Mitsubishi Mirage G4 Water Pump Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

customer ratings

(11)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

customer ratings

(11)

Water Pump Replacement Estimate for Mitsubishi Mirage G4

Mitsubishi Mirage G4 Water Pump Replacement costs $436 on average.

CarServiceEstimateShop/Dealer Price
2018 Mitsubishi Mirage G4L3-1.2LService typeWater Pump ReplacementEstimate$731.60Shop/Dealer Price$893.09 - $1330.12
2017 Mitsubishi Mirage G4L3-1.2LService typeWater Pump ReplacementEstimate$697.60Shop/Dealer Price$859.12 - $1296.17
Show example Mitsubishi Mirage G4 Water Pump Replacement prices

Water Pump Replacement Service

What is a water pump and how does it work?

The water pump is a belt or chain-driven engine accessory bolted to the engine above the crankshaft pulley. The pump housing has an impeller that circulates engine coolant through the cooling system passageways in the engine block and cylinder head, on to the radiator, where the coolant temperature is reduced. . The lower temperature coolant then flows back to the water inlet on the engine and the water pump continues the cycle.

When to consider replacing the water pump:

  • Coolant leaks or overheating. The water pump impeller shaft is supported by a bearing. Eventually, the bearing or seal can wear and leak or damage the impeller. Many water pumps have weep holes near the pump bearing. If you see significant leakage from that weep hole, it is time to replace the pump.
  • Bearing roughness or noise. If the water pump shaft does not turn smoothly or the pump is noisy, the bearing is excessively worn. Pump replacement will be necessary.
  • Timing belt replacement. In engines where the water pump is driven by the timing belt, it is a good idea to replace the water pump at the same time the timing belt is replaced. The extensive work explains why it is always recommended to replace the water pump whenever the mechanic already has these components removed for regularly scheduled timing belt replacement.

How do mechanics replace the water pump?

  • The water pump is usually bolted to the front of the engine. The replacement procedure will vary depending on whether the pump is driven by the timing belt, the serpentine belt, or chain.
  • On a cold engine, the engine coolant is drained to a level below the water pump.
  • Components that require removing to access the water pump are removed, including the belt or chain that directly drive the pump.
  • The bolts holding the pump to the engine are removed and the pump is pulled out.
  • The gasket surface must be cleaned and the pump mounting surface inspected. A new gasket, rubber seal, or RTV sealant, as required, is installed and then the new pump. The bolts are torqued in sequence using a calibrated inch pound torque wrench.
  • For applications where the water pump is driven by the timing belt, the timing belt must be removed. Typically, this requires removal of the crankshaft pulley, timing belt covers, and timing belt tensioner. Once the new pump is installed, new coolant is added back while bleeding the cooling system of any air. The engine is then run and brought to normal operating temperature to check for leaks and ensure normal operating temperature.

Is it safe to drive with a water pump problem?

No. Should the water pump only leak a little bit, you can drive the car. However, a small leak could suddenly enlarge or the pump bearing might unexpectedly seize. Either circumstance would likely cause engine overheating. If a defective water pump causes the overheating, it is not safe to drive because of the damage to the engine.

When replacing the water pump keep in mind:

  • It is best to install a new cooling system thermostat when you install a new water pump, especially if the thermostat is old or original.
  • Completely flushing the cooling system is a good idea when you replace the water pump. Flushing can be done before or after pump replacement.
  • The rest of the cooling system should be inspected too — particularly rubber hoses, which have a limited lifetime.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mitsubishi mechanics

Real customer reviews from Mitsubishi owners like you.

Excellent Rating

(11)

Rating Summary
11
0
0
0
0
11
0
0
0
0

Benji

22 years of experience
259 reviews
Benji
22 years of experience
Mitsubishi Mirage G4 L3-1.2L - Oil Change - Chandler, Arizona
Very friendly and straight forward

Stephen

32 years of experience
162 reviews
Stephen
32 years of experience
Mitsubishi Mirage G4 L3-1.2L - Battery - Denver, Colorado
Very personable. Efficient. Punctual. It was a pleasure.

Deward

17 years of experience
31 reviews
Deward
17 years of experience
Mitsubishi Mirage G4 L3-1.2L - Brake Rotor/Disc Replacement (Front) - Greensboro, North Carolina
Very fast and friendly

Luis

4 years of experience
87 reviews
Luis
4 years of experience
Mitsubishi Mirage G4 L3-1.2L - Serpentine/Drive Belt - Richmond, Virginia
Great experience! The squeaking is gone and my car moving a lot smoother.

Excellent Rating

(11)

Rating Summary
11
0
0
0
0
11
0
0
0
0
Number of Mitsubishi Mirage G4 services completed
121+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mitsubishi MECHANICS
700+
experts on our platform

Recent articles & questions

How Much Does a Mechanic Make in Arizona?
Automotive technician jobs in Arizona have an average mechanic salary of $36k, with some mechanics earning a salary of $60k.
P2767 OBD-II Trouble Code: Input/Turbine Speed Sensor B Circuit No Signal
P2767 means there is a problem in the input or turbine speed sensor B due to faulty sensors or solenoids, an electrical issue or transmission fluids.
How to Become a Certified Mobile Vehicle Inspector (State Car Inspector Certified) in Rhode Island
Automotive technician jobs include mobile vehicle inspectors. Learn how to do car checks in Rhode Island at the Emissions and Safety Testing website.

Van shuts off - 1992 Dodge B350

A common failure item that may show similar symptoms to your vehicle is the idle air control valve. The vehicle may start, but will generally stall soon or immediately. The idle air control valve meters airflow through the throttle assembly...

Left turn signal malfunction.

Check the bulb contacts, front and rear, and just make sure there is no obvious corrosion. Check the headlight harness connection to the headlight bulbs as well. From what you are describing, there is some sort of short or voltage...

Gas pedal is unresponsive

You may have a couple of different issues going on here. Your car has what is called a throttle position sensor that controls the functioning of the gas pedal. The throttle position sensor monitors the throttle position of the throttle...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com