Mitsubishi Mirage G4 Electronic Control Relay Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(13)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(13)

Electronic Control Relay Replacement Service

How much does a Electronic Control Relay Replacement cost?

On average, the cost for a Mitsubishi Mirage G4 Electronic Control Relay Replacement is $141 with $46 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2018 Mitsubishi Mirage G4L3-1.2LService typeElectronic Control Relay ReplacementEstimate$207.35Shop/Dealer Price$240.44 - $317.21
2017 Mitsubishi Mirage G4L3-1.2LService typeElectronic Control Relay ReplacementEstimate$187.35Shop/Dealer Price$220.46 - $297.24
2019 Mitsubishi Mirage G4L3-1.2LService typeElectronic Control Relay ReplacementEstimate$187.35Shop/Dealer Price$220.46 - $297.24
Show example Mitsubishi Mirage G4 Electronic Control Relay Replacement prices

What is the Electronic Control Relay all about?

A wide range of electronic systems must work properly in order for the vehicle to operate. That means there is a need for several different controllers to ensure proper operation. One of the most important is the electronic control relay. You might be more familiar with the term “main relay” because of its role in vehicle performance.

The electronic control relay operates the fuel pump and sends power to the engine’s injectors. Without the main relay, fuel will not flow from the tank to the engine, and your injectors will not atomize gasoline into the combustion chamber. In short, your car wouldn’t run. Electronic control relays are subject to failure from a number of different problems, including outright failure, heat damage, cracked solder and more.

Keep in mind:

  • The electronic control relay may not operate, or may operate intermittently depending on the source of the trouble.
  • A number of other problems can masquerade as a main relay failure, so it’s vital that you have one of our expert mechanics diagnose the issue.

How it's done:

  • The electronic control relay is located and accessed then verified it needs replaced
  • The defective relay is removed from the vehicle
  • The new electronic relay is installed
  • The components that the electronic relay operates are checked for proper operation
  • The vehicle is road tested for proper operation

Our recommendation:

Traditional turnkey ignition the relay will click three times during the starting process. If you listen closely, you should hear a single click when you turn the ignition to “on”. You should hear another when the Check Engine light turns off. Finally, there should be a third click when you turn the key to the “start” position. If you do not hear a click at any of these three points, there may be a problem with the electronic control relay. Have one of our expert mechanics diagnose and replace the relay if required.

What common symptoms indicate you may need to replace the Electronic Control Relay?

  • Engine doesn’t start, especially in cold weather
  • Engine may not start a few minutes after turning it off
  • No sound from the fuel pump when the ignition key is turned to “On”

How important is this service?

Given the fact that the electronic control relay powers the fuel pump and your fuel injectors, it is essential to replace a faulty one. However, many other problems can present similar symptoms, so it’s very important to have the issue diagnosed by one of our expert mechanics.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mitsubishi mechanics

Real customer reviews from Mitsubishi owners like you.

Excellent Rating

(13)

Rating Summary
13
0
0
0
0
13
0
0
0
0

Stephen

32 years of experience
181 reviews
Stephen
32 years of experience
Mitsubishi Mirage G4 L3-1.2L - Battery - Denver, Colorado
Very personable. Efficient. Punctual. It was a pleasure.

Gustavo

17 years of experience
425 reviews
Gustavo
17 years of experience
Mitsubishi Mirage G4 L3-1.2L - Car is shaking or vibrating - San Antonio, Texas
Highly recommend Gustavo!

Michael

36 years of experience
74 reviews
Michael
36 years of experience
Mitsubishi Mirage G4 L3-1.2L - Serpentine/Drive Belt - San Antonio, Texas
He’s just simply amazing, honest, and fix exactly what needs to be fixed!!!

Yoel

9 years of experience
212 reviews
Yoel
9 years of experience
Mitsubishi Mirage G4 L3-1.2L - Oil Change - Philadelphia, Pennsylvania
Great job!! would definitely book again

Excellent Rating

(13)

Rating Summary
13
0
0
0
0
13
0
0
0
0
Number of Mitsubishi Mirage G4 services completed
143+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mitsubishi MECHANICS
700+
experts on our platform

Recent articles & questions

Child Seat Safety Laws in All States
Child seat safety laws are in place to keep children safe while riding in a car. Different seats are available according to their height and weight.
How to Replace a Throttle Return Spring
Replacing a failing throttle return spring is essential to keep driving safely. It requires needle nose pliers and some hand work.
3 Reasons Your Car Smells like Rotten Eggs
A sulfuric or rotten eggs smell indicates an excess of byproducts left over from failed combustion. Removing the smell requires part replacement.

Added refrigerant, but no cold air

There are many causes for the AC not to be effective: Low refrigerant is common, but not always the source. The compressor has to turn on and provide the proper circulation. The expansion valve has to create the right amount...

How do I install my new blower motor 2006 Nissan Sentra? The new part came with just wires, how do I install a connector?

You must be using an aftermarket blower motor. You will need to cut off the old connector and using wire splices you will need to connect the wires to your connector. Before making final connection you will need to install...

96 F150 cranks, but wont start. Lack of fuel has been confirmed, but i still need to diagnose the correct part. How do i do that?

If you have confirmed that no power is reaching the pump once the car is running, such a fault can only be diagnosed by tracing the supply circuit (might have to be done, too, while "independently" powering the pump to...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com