Jeep Commander Emergency Brake Control Replacement at your home or office.

What is the Emergency Brake Control all about?

Your vehicle is equipped with brakes on all four wheels to slow down and stop your vehicle while driving, and to hold your vehicle in position when you are engaged in gear. When your vehicle is equipped with an automatic transmission, a parking pawl is engaged when you put your shifter in park. But when you are parked on an incline, or if your vehicle is equipped with a manual transmission, what prevents your vehicle from rolling? Every vehicle is equipped with a parking brake, or emergency brake, that is manually applied for those circumstances.

An emergency brake pedal is pressed by foot and released by pressing a second time or pulling a release handle. A parking brake, or handbrake lever, is engaged by pulling up on it and released by pressing a button on the end of the lever and lowering the handle. In either situation, an emergency brake cable is attached to the mechanism and connects to the rear brakes. When the lever or pedal are engaged, the cable is pulled and the emergency brake shoes in the rear brakes are locked in place. The vehicle is not able to roll. If the emergency brake control lever or pedal will not hold in place, or will not engage the parking brake, it may require repairs.