Audi 200 Mass Airflow Sensor Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(4)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(4)

Mass Airflow Sensor Replacement Service

How much does a Mass Airflow Sensor Replacement cost?

On average, the cost for a Audi 200 Mass Airflow Sensor Replacement is $449 with $345 for parts and $104 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1989 Audi 200L5-2.2L TurboService typeMass Airflow Sensor ReplacementEstimate$816.25Shop/Dealer Price$1007.94 - $1539.70
1990 Audi 200L5-2.2L TurboService typeMass Airflow Sensor ReplacementEstimate$3595.99Shop/Dealer Price$4488.15 - $7121.24
1991 Audi 200L5-2.2L TurboService typeMass Airflow Sensor ReplacementEstimate$3595.99Shop/Dealer Price$4488.15 - $7121.24
Show example Audi 200 Mass Airflow Sensor Replacement prices

What is the Mass Airflow Sensor all about?

The mass airflow sensor is a round tunnel made of plastic with a sensor attached inside. All cars take air from the outside and pass it into the engine through the air filter. The mass airflow sensor measures the amount of air entering the engine. For an engine to perform properly, it needs a specific amount of air-fuel mixture. The computer in the car reads the amount of air coming into the engine from the mass airflow sensor and then calculates the correct amount of fuel needed for proper engine performance. If the sensor goes bad, the engine will not know the right amount of fuel to add, causing problems including poor gas mileage, lack of power and more.

It is common for the mass airflow sensor to get dirty (if the air filter is dirty) and lose the ability to read the amount of air coming in the engine. If the vacuum hoses are leaking, it will give the same error code as mass airflow sensor failure.

When doing this job, the mechanic may recommend changing the electrical connector that connects the mass airflow sensor to the car's computer system. It is possible for the wires in the connector to break, causing the mass airflow sensor to not work.

Keep in mind:

  • Routinely changing your air filter can improve the lifespan of your mass airflow sensor
  • Often mass airflow sensors stop working because of bad connectors or wiring harnesses.
  • Anytime the mass airflow sensor is replaced, the air duct between the sensor and the intake manifold should be inspected.

How it's done:

  • Scan the computer in the car for codes.
  • Verify the problem.
  • Remove and replace the sensor if found faulty.
  • Check vacuum hoses for leaks and cracks.
  • Test drive the vehicle.

Our recommendation:

  • Changing the air filter on a regular basis will ensure that the car is getting cleaner air and hence performing optimally.
  • If the Check Engine light is on, get the car inspected as soon as you can.
  • If the Check Engine light is flashing, pull over and get the car towed to avoid costly repairs.
  • A mechanic should always inspect the vacuum hoses and snorkel attached to the mass airflow sensor when replacing it. It is possible for these items to have leaks. Replacing the sensor without fixing the leaks will not solve the problem.

What common symptoms indicate you may need to replace the Mass Airflow Sensor?

  • Check Engine light is on.
  • Car does not have power.
  • Excessive fuel consumption.
  • Car may not start.

How important is this service?

In order to run optimally, your vehicle needs to have a perfect fuel-to-air ratio. As the vehicle is moving, an uncontrollable amount of air enters the throttle body and heads into the intake manifold. As such, the fuel has to be adjusted to be optimal for the amount of air. The mass airflow sensor measures the mass of the air that is entering the vehicle, and sends the information to the car’s computer management system. This system then controls the amount of fuel that is injected into the cylinders, so that the ideal fuel-to-air ratio is achieved. When the mass airflow sensor stops working, the computer cannot receive information on the air intake, and the fuel-to-air ratio will be wrong. This will cause your engine to run poorly, and sometimes not at all. It will also impact your gas mileage.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Audi mechanics

Real customer reviews from Audi owners like you.

Excellent Rating

(4)

Rating Summary
3
1
0
0
0
3
1
0
0
0

Martin

42 years of experience
90 reviews
Martin
42 years of experience
Audi 200 L5-2.2L Turbo - Car is overheating - San Marcos, Texas
Thank you

Johnny

33 years of experience
289 reviews
Johnny
33 years of experience
Audi 200 L5-2.2L Turbo - Car is not starting - Sacramento, California
Diagnosed problem quickly and professionally.

H

26 years of experience
828 reviews
H
26 years of experience
Audi A6 Quattro V6-2.7L Turbo - Mass Airflow Sensor - Mountain View, California

Chet

41 years of experience
494 reviews
Chet
41 years of experience
Audi A4 Quattro L4-1.8L Turbo - Mass Airflow Sensor - Chula Vista, California
Thanks chet storch

Excellent Rating

(4)

Rating Summary
3
1
0
0
0
3
1
0
0
0
Number of Audi Mass Airflow Sensor Replacement services completed
44+
services done by our mechanics
TOTAL NUMBER OF EXPERT Audi MECHANICS
700+
experts on our platform

Recent articles & questions

How to Replace an AC Evaporator Sensor
The air conditioning pressure evaporator sensor monitors and adapts to the evaporator's temperature, preventing damage and keeping the AC working.
How to Replace a Washer Fluid Level Switch
The washer fluid level switch fails when the Windshield Fluid Warning Light stays illuminated or there are unusual noises coming from the washer pump.
How to Replace the Oil Temperature Sensor on Most Cars
Oil, as well as the oil temperature sensor, is crucial to the engine lubrication system. A bad sensor can lead to leaks and poor vehicle performance.

The code read P0341, how do I know if it's the chain or the cam sensor?

There is a technical service bulletin for the Acura TSX stating that the code may be caused from the timing chain getting stretched until the tensioner cannot keep it tight any longer. This is a result of not getting oil...

What sensor can cause delayed shift on a hard acceleration

Hey there. The transmission control module (TCM) helps regulate fuel efficiency and power while storing information about the transmission system in its memory. A faulty transmission control module may cause a delay in acceleration or erratic shifting of gears. The...

Knock sensor 2009 Pontiac G3

Hi there - the knock sensor (https://www.yourmechanic.com/article/is-it-safe-to-drive-with-a-faulty-knock-sensor) on this engine is under the intake manifold, just behind the power steering pump, and is best seen and accessed from underneath the car. For assistance with a replacement, have a knock sensor...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com