Jeep Wagoneer Car Thermostat Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(161)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(161)

Car Thermostat Replacement Service

How much does a Car Thermostat Replacement cost?

On average, the cost for a Jeep Wagoneer Car Thermostat Replacement is $161 with $66 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1987 Jeep WagoneerL6-4.0LService typeCar Thermostat ReplacementEstimate$247.49Shop/Dealer Price$290.62 - $397.49
1979 Jeep WagoneerV8-5.9LService typeCar Thermostat ReplacementEstimate$252.59Shop/Dealer Price$302.01 - $427.72
1982 Jeep WagoneerL6-4.2LService typeCar Thermostat ReplacementEstimate$273.61Shop/Dealer Price$328.28 - $469.76
1983 Jeep WagoneerV8-5.9LService typeCar Thermostat ReplacementEstimate$246.91Shop/Dealer Price$294.89 - $416.32
1984 Jeep WagoneerV6-2.8LService typeCar Thermostat ReplacementEstimate$336.61Shop/Dealer Price$407.05 - $595.79
1983 Jeep WagoneerL6-4.2LService typeCar Thermostat ReplacementEstimate$273.61Shop/Dealer Price$328.28 - $469.76
1984 Jeep WagoneerL4-2.5LService typeCar Thermostat ReplacementEstimate$531.77Shop/Dealer Price$649.60 - $980.84
1978 Jeep WagoneerV8-5.9LService typeCar Thermostat ReplacementEstimate$257.59Shop/Dealer Price$307.24 - $433.14
Show example Jeep Wagoneer Car Thermostat Replacement prices

What is an engine cooling system thermostat and how does it work?

The car's engine cooling system thermostat is a small valve within a cooling system passageway that opens and closes in response to the temperature of the circulating engine coolant. When your car is first started and the coolant is cold, the valve in the thermostat will be in the closed position, circulating the coolant flow only within the engine instead of flowing to the radiator, which allows the engine to warm up fast, promoting fuel efficiency, low emissions, and reduced engine deposits. Once the engine coolant reaches the design temperature, usually around 195 degrees, the valve will open and close as you drive in order to maintain a coolant temperature typically between 195 to 225 degrees Fahrenheit.

Thermostat

When to consider replacing the engine cooling system thermostat:

  • Engine overheats. A thermostat with the valve stuck closed is a common cause of engine overheating. However, since there are other causes of overheating, a mechanic will thoroughly inspect the cooling system prior to condemning the thermostat. Since it is usually not known how badly the engine overheated, the mechanic will also try to determine if there is evidence that the cylinder head gasket was blown. If so, it would be repaired prior to replacing the thermostat.
  • Temperature gauge reads too low or too high. Thermostats can get sticky, causing the engine temperature to stray from the optimal range. Your dash-mounted temperature gauge will notify you of this malfunction.
  • Cooling system repairs. All thermostats eventually fail. Therefore, if the cooling system is already open for major repairs, such as water pump or radiator replacement, it is recommended to install a new thermostat simply as insurance against future breakdown.

How do mechanics replace the engine cooling system thermostat?

  • Once the engine is completely cold, the radiator cap is loosened and enough coolant is drained from the radiator so the coolant level is below the thermostat housing.
  • The thermostat housing is removed and the thermostat and gasket are extracted. Note that some cars have more than one cooling system thermostat and both might need replacement.
  • All mounting surfaces on the thermostat housing are cleaned of old gasket material. A new gasket is applied and the thermostat is re-installed in the correct orientation and with the temperature sensing cylinder facing downward towards the engine.
  • The thermostat housing bolts are tightened to original equipment manufacturer (OEM) specifications using a calibrated inch-pound torque wrench.
  • The cooling system is refilled with the appropriate coolant type and the system is fully bled of all air.
  • The car engine is run until the normal operating temperature is reached, and while taking precautions with the hot coolant, the coolant level is rechecked while confirming there is flow through the radiator — either visually or with an infrared temperature gun. This will confirm the thermostat is open. Finally, the engine is checked for leaks.

Is it safe to drive with an engine cooling system thermostat problem?

No. If it has been determined that there is a thermostat problem, it should be repaired right away. Failure to do so can cause substantial and costly damage to the engine.

When replacing the engine cooling system thermostat keep in mind:

  • Engine overheating due to causes other than a faulty thermostat, will themselves damage a thermostat. Therefore, always replace the thermostat if the engine overheats, even if the thermostat was not the initial cause of the overheating.
  • The thermostat should be replaced anytime you have major work done on the coolant system. It is convenient and costs little during such repairs and insurance against future breakdown.
  • OEM thermostats are the best ones to use and you can request your mechanic to install only the OEM thermostat. Dealer supplied, OEM thermostats are sometimes more costly but are generally higher quality and specifically engineered for your car.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Jeep mechanics

Real customer reviews from Jeep owners like you.

Excellent Rating

(161)

Rating Summary
154
5
0
0
2
154
5
0
0
2

Jeff

33 years of experience
441 reviews
Jeff
33 years of experience
Jeep Wagoneer L6-4.0L - Starter - Davis, California
Jeff was fantastic I was sceptic all about using this service and he made it amazing did a great job in a timely manner really can't say enough good things about this experience!

Ben

41 years of experience
1410 reviews
Ben
41 years of experience
Jeep Wagoneer L6-4.0L - Automatic Transmission Fluid Service - Houston, Texas
Ben did a fantastic job!

John

6 years of experience
35 reviews
John
6 years of experience
Jeep Liberty V6-3.7L - Thermostat - Bellevue, Washington
I greatly recommend John. He is very professional and meticulous, and he gives very good advice.

Jeremy

20 years of experience
592 reviews
Jeremy
20 years of experience
Jeep Patriot L4-2.4L - Thermostat - West Palm Beach, Florida
Jeremy was great. He did great work and made sure he spoke to us about everything so that we understood. He literally saved our wedding! If it wasn’t for him we would not have been able to make it to the destination to be married!

Excellent Rating

(161)

Rating Summary
154
5
0
0
2
154
5
0
0
2
Number of Jeep Car Thermostat Replacement services completed
1771+
services done by our mechanics
TOTAL NUMBER OF EXPERT Jeep MECHANICS
1300+
experts on our platform

Recent articles & questions

P2006 OBD-II Trouble Code: Intake Manifold Runner Control Stuck Closed Bank 1
P2006 trouble code definition The P2006 code is a generic OBD2 diagnostic trouble code relating to the intake manifold runner control circuit....
Child Seat Safety Laws in Virginia
When When you secure your child in a properly installed child seat, you reduce his or her chances of being injured in a motor vehicle accident by 69%, and of being killed by 71%. It just makes sense to obey...
All About Full Coverage Car Insurance
Car insurance keeps car owners protected. Full coverage car insurance includes state-mandated coverage, plus collision and comprehensive coverage.

Van squeaking and not starting all the time.

Assuming that the battery is good, yes a jump start will give it enough power to start the van. As for the overheating issue, since it is intermittent the most likely cause is air in the system. I would recommend...

Little bit of crankshaft wobble

After watching the video myself, I can say that you have no problems to worry about. The crankshaft is not bent. The wobble is in the front crankshaft pulley. The outer pulley is mounted to the inner hub by rubber...

Blowing oil through valve covers.

Hi there. Check the positive crankcase ventilation valve (PCV) and see if it's plugged up. Also, check the engine oil and make sure that there is the proper amount of oil in the engine. Too much oil or a sticking...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com