Ram Dakota Car shuts off when stepping on gas pedal Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(4)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(4)

Car shuts off when stepping on gas pedal Inspection Service

How much does a Car shuts off when stepping on gas pedal Inspection cost?

On average, the cost for a Ram Dakota Car shuts off when stepping on gas pedal Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2011 Ram DakotaV8-4.7LService typeCar shuts off when stepping on gas pedal InspectionEstimate$114.99Shop/Dealer Price$124.99 - $132.49
2011 Ram DakotaV6-3.7LService typeCar shuts off when stepping on gas pedal InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
Show example Ram Dakota Car shuts off when stepping on gas pedal Inspection prices

Rough idling, frequent stalling, and inconsistent acceleration are all signs that something is amiss with your car. There are a number of systems that can cause this problem. Everything from electrical to fuel delivery to vacuum system issues can all cause a rough-running, stalling vehicle.

Common reasons for this to happen:

Let’s have a look at some of the more common causes that would make your car stall or stumble when you attempt to accelerate.

  • Faulty ignition components: The ignition coil pulls power from the battery and delivers it to the spark plugs, which ignites the fuel and makes the engine run. The car will display a number of symptoms as the ignition system wears.

Misfiring is one of the first symptoms you will see as a symptom of incomplete combustion due to improperly firing ignition components. As the situation progresses you will have trouble starting the vehicle and your fuel economy will drop dramatically. A flashing “Check Engine” light may be associated with this issue.

Finally, as the ignition system reaches the end of its life, your car will misfire and start to stall. Expect the engine to sputter, cough, and jerk, especially at higher speeds. Irregular sparking will cause the car to stall and it may shut off completely when you bring the car to a stop.

  • Faulty fuel pump: The fuel pump moves fuel from the gas tank to the engine. If the fuel pump is malfunctioning, the engine will be getting less fuel than necessary, which will lead to performance issues, and ultimately cause the vehicle not to start.

One of the first signs of a failing fuel pump is hesitation under acceleration. As the problem progresses, the car will lose power when idling, and eventually it may shut down completely.

  • Bad fuel filter: A fuel filter strains the fuel before it reaches the engine, which protects the fuel injectors. They are essential to a well running engine and require regular replacement. If the fuel filter is not replaced at the recommended intervals, the performance and fuel economy of the engine may suffer dramatically.

A failing fuel filter may exhibit similar symptoms to a failing fuel pump. Power loss, especially on acceleration, may be the first sign. As flow continues to be impeded, the fuel filter may ultimately lead to a no-start condition, as fuel can no longer get to the engine.

  • Vacuum leaks: The engine of a car is basically a large air pump. Air is drawn into the cylinders and mixes with fuel that is compressed and ignited. The air is drawn in through a butterfly valve, which creates a vacuum. The vacuum is used to power a number of auxiliary devices.

The tiniest of leaks can cause engine performance problems. Expect a rough or too-fast idle speed. Misfiring or hesitation during acceleration is another common issue with vacuum leaks. As the leak gets worse, the car will begin to stall. A hissing sound and an illuminated “Check Engine” light will typically also be observed.

  • Bad electrical connections: Modern cars have an extensive electrical system, and a bad connection (or bad ground) can cause a number of issues. Dim or flickering lights can be a sign, as well as difficulty starting the car. The car will make a clicking noise, much like a dead battery or loose battery cable.

  • Dirty or defective idle control valve: The idle control valve controls the amount of air that goes into the engine, which allows the computer to maintain the proper engine speed.

When an idle control valve becomes contaminated or stuck, it may lead to an unsteady and rough idle. The car will stall if the valve is too clogged or when it finally fails. If, while holding the accelerator pedal down, a small amount of pressure keeps the car running at a stop, the idle control valve may require attention. In most late model cars, this problem will usually trigger the Check Engine light.

What to expect:

A top-rated mobile mechanic will come to your home or office to determine the source and cause of the stalling condition, and will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How important is this service?

All conditions that cause this type of stalling problem are fairly severe and require maintenance as soon as possible. None of them will get better without a repair and as they grow more severe your car may stop running altogether, which presents a safety issue for you and your passengers. If your car shuts down when you step on the gas pedal, runs rough, or stalls frequently, you should book an appointment for one of our mechanic to look at it immediately.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Ram mechanics

Real customer reviews from Ram owners like you.

Excellent Rating

(4)

Rating Summary
4
0
0
0
0
4
0
0
0
0

Michael

4 years of experience
235 reviews
Michael
4 years of experience
Ram Dakota V8-4.7L - Car is not starting - Greenfield, Indiana
Michael carefully checked out problem and determined the problem, gave me a quote and set up a appointment while he was here!

Adam

16 years of experience
64 reviews
Adam
16 years of experience
Ram Dakota V8-4.7L - Shock Absorber Replacement (Rear) - Irving, Texas
Adam is very skilled and reliable.

Michael

4 years of experience
235 reviews
Michael
4 years of experience
Ram Dakota V8-4.7L - Starter - Greenfield, Indiana
Fast, on time knew what to do and did it!

Steven

21 years of experience
200 reviews
Steven
21 years of experience
Ram Dakota V8-4.7L - Spark Plugs - Irving, Texas
He was great. A lot of knowledge and very productive!

Excellent Rating

(4)

Rating Summary
4
0
0
0
0
4
0
0
0
0
Number of Ram Dakota services completed
44+
services done by our mechanics
TOTAL NUMBER OF EXPERT Ram MECHANICS
300+
experts on our platform

Recent articles & questions

How Long Does a Ride Control Module Last?
Once Once upon a time, automotive suspensions were pretty primitive. They’ve evolved a lot since then, and there are several types in use today. Most cars use springs and shocks/struts, but some vehicles use an air suspension system. This type...
How to Set Up a Radar Detector in Your Car
A A radar detector can give you early warning when you’re about to enter an area where a police officer is using a radar gun. A radar detector can save you the expense of incurring a speeding ticket. When installing...
P2009 OBD-II Trouble Code: Intake Manifold Runner Control Circuit Low Bank 1
P2009 trouble code definition P2009 is a general OBD2 diagnostic trouble code indicating a fault within the intake manifold runner control circuit....

TPS connector voltage

Hi there. Assuming, you are testing the TPS (throttle position sensor) connector while disconnected, the described parameters could be considered normal. Some ECM (engine control module) signal voltages default to near 5vts, sensor open. If you are back-probing the connector...

How often should I change the rear differential fluid on a 2016 Acura RDX?

Hi there. The fluid should be changed about every 15,000 to 20,000 miles to remove all contanimates and metal from the gears as they wear. I recommend having your differential serviced and use the OEM specified lubrication to maximize the...

Why is it running hot? 1999 Mitsubishi Galant

Hello - it sounds like you may be experiencing a blown head gasket (https://www.yourmechanic.com/question/head-gasket-blown), or the radiator is clogged. Given that the radiator cooling fan is coming on, the thermostat, appears to be opening and the water pump is transferring...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com