors while the vehicle sat,...

Seal a gap between crankshaft position sensor and rubber?

You do not need to worry about water getting into the clutch area. You can add silicone around the sensor if you want to add it to the gap between the rubber and the sensor, but there is no need....

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com