Showing articles & questions for topic
Swift+

Related questions

Question
Gear problems when changing from 3rd to 2nd end up in 4th and 1st ends up in 3rd.
Hi there. Yes the selector is not working and needs replaced. The selector rod or spring could be damaged causing the shifter to be too wobbly or out of alignment making the shifter go into other gears. If you need...
Question
How to turn off AVC on 07 Suzuki swift
Hello. The automatic volume control can be turned off by navigating through the vehicle's menus. You also have the option to set it to low, so that the volume change is not as drastic. The system is designed to automatically...
Question
I have bought new battery for car but in morning time not starting. Car will start after pushing it.
Hi there. If you recently replaced your battery, but the vehicle won't start unless you "bump start", it's possible that your battery cables are damaged. Once the motor starts, power to all components is supplied by the alternator. I'd have...
Question
High pitched squeeling when you pull away and dim headlight
This may be a result of a failing alternator. As the alternator begins to fail, this may cause it to struggle to properly charge the battery resulting in a drain on the power available to the various accessories in the...
Question
Check engine light is off and when I turn on the key the car won't start. Just happened after changing the clutch kit.
Hi there. If the vehicle ran before you performed the job for the clutch exchange, then back track the work you had performed and look for anything that is not plugged in. Most likely, the crankshaft sensor was unplugged and...
Question
My steering has to move freely. What can be the issue? , 2008 Suzuki Swift
Hello - you don't mention a power interruption to the vehicle (such as changing the battery), but it sounds as though the battery may have been disconnected, and the steering angle sensor (part of the EPS system) needs to be...
Question
Passenger headlight duller and full beam does not work
Hi, thanks for writing in. When you went to replace the bulb, did you find any amount of corrosion or signs of burns on the connectors or bulb sockets? Try replacing all of the bulbs at the same time before...

Need a mechanic?

Our certified mobile mechanics make house calls in over 700 U.S. cities. Fast, free online quotes for your car repair.

Get a quote

Post a question and get free advice from our certified mechanics.


Ask a question