Suzuki Sidekick Distributor Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(6)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(6)

Distributor Replacement Service

How much does a Distributor Replacement cost?

On average, the cost for a Suzuki Sidekick Distributor Replacement is $431 with $277 for parts and $154 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1993 Suzuki SidekickL4-1.6LService typeDistributor ReplacementEstimate$723.96Shop/Dealer Price$866.29 - $1284.35
Show example Suzuki Sidekick Distributor Replacement prices

What is a distributor and how does it work?

The distributor is an electro-mechanical component installed in a car’s ignition system to provide, time, and “distribute” the spark that occurs at each spark plug in an engine’s combustion cylinders. The distributor contains a rotating shaft with a gear at the bottom that engages a gear on the engine’s camshaft. Atop the shaft is a plastic rotor that has electrical contacts molded in. As the plastic rotor turns, it completes a high voltage circuit to each electrical contact, one per engine cylinder, that is molded into a plastic distributor cap. That high voltage then flows along the spark plug wire to the spark plug, creating the spark that ignites the air-fuel mixture in an engine cylinder.

Distributors vary in design: some may have the ignition coil built in, some have vacuum advance mechanisms attached for engine timing, and really old distributors may even have mechanical points. Vintage cars, that is cars older than 25 years, will more commonly be equipped with a distributor. Most modern car designs have replaced the distributor with fully electronic systems controlled by engine sensors for more precise, and more powerful, ignition system operation.

When to consider replacing the distributor:

  • Worn or damaged integral parts. Worn shaft bushings can result in wobbling or eccentric rotation of the rotor, resulting in misfires, loss of power, rough idle and poor mileage. If the shear pin breaks that secures the distributor shaft drive gear, complete loss of ignition spark distribution is the result. A failed ignition module that is mounted to the distributor housing may also be more cost-performance efficient to replace the entire distributor.
  • Visible oil leaks. Distributors are attached to the engine and consequently, there are seals, both internal and external, that keep oil from leaking at the point of attachment. External O-rings are serviceable but if an internal oil leak occurs, due to a worn shaft, for example, it might necessitate rebuilding or replacing the distributor.

How do mechanics replace the distributor?

Distributors are bolted to the engine block or the cylinder head. The replacement procedure is as follows:

  • Once all diagnostic tests are complete and the distributor is confirmed to be faulty, disconnect the battery negative cable.
  • Set engine at top dead center on the compression stroke for cylinder no. 1. Mark location of distributor housing and shaft relative to the engine mounting surface.
  • Remove primary and secondary ignition system wiring connected to the distributor. Unbolt and remove the distributor. Temporarily cover the hole in the head or block so no foreign matter drops into the engine.
  • Install new distributor and new cap and rotor, with the rotor pointing to the cylinder no. 1 firing-order electrode of the distributor cap. Reconnect all wiring and reconnect battery negative cable.
  • Start engine and set basic engine ignition timing per original equipment manager specification. Then check timing advance for proper function. Road test vehicle.

Is it safe to drive with a distributor problem?

Yes. A faulty distributor will cause increased fuel consumption, increased emissions and poor engine operation but does not generally create a safety hazard.

When replacing a distributor keep in mind:

  • Many ignition system failures will mimic a distributor failure, including faulty spark plugs, faulty wiring, and a worn cap and rotor. Mechanics will always test the distributor directly to ensure it is not needlessly replaced.
  • If a distributor is removed for testing and then re-installed, be sure that new o-rings are installed. Re-using old o-rings often results in oil leaks.
  • If the distributor is replaced, and the spark plugs and spark plug wires have considerable mileage on them, the best results will be obtained by replacing those components at the same time the new distributor is installed.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Suzuki mechanics

Real customer reviews from Suzuki owners like you.

Excellent Rating

(6)

Rating Summary
6
0
0
0
0
6
0
0
0
0

Ramiro

22 years of experience
103 reviews
Ramiro
22 years of experience
Suzuki Sidekick L4-1.6L - Electric Problems - Seattle, Washington
Ramiro is very thorough and went through all the systems to make sure that he came up with the best solution. He then explained all of the solutions to me in detail in a way that I could understand.

Victor

36 years of experience
230 reviews
Victor
36 years of experience
Suzuki Sidekick L4-1.8L - Door does not lock or open - Los Lunas, New Mexico
I would gladly give your company 20 stars for the excellent service that I received from Victor. Is courtesy prompt is professionalism and expertise exceeded my expectations.As a widow and t senior citizen, I was greatly reassured by his calm demeanor and his kindness and desire to make sure that my car was safe for myself and all other citizens driving on the road with me.I would definitely recommend him to anyone who wishes to have a courteous professional and proficient mechanic to evaluate their car and fix whatever could be fixed.

Jose

17 years of experience
324 reviews
Jose
17 years of experience
Suzuki Sidekick L4-1.6L - Brake Light Switch - Hollywood, Florida
Watch it, the company charges you BEFORE the work is completed alleging they charge a "pre-authorization" when, in reality, they charge your account. Mr. DeLaCruz knows his job & can refer you to a specialist for electrical work.

Pardeep

22 years of experience
1277 reviews
Pardeep
22 years of experience
Suzuki Sidekick L4-1.8L - Car is not starting - San Jose, California
Quick, found what the problem was very easily thank you

Excellent Rating

(6)

Rating Summary
6
0
0
0
0
6
0
0
0
0
Number of Suzuki Sidekick services completed
66+
services done by our mechanics
TOTAL NUMBER OF EXPERT Suzuki MECHANICS
300+
experts on our platform

Recent articles & questions

P0779 OBD-II Trouble Code: Pressure Control Solenoid B Intermittent
P0779 means that the Pressure Control Solenoid B, is receiving intermittent voltage signals due to low or dirty fluid, faulty solenoid, or module.
Insurance Requirements for Car Registration in Indiana
In In order to drive a vehicle legally in the state of Indiana, you are required to renew your vehicle registration every year at the Bureau of Motor Vehicles. In order to do so, you must provide proof that you...
How Long Does a Ballast Resistor Last?
A A ballast resistor is a component in the ignition system of older vehicles. If you drive a classic, you are familiar with coils and points. You don’t have an onboard computer, and obviously you don’t have circuit boards that...

My engine light keeps coming on. We have replaced the air/fuel ratio sensor four times.

Hey there. As you may know, this may be caused by a few different things, one of which is a faulty sensor (which you have already replaced). This may also be caused by an intake air leak, leaking or dirty...

My 2002 mazda protege 5 is flashing the o/d light

Hi There, If your overdrive light is blinking (like a turn signal or hazard light), it is indicating that there is a problem with your car’s transmission. It could be the shift solenoid or possibly the speed or range sensors...

Can I use the product "Permatex 24125 Ceramic Extreme Brake Parts Lubricant" on semi-metallic brake pads? 2015 Mitsubishi Lancer

Hello. Yes, you can use this on the back side of the brake pads and on any other contact point in the brake pad bracket. This will assist in reducing noise.

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com