Nissan Versa Power Steering Pump Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(727)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(727)

Power Steering Pump Replacement Service

How much does a Power Steering Pump Replacement cost?

On average, the cost for a Nissan Versa Power Steering Pump Replacement is $515 with $333 for parts and $182 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2012 Nissan VersaL4-1.8LService typePower Steering Pump ReplacementEstimate$1172.54Shop/Dealer Price$1419.98 - $2151.77
2016 Nissan VersaL4-1.6LService typePower Steering Pump ReplacementEstimate$857.31Shop/Dealer Price$1026.57 - $1529.00
2008 Nissan VersaL4-1.8LService typePower Steering Pump ReplacementEstimate$1160.83Shop/Dealer Price$1406.00 - $2136.10
2015 Nissan VersaL4-1.6LService typePower Steering Pump ReplacementEstimate$1160.83Shop/Dealer Price$1406.00 - $2136.09
2009 Nissan VersaL4-1.8LService typePower Steering Pump ReplacementEstimate$1160.83Shop/Dealer Price$1407.92 - $2139.45
2010 Nissan VersaL4-1.8LService typePower Steering Pump ReplacementEstimate$1160.83Shop/Dealer Price$1406.18 - $2136.41
2010 Nissan VersaL4-1.6LService typePower Steering Pump ReplacementEstimate$1160.83Shop/Dealer Price$1406.02 - $2136.13
2017 Nissan VersaL4-1.6LService typePower Steering Pump ReplacementEstimate$855.23Shop/Dealer Price$1024.00 - $1524.89
Show example Nissan Versa Power Steering Pump Replacement prices

What is the power steering pump and how does it work?

The power steering pump is a belt-driven or electric-driven hydraulic pump that generates the hydraulic pressure needed to provide power steering assist. It develops output pressures of 1,000 PSI or more. The pump output is directed to the steering gear, often a rack and pinion type unit, where the hydraulic pressure pushes on the steering rack, greatly reducing the effort it would otherwise take to turn the steering wheel.

Power Steering

When to consider replacing the power steering pump:

  • Groaning or whining noise when turning. Noise can occur if there is wear on the pump bearings or impeller vanes. A low fluid level or trapped air can also cause noises. If the pump has already been operating while dry, adding fluid may not resolve the noise and replacement of the pump might be necessary.
  • Power steering fluid leaks. Leaks can develop at pump seals, threaded connections, hoses, or on the steering rack and pinion unit. Pump seal leaks will generally require a replacement.
  • Difficult steering. Should you notice it is harder to turn the steering wheel, it might mean the power steering pump output pressure is too low, or there could be blockages in the pump or lines.
  • Damage to the pump pulley. Should the pump pulley become damaged or is loose on the pump shaft, you might detect vibration, drive belt damage, or hard steering. Either the pulley will have to be serviced or the pump assembly replaced.

How do mechanics replace the power steering pump?

  • If driven by a drive belt, the power steering pump is bolted to the engine via a bracket that allows for adjustment of the pump drive belt. Once the engine is cold, and safe to work on, the drive belt is removed.
  • If driven by an electric pump, the pump may be mounted in conjunction with the steering shaft or in conjunction with the steering rack. With either a drive belt or electric pump, removal of any dash, panel, or steering components is performed to access the pump.
  • The threaded connectors to the pump inlet and outlet are loosened and removed.
  • Any mounting bolts and brackets are removed so the pump can be removed.
  • If the old pump has failed catastrophically, or there is reason to suspect contaminants in the power steering hoses, the system is flushed.
  • The new pump is bolted on, the pressure and return hoses attached and the system is bled of all air. If pump is belt-driven, it is tightened to the manufacturer’s specification.
  • Finally, the engine is run and the car is road tested to confirm normal steering effort. If a new drive belt was installed, belt tension is measured again, and adjusted as needed, after the belt has run for a few minutes.

Is it safe to drive with a power steering pump problem?

No. If the power steering pump is operated without an adequate amount of fluid, and the pump reservoir will not hold fluid due to a large leak. The pump could seize, which would snap the serpentine belt and likely leave you stranded. If the pump turns and there is adequate fluid, but there is no power assist, it will require much greater effort to turn the steering wheel, and that presents inherent safety risks. Generally, the wisest course is to seek immediate repairs if you suspect a problem with any component in your car’s power steering system.

When replacing the power steering pump keep in mind:

  • Any belts driving the pump should be inspected and replaced as needed. The pump will only produce the required hydraulic pressure if it is driven by the belt at an adequate speed.
  • Power steering leaks from aged rubber hoses, particularly where the rubber is crimped to the steel tube, are not unusual and should be carefully inspected. The system operates under high pressure. The fluid is flammable, and if leaking fluid happens to contact a hot engine part, a fire might result. You always want to be sure the hoses and connections are sound.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Nissan mechanics

Real customer reviews from Nissan owners like you.

Excellent Rating

(727)

Rating Summary
691
18
5
6
7
691
18
5
6
7

Matthew

34 years of experience
1438 reviews
Matthew
34 years of experience
Nissan Versa L4-1.8L - horn not working inspection - Norfolk, Virginia
Matthew is an great mechanic, he showed up on time and was very helpful as well as knowledgeable about my car. I’d definitely keep him as my mechanic and refer him to others!

Pete

17 years of experience
192 reviews
Pete
17 years of experience
Nissan Versa L4-1.6L - Adjust Drum Brakes - Chula Vista, California
Always on time, very efficient and honest.

Austin

6 years of experience
12 reviews
Austin
6 years of experience
Nissan Versa L4-1.6L - Starter - Seattle, Washington
Austin was very informative and helpful. He answered questions I had and explained why he was doing what he was doing.

Richard

12 years of experience
265 reviews
Richard
12 years of experience
Nissan Versa L4-1.8L - Catalytic Converter - Smyrna, Tennessee
Professional, knowledgeable and on time

Excellent Rating

(727)

Rating Summary
691
18
5
6
7
691
18
5
6
7
Number of Nissan Versa services completed
7997+
services done by our mechanics
TOTAL NUMBER OF EXPERT Nissan MECHANICS
1600+
experts on our platform

Recent articles & questions

Can You Switch Between Regular and Synthetic Motor Oil?
If you have ever wondered if you can switch between regular and synthetic motor oil, you need to consider what type of oil works best for your engine.
P0649 OBD-II Trouble Code: Speed Control Lamp Control Circuit
P0649 means the PCM has detected a problem with the speed control lamp circuit due to a faulty speed control lamp bulb or circuit, wiring issues.
A Buyer’s Guide to the 2012 Volvo S80
The The S80 doesn’t just bring subtle elegance and luxury features to the table, it also brings the long-renowned quality and safety ratings of its Swedish maker. While the brand may not rival the names of BMW and Audi, the...

How do I clean the rearview mirror?

The rearview mirror can be damaged easily, so glass cleaner should never be applied directly to it. Instead, you should wash the rearview mirror with a very soft towel that has been dampened with water.

run away idle/engine speed

This can be cause by a few things. A sticking throttle cable or throttle body (https://www.yourmechanic.com/services/clean-throttle-body), due to excess carbon buildup, or expansion from heating, idle air control valve issue, it can also be caused by a faulty temperature sensor...

my car doesnt recognize that the clutch is being pushed

Hi Matthew. Thanks for contacting us today. Typically when a car with a manual transmission will not start due to this problem, it is due to a failed clutch safety switch. If you'd like to request an estimate to have...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com