Pontiac G3 Wave Brake Vacuum Pump Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(2,147)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(2,147)

Brake Vacuum Pump Replacement Service

How much does a Brake Vacuum Pump Replacement cost?

On average, the cost for a Pontiac G3 Wave Brake Vacuum Pump Replacement is $588 with $493 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2009 Pontiac G3 WaveL4-1.6LService typeBrake Vacuum Pump ReplacementEstimate$1100.91Shop/Dealer Price$1357.39 - $2104.33
Show example Pontiac G3 Wave Brake Vacuum Pump Replacement prices

What is the Brake Vacuum Pump all about?

The brake booster is a device that helps enhance the effects of the hydraulic braking system in cars as a supplement to the primary braking mechanism. Each time you push the brake pedal, the force transfers to a rod. This rod passes through the brake booster and reaches the master cylinder. The pressure from the rod activates the master cylinder piston and works on the hydraulic braking systems.

The brake booster chamber contains a vacuum the engine creates. This chamber has two sections, separated vertically by way of a rubber diaphragm. When the brake pedal pushes the rod, a small amount of air is let into the chamber on the brake pedal side through a valve that also seals off the vacuum. This air pressure on one side of the diaphragm helps enhance the force of the brake.

However, in case of cars that have turbo charging or use diesel as fuel, the engine does not create the necessary vacuum. Thus, they need an additional brake booster vacuum pump to draw out the air and create the vacuum needed for the brake booster to function. Vehicles that typically run in locations of high altitude also need a brake booster vacuum pump.

The brake booster vacuum pump reduces dependency on the engine for the vacuum and can work independently of it. This device uses an electrical control circuit to work. It activates with a signal from the brake booster vacuum sensor that monitors the levels of the vacuum in the brake booster.

Keep in mind:

  • The brake booster vacuum pump should be able to maintain up to 18” of vacuum for the brake booster to be effective.
  • If you notice that the pedal has slipped to the floor of the car and you hear a hissing sound, this could be an indication of a leak in the air line or pump to the brake booster vacuum pump.

How it's done:

  • The battery is disconnected. The faulty brake booster vacuum pump is located and identified. The vehicle is raised and supported on jack stands as needed. The engine under shield is removed for access.

  • The brake booster vacuum pump hoses and electrical connector are disconnected. The brake booster vacuum pump is removed from the mounting bracket.

  • The new brake booster vacuum pump is installed onto the mounting bracket. The hoses and electrical connector are installed to the new brake booster vacuum pump. The battery is reconnected.

  • The brakes are tested for proper brake booster vacuum pump operation. The engine shield is reinstalled. The vehicle is removed from the jack stands.

  • The vehicle is road tested and checked for proper brake booster vacuum pump and brakes operation.

Our recommendation:

If you notice the brakes are not responding as they should, book an appointment with one of our expert mechanics and have the brake booster system completely inspected. The mechanic will check the brake booster vacuum pump for damage and advise you if it needs replacing. Refer to the owner’s manual for recommendations on the frequency in which you must have the brake booster vacuum pump replaced.

What common symptoms indicate you may need to replace the Brake Vacuum Pump?

  • Delayed brake response
  • Excessive pressure is needed to make the brake respond
  • A hissing sound when you press the brake pedal
  • Brake pedal slips to the floor of the car when the engine is running and the car is stationary
  • Braking becomes especially difficult in heavy traffic areas when the brakes need to be applied in quick succession

How important is this service?

A malfunctioning brake booster vacuum pump will not create the adequate vacuum needed for the brake boosters or power brakes to function. This undermines the effectiveness of your brakes and can be a safety hazard.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Pontiac mechanics

Real customer reviews from Pontiac owners like you.

Excellent Rating

(2,147)

Rating Summary
2,003
79
17
12
36
2,003
79
17
12
36

Jeffrey

27 years of experience
870 reviews
Jeffrey
27 years of experience
Pontiac GTO V8-6.6L - Brake Vacuum Pump - Charlotte, North Carolina
He was on time.Very knowledgeable,Did great work.

Jerimiah

19 years of experience
328 reviews
Jerimiah
19 years of experience
Pontiac Montana V6-3.4L - Drive Belt Tensioner - Las Vegas, Nevada
so far his been trustworthy and on time.

Dan

39 years of experience
1005 reviews
Dan
39 years of experience
Pontiac Grand Prix V6-3.8L - Car Air Pump Check Valve Replacement - Lawrenceville, Georgia
Dan is an excellent mechanic, arrived on time and immediately got to work. It was an absolute pleasure to have him work on my vehicle.

Richard

11 years of experience
265 reviews
Richard
11 years of experience
Pontiac Grand Prix V6-3.8L - Brake safety inspection - Nashville, Tennessee
Wonderful! Very friendly and accommodating. Quick too!

Excellent Rating

(2,147)

Rating Summary
2,003
79
17
12
36
2,003
79
17
12
36
Number of Pontiac services completed
23617+
services done by our mechanics
TOTAL NUMBER OF EXPERT Pontiac MECHANICS
800+
experts on our platform

Recent articles & questions

What Are the Risks of Switching to Synthetic Oil in Older Cars?
Older cars usually have to use conventional motor oil instead of synthetic motor oil. Switching to synthetic can cause engine leaks or engine damage.
Symptoms of a Bad or Failing Power Steering Control Unit
If a warning light comes on or you feel that is very difficult to move the steering wheel, the power steering control unit may need to be replaced.
5 Essential Items to Keep In Your Car
A first aid kit, jumper cables, a tool kit, a flashlight, and a spare fuel can are five of the most important things you should keep in your car.

Car jerks when shifting into reverse gear

I think you are correct - the transmission is in "limp" mode. Have a professional mechanic check for problem codes to indicate what the fault might be. This is an important "next step" because that problem may not be with...

Stalling,bad fuel mileage,won't start without Acceleration, rough idling.

This may be related to a couple of different things. I would recommend checking the idle air control valve/module (https://www.yourmechanic.com/services/idle-control-valve-replacement) which works similar to the MAF sensor (https://www.yourmechanic.com/services/mass-airflow-sensor-replacement) in that it regulates air intake as it is mixed with fuel...

Temperature gauge jumping

Hello. If possible, it would be good to verify coolant temperature (with a laser thermometer or similar), to confirm that your temperature sensor and gauge are reporting temperature correctly. If so, it's possible that you have a blown head gasket...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com