Isuzu Amigo Wheel Bearings Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(13)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(13)

Wheel Bearings Replacement Service

How much does a Wheel Bearings Replacement cost?

On average, the cost for a Isuzu Amigo Wheel Bearings Replacement is $182 with $42 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1992 Isuzu AmigoL4-2.6LService typeWheel Bearings - Driver Side Rear ReplacementEstimate$481.58Shop/Dealer Price$566.83 - $814.46
1993 Isuzu AmigoL4-2.3LService typeWheel Bearings - Driver Side Rear ReplacementEstimate$230.95Shop/Dealer Price$254.02 - $319.12
1993 Isuzu AmigoL4-2.6LService typeWheel Bearings - Passenger Side Rear ReplacementEstimate$472.57Shop/Dealer Price$556.07 - $802.40
1998 Isuzu AmigoL4-2.2LService typeWheel Bearings - Driver Side Front ReplacementEstimate$232.35Shop/Dealer Price$255.80 - $321.96
1991 Isuzu AmigoL4-2.3LService typeWheel Bearings - Driver Side Rear ReplacementEstimate$230.95Shop/Dealer Price$255.52 - $321.74
1999 Isuzu AmigoL4-2.2LService typeWheel Bearings - Passenger Side Front ReplacementEstimate$232.35Shop/Dealer Price$255.94 - $322.21
1998 Isuzu AmigoV6-3.2LService typeWheel Bearings - Driver Side Front ReplacementEstimate$232.35Shop/Dealer Price$255.81 - $321.99
1990 Isuzu AmigoL4-2.6LService typeWheel Bearings - Driver Side Rear ReplacementEstimate$472.57Shop/Dealer Price$556.07 - $802.40
Show example Isuzu Amigo Wheel Bearings Replacement prices

What are wheel bearings and how do they work?

A wheel bearing assembly consists of rolling elements, such as hardened steel ball bearings or roller bearings, that roll on and around hardened steel bearing races. The wheel bearings support the front and rear axle, and all the weight of your car. Wheel bearings are made with a high-precision technique using extremely hard steel in order to withstand all the normal impacts that occur to the wheel and tire assembly as you drive along the road.

When to replace wheel bearings?

  • Growling or grinding noise from a wheel. Failed or failing wheel bearings make a very characteristic growling noise which will grow louder as the bearing wear progresses. If you believe the wheel bearing noise is coming from one side of the car, you can self-diagnosis your wheel bearing as you drive the car by loading and unloading vehicle weight You can do this by “swerving” from side-to-side. For example, if the noise markedly increases when you swerve to left, which shifts the vehicle’s weight to the right, then it often indicates the wheel bearing on the right is failing.

  • Axial or radial play in the wheel or wheel hub. Should the wheel hub move up and down or in and out, the bearing may be worn.

  • Vibration in the steering wheel or vehicle body and/or wandering. Vibration and lack of directional stability could be consequences of loose or worn out wheel bearings.

  • Tire and wheel assembly does not turn smoothly. With the wheel jacked up, and the car not in gear, the wheel should rotate smoothly. Rough or inconsistent movement, which is often accompanied by noise, can signify damaged bearings. Be sure the brakes are not dragging as you perform this check.

How do mechanics replace wheel bearings?

The complexity of wheel bearing replacement varies greatly depending on the vehicle make, model, year, the wheel position (front versus rear), and the drive type (AWD versus FWD):

  • On vehicles with unitized wheel bearing/hub assemblies, the brake rotor and caliper are removed.
  • The large axle nut is removed, the axle is pushed back through the center of the unitized hub assembly, and three (or more) bolts holding the hub assembly to the steering knuckle are removed.
  • The hub assembly is then removed from the knuckle. On installation of the new hub assembly to the knuckle, the bolts are torqued to the factory specification. In many cases, it is required to discard the old axle nut and replace with a new one. Special attention must be given to tightening the axle nut to the exact factory specification because over or under-tightening can damage the newly installed bearing. All YourMechanic professionals use calibrated torque wrenches on these critical fasteners.
  • Finally, the brake rotor and brake caliper are re-attached, the wheel installed and the car is road tested.
  • On vehicles where the wheel bearing is pressed into a cavity within the steering knuckle, the steering knuckle must be removed from the vehicle in order to press out the old bearing and press in the new bearing.
  • On some vehicles, the wheel bearing is pressed onto an axle shaft and thus the axle must be extracted from the axle carrier. This will apply to certain trucks.

Is it safe to drive with a wheel bearing problem?

No. Wheel bearing failure is usually gradual, although in some cases it starts immediately after the dramatic impact of the wheel and tire assembly with a deep pothole. Wheel bearings can sometimes make noise for quite some time before you experience a catastrophic failure that would result in complete separation of the wheel and tire assembly from the axle. Generally, the risk of sudden failure increases with the noise level. But strictly speaking, once the bearing has started to fail it is impossible to predict exactly when it will fail completely. So it should not continue to be driven. Were a failing bearing to seize or break while you are moving, you could experience loss of control of the vehicle. Once you receive a conclusive diagnostic that a wheel bearing has failed, replace the bearing promptly.

When replacing wheel bearings, keep in mind:

  • If the car has a substantial number of miles on the failed bearing (100,000 miles or more), it is a good idea to replace both bearings (driver and passenger) on the axle at the same time.
  • Wheel bearing noise can be confused with tire noise from defective tires. In difficult cases, a mechanic will apply remote wireless microphones at all 4 wheel positions, and then drive the car while listening to a remote receiver, switching between wheel positions to pinpoint the location of the failed bearing.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Isuzu mechanics

Real customer reviews from Isuzu owners like you.

Excellent Rating

(13)

Rating Summary
13
0
0
0
0
13
0
0
0
0

Keith

17 years of experience
1 reviews
Keith
17 years of experience
Isuzu Amigo V6-3.2L - Car is not starting - Sacramento, California
Explains everything very clearly. Knowledgeable and efficient. Gave honest opinion and recommendation for my current position.

Abli

11 years of experience
12 reviews
Abli
11 years of experience
Isuzu Amigo V6-3.2L - Serpentine/Drive Belt - Boxford, Massachusetts
He arrived early, changed a broken serpentine belt quickly, & identified the frozen ideler pulley that caused the problem. All in my driveway, I highly recommend!

Jeffrey

28 years of experience
870 reviews
Jeffrey
28 years of experience
Isuzu Amigo L4-2.2L - Car is not starting - Catawba, South Carolina
Jeffrey did a great job for us!

Harish

28 years of experience
588 reviews
Harish
28 years of experience
Isuzu Amigo L4-2.2L - Pre-purchase Car Inspection - Charlotte, North Carolina
Super awesome dude, talked me through the pre purchase inspection and gave me tons of advice

Excellent Rating

(13)

Rating Summary
13
0
0
0
0
13
0
0
0
0
Number of Isuzu Amigo services completed
143+
services done by our mechanics
TOTAL NUMBER OF EXPERT Isuzu MECHANICS
200+
experts on our platform

Recent articles & questions

5 Commonly Overlooked Vehicle Maintenance Items
Brake fluid, auto transmission fluid, and coolant flushes, as well as cabin filter changes and valve adjustments, are all important services.
How to Make Your Car More Artful
In In the 1970s, in the middle years of the pop art movement, race car driver Hervé Poulain had an idea. Inspired by the unconventional artistry surrounding the 70s, he commissioned his friend, artist Alexander Calder to create art using...
How Long Does a Shift Interlock Solenoid Last?
Modern Modern transmissions are much more advanced than they were only a few decades ago, particularly automatic transmission. There are many new features and designs on the market, ranging from ‘slick’ shifting transmissions to manual shift paddles on the steering...

need to know how to change a coolant bypass solenoid and where it is located. Can't find anything on the internet about this.

Just search for "Ford Escape 2013 coolant by-pass solenoid". The coolant by-solenoid is generally located on top of the engine. After you make that search you'll get a good point of view. The repair involves removing coolant from the engine....

Jeep dies while driving

It could be an electrical issue and obviously could include components such as the ignition switch, body grounds (for ignition), and/or any of the relays, fuses and terminals on the primary side of the ignition circuit. You can use the...

2001 mitsubishi montero limited. Need to calibrate idle air valve.

Hello. In order to properly adjust idle speed on this vehicle you will need a scan tool. The vehicle will need to be put in relearn mode to do so. Over time the computer will adapt on its own if...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com