Audi 200 Camshaft Position Sensor Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(6)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(6)

Camshaft Position Sensor Replacement Service

How much does a Camshaft Position Sensor Replacement cost?

On average, the cost for a Audi 200 Camshaft Position Sensor Replacement is $266 with $171 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1989 Audi 200L5-2.2L TurboService typeCamshaft Position Sensor ReplacementEstimate$457.29Shop/Dealer Price$560.37 - $830.22
1990 Audi 200L5-2.2L TurboService typeCamshaft Position Sensor ReplacementEstimate$437.29Shop/Dealer Price$540.40 - $810.27
1991 Audi 200L5-2.2L TurboService typeCamshaft Position Sensor ReplacementEstimate$437.29Shop/Dealer Price$540.40 - $810.27
Show example Audi 200 Camshaft Position Sensor Replacement prices

What is the Camshaft Position Sensor all about?

The camshaft position sensor monitors the position of the camshaft and reports that data to the car’s onboard computer system. This computer system works with sensors and other devices to keep the engine running. With data from the camshaft position sensor (CPS), the fuel injectors know when to fire.

When the sensor malfunctions, the computer does not know when to fire the injectors and may not fire them at all. The faulty readouts may also throw off spark timing, which will affect the car’s fuel economy. This sensor is used in conjunction with the crankshaft position sensor to control ignition timing. It is common for heat and oil leaks to cause this sensor to fail, due to where the sensor is located.

Keep in mind:

  • Damage to the camshaft position sensor is often caused by oil leaks; if this is the case, you may need another part of your car replaced or repaired.
  • When the camshaft position sensor is replaced, the alignment of the timing belt should be monitored so that no fluids leak onto the position sensor mounting area.
  • Some camshaft position sensors will need to have their software updated when they are installed.
  • Timing belts, mass air flow sensors, and crankshaft position sensors can all trigger the trouble code for the camshaft position sensor.

How it's done:

  • Scan test computer for trouble codes.
  • Pinpoint tests as per flow charts.
  • Remove and replace Crankshaft Position Sensor.
  • Clear trouble codes.
  • Check for proper operation and test drive car.

Our recommendation:

The camshaft position sensor isn’t checked in most regular services, but your vehicle has warning signs for when the sensor begins to fail. Because it sends information to the camshaft, when the sensor begins to fail your engine will begin to have trouble. Your engine may have a hard time turning on, staying on, idling, or running smoothly. Your Check Engine warning light should illuminate as well.

What common symptoms indicate you may need to replace the Camshaft Position Sensor?

  • Car stalls or does not start.
  • Car struggles to accelerate (does not maintain speed).
  • Check Engine light is on.
  • Car misfires.
  • Car stumbles or sputters on startup.
  • Car runs poorly or runs rough.

How important is this service?

The camshaft position sensor provides valuable information about the camshaft position to the computer management system. The computer system uses the information from the position sensor to determine when to inject more fuel. Without the sensor’s information, the computer won’t inject fuel properly, and your vehicle will stall or sputter.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Audi mechanics

Real customer reviews from Audi owners like you.

Excellent Rating

(6)

Rating Summary
4
1
0
1
0
4
1
0
1
0

Johnny

33 years of experience
264 reviews
Johnny
33 years of experience
Audi 200 L5-2.2L Turbo - Car is not starting - Sacramento, California
Diagnosed problem quickly and professionally.

Martin

42 years of experience
90 reviews
Martin
42 years of experience
Audi 200 L5-2.2L Turbo - Car is overheating - San Marcos, Texas
Thank you

Attila

19 years of experience
906 reviews
Attila
19 years of experience
Audi Q5 V6-3.2L - Camshaft Position Sensor Replacement - Ridgewood, New Jersey
Perform an Excellent job.

Doug

34 years of experience
139 reviews
Doug
34 years of experience
Audi A6 V6-2.8L - Camshaft Position Sensor - San Bernardino, California
Very helpful in answering questions. Took care of problem within one hour. Very good work.

Excellent Rating

(6)

Rating Summary
4
1
0
1
0
4
1
0
1
0
Number of Audi Camshaft Position Sensor Replacement services completed
66+
services done by our mechanics
TOTAL NUMBER OF EXPERT Audi MECHANICS
700+
experts on our platform

Recent articles & questions

Symptoms of a Bad or Failing Throttle Position Sensor
Common signs include lacking power when accelerating, rough or slow idle, stalling, inability to shift up, and the Check Engine Light coming on.
Symptoms of a Bad or Failing Top Dead Center (TDC) Sensor
Common signs include the Check Engine Light coming on, car not starting, and engine misfiring or running rough.
How Long Does an Evaporator Temperature Sensor (Switch) Last?
If If you have air conditioning in your vehicle, which pretty much all modern vehicles have, then you have an evaporator temperature sensor (switch). This switch plays an important role in making sure the correct temperature is attained, and that...

Fans aren't spinning

If the fans were working before the radiator replacement, it's possible a temperature sensor and/or wire were left disconnected or damaged. The O2 sensor (https://www.yourmechanic.com/services/oxygen-sensor-replacement) should not be unplugged but may not be the cause of the fans not working....

Gas gauge malfunctioning and Service Engine Light on

Thank you for asking about your 2006 GMC Sierra 1500 HD. More than likely, the problem is the fuel sensor, which is built into the fuel sending unit. This assembly is mounted in the gas tank. This is a common...

Why car won't start help. Tried to help with obd.

Among the possible faults that you have listed, the crankshaft position sensor (CPS) is particularly noteworthy. If the CPS has indeed failed such is a very common cause of no starts. Consequently, your most efficient option would be to request...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com