Oldsmobile LSS Water Pump Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(14)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(14)

Water Pump Replacement Service

How much does a Water Pump Replacement cost?

On average, the cost for a Oldsmobile LSS Water Pump Replacement is $550 with $130 for parts and $420 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1997 Oldsmobile LSSV6-3.8LService typeWater Pump ReplacementEstimate$725.60Shop/Dealer Price$801.55 - $1005.10
1996 Oldsmobile LSSV6-3.8L TurboService typeWater Pump ReplacementEstimate$859.16Shop/Dealer Price$931.83 - $1132.92
1998 Oldsmobile LSSV6-3.8LService typeWater Pump ReplacementEstimate$698.57Shop/Dealer Price$769.30 - $968.93
1998 Oldsmobile LSSV6-3.8L TurboService typeWater Pump ReplacementEstimate$859.16Shop/Dealer Price$931.93 - $1133.09
1997 Oldsmobile LSSV6-3.8L TurboService typeWater Pump ReplacementEstimate$859.16Shop/Dealer Price$937.97 - $1143.66
1996 Oldsmobile LSSV6-3.8LService typeWater Pump ReplacementEstimate$698.57Shop/Dealer Price$769.72 - $969.66
1999 Oldsmobile LSSV6-3.8LService typeWater Pump ReplacementEstimate$698.57Shop/Dealer Price$769.34 - $969.01
1999 Oldsmobile LSSV6-3.8L TurboService typeWater Pump ReplacementEstimate$859.16Shop/Dealer Price$931.93 - $1133.09
Show example Oldsmobile LSS Water Pump Replacement prices

What is a water pump and how does it work?

The water pump is a belt or chain-driven engine accessory bolted to the engine above the crankshaft pulley. The pump housing has an impeller that circulates engine coolant through the cooling system passageways in the engine block and cylinder head, on to the radiator, where the coolant temperature is reduced. . The lower temperature coolant then flows back to the water inlet on the engine and the water pump continues the cycle.

When to consider replacing the water pump:

  • Coolant leaks or overheating. The water pump impeller shaft is supported by a bearing. Eventually, the bearing or seal can wear and leak or damage the impeller. Many water pumps have weep holes near the pump bearing. If you see significant leakage from that weep hole, it is time to replace the pump.
  • Bearing roughness or noise. If the water pump shaft does not turn smoothly or the pump is noisy, the bearing is excessively worn. Pump replacement will be necessary.
  • Timing belt replacement. In engines where the water pump is driven by the timing belt, it is a good idea to replace the water pump at the same time the timing belt is replaced. The extensive work explains why it is always recommended to replace the water pump whenever the mechanic already has these components removed for regularly scheduled timing belt replacement.

How do mechanics replace the water pump?

  • The water pump is usually bolted to the front of the engine. The replacement procedure will vary depending on whether the pump is driven by the timing belt, the serpentine belt, or chain.
  • On a cold engine, the engine coolant is drained to a level below the water pump.
  • Components that require removing to access the water pump are removed, including the belt or chain that directly drive the pump.
  • The bolts holding the pump to the engine are removed and the pump is pulled out.
  • The gasket surface must be cleaned and the pump mounting surface inspected. A new gasket, rubber seal, or RTV sealant, as required, is installed and then the new pump. The bolts are torqued in sequence using a calibrated inch pound torque wrench.
  • For applications where the water pump is driven by the timing belt, the timing belt must be removed. Typically, this requires removal of the crankshaft pulley, timing belt covers, and timing belt tensioner. Once the new pump is installed, new coolant is added back while bleeding the cooling system of any air. The engine is then run and brought to normal operating temperature to check for leaks and ensure normal operating temperature.

Is it safe to drive with a water pump problem?

No. Should the water pump only leak a little bit, you can drive the car. However, a small leak could suddenly enlarge or the pump bearing might unexpectedly seize. Either circumstance would likely cause engine overheating. If a defective water pump causes the overheating, it is not safe to drive because of the damage to the engine.

When replacing the water pump keep in mind:

  • It is best to install a new cooling system thermostat when you install a new water pump, especially if the thermostat is old or original.
  • Completely flushing the cooling system is a good idea when you replace the water pump. Flushing can be done before or after pump replacement.
  • The rest of the cooling system should be inspected too — particularly rubber hoses, which have a limited lifetime.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Oldsmobile mechanics

Real customer reviews from Oldsmobile owners like you.

Excellent Rating

(14)

Rating Summary
13
1
0
0
0
13
1
0
0
0

Joshua

28 years of experience
709 reviews
Joshua
28 years of experience
Oldsmobile LSS V6-3.8L - Replace Rear shocks - Oakland, California
Josh is a good communicator not only about the job at hand but other potential problem with an eye toward avoiding uneccesary work and expense. I made an appointment for another job.

Patrick

12 years of experience
159 reviews
Patrick
12 years of experience
Oldsmobile LSS V6-3.8L - Car is not starting - Phoenix, Arizona

Michael

49 years of experience
124 reviews
Michael
49 years of experience
Oldsmobile LSS V6-3.8L - Serpentine/Drive Belt - Memphis, Tennessee
Nice guy, honest, and was right on time. Would highly recommend.Next time my car needs work, I'm asking for him.

Jonathan

36 years of experience
522 reviews
Jonathan
36 years of experience
Oldsmobile Cutlass Ciera V6-3.1L - Water Pump - Saint Petersburg, Florida
Very good I would recommend Jonathan and use him again for future work.

Excellent Rating

(14)

Rating Summary
13
1
0
0
0
13
1
0
0
0
Number of Oldsmobile Water Pump Replacement services completed
154+
services done by our mechanics
TOTAL NUMBER OF EXPERT Oldsmobile MECHANICS
300+
experts on our platform

Recent articles & questions

How to Prevent a Car from Dying
Cars Cars are complex mechanical and electrical parts of our daily lives. Many different systems can cause the vehicle to die, usually when it is most inconvenient. The most important part of preparing is having regular maintenance (https://www.yourmechanic.com/cars) performed. This...
How to Clean a Throttle Body
A throttle body needs cleaning when the engine idle is rough, the engine stumbles through acceleration, or the Check Engine Light comes on.
P2296 OBD-II Trouble Code: Fuel Press Regulator 2 Control Circuit High
P2296 P2296 code definition Fuel Press Regulator 2 Control Circuit High What the P2296 code means P2296 is an OBD-II code for the engine control module (ECM) detecting the number 2 fuel pressure regulator control circuit is high indicating a...

What should I know about loading cargo and luggage on the roof luggage carrier?

If your car is equipped with a roof luggage carrier, you’ll find that it offers a significant amount of additional cargo space than what’s available in the cargo compartment alone. Of course, there are several things that you need to...

car overheating and heater blowing cold air plus hose to heater core not getting hot

If you replaced all those parts and it still is overheating then you have a radiator that is clogged (https://www.yourmechanic.com/article/symptoms-of-a-bad-or-failing-radiator) and/or the fan is not working (https://www.yourmechanic.com/article/symptoms-of-a-bad-or-failing-cooling-radiator-fan-motor). You need to see if the upper and lower hose is hot when...

Hi, I have the 2009 Ford F-150 5.4L 3 valve V8 engine. It looks as if I’m going to need to buy a remanufactured engineThe mechanic I took it to said that the source of the noise was not the lifter or valve springThey discovered that the plastic pieces are gone, the timing chain is loose and the cam shaft has fresh metal showingThey recommended a timing chain, phasers, cam shaft, gaskets for $2,800They said they would put in a refurbished timing set by COILSI wasn’t so sure about that since a remanufactured engine costs around $3200I would like to know how many hours does it take to install an engine...do I need to buy an installation kit or other parts to make it workWhich is better...a remanufactured engine from powertrain products OR powersource?

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com