Jeep Commander Windows Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(249)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(249)

Windows Inspection Service

How much does a Windows Inspection cost?

On average, the cost for a Jeep Commander Windows Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2006 Jeep CommanderV8-4.7LService typeWindows InspectionEstimate$114.99Shop/Dealer Price$124.99 - $132.49
2009 Jeep CommanderV6-3.7LService typeWindows InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2007 Jeep CommanderV8-4.7LService typeWindows InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2008 Jeep CommanderV8-5.7LService typeWindows InspectionEstimate$94.99Shop/Dealer Price$104.99 - $112.48
2010 Jeep CommanderV8-5.7LService typeWindows InspectionEstimate$94.99Shop/Dealer Price$105.02 - $112.55
2008 Jeep CommanderV8-4.7LService typeWindows InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2007 Jeep CommanderV8-5.7LService typeWindows InspectionEstimate$99.99Shop/Dealer Price$109.87 - $117.28
2009 Jeep CommanderV8-5.7LService typeWindows InspectionEstimate$99.99Shop/Dealer Price$110.24 - $117.94
Show example Jeep Commander Windows Inspection prices

The windows on a car keep the interior safe, warm and dry. They allow fresh air in and make it easy to order at a drive thru window. If a window gets stuck up or down it can create a very unpleasant situation for the driver and passengers.

There can be a number of different problems with vehicle windows. The issue can vary from a blown fuse to a window switch that is not working. In some cases the glass can actually fall into the door.

Regardless of the problem, it should be fixed quickly, a malfunctioning window is not only inconvenient, it can also be dangerous.

How this system works:

Power Windows

The glass sits in a part called a regulator, which is pushed up and down by a small electric motor. The motor is attached to a worm gear and a number of spur gears, which creates a gear reduction, producing enough torque to lift the window while also keeping it level. When the window button is pushed the door module closes a relay, which then provides power to the window motor. The majority of problems with a power window are caused by the electrical system but faulty gears can also be the culprit.

Manual Windows

The glass is attached to a regulator, which is the component that pushes the window up and down. The handle sticks through the door panel and when the handle is cranked it moves the regulator up or down. Manual windows are rapidly being replaced by power windows.

Common reasons for this to happen:

  • Blown Fuse: If none of the power windows are functioning there is a good chance that the problem is a blown fuse or a bad relay. While these are two separate issues, the symptoms are often very similar. A complete inspection of the fuses and electrical system will be necessary to determine where the problem is and how to repair it.

  • Burned Out Motor: if the windows are not going up or down and there is no noise coming from the door when the switch is pressed there is a good chance the electric motor is burned out or malfunctioning. The motor will have to be replaced.

  • Power Window Regulator: If the motor is running when the switch is pressed but the window does not move, the regulator is likely damaged or malfunctioning. There are a number of parts that can break on a regulator. In this situation the regulator will have to be repaired or replaced.

  • Malfunctioning Motor: If the window is still moving up and down but very slowly, the electric motor may be malfunctioning. If it is making a whining sound this can also indicate a problem. As the motor ages it will wear out and eventually it will have to be replaced.

  • Broken Window Tracks: There are window track guides, which hold the window in place as it goes up and down. If the track guides are damaged it can cause problems with the window going up and down. Common symptoms include a slow moving window, and a rattling or grinding noise. Eventually, the window may fall inside the door.

  • Worn Window Switch: The power window switch gets used a lot and eventually it can wear out which will prevent power from going to the window. If this happens the window can end up stuck in the up or down position.

  • Bad Wiring: Wiring is integral to the operation of the power windows and if there is a short, a faulty switch or a malfunctioning relay it can bring the whole system to a halt. A professional should deal with wiring issues.

  • Broken Regulator Manual Window: If the window is starting to tilt sideways, the most likely cause is a broken regulator. The wheels on the end of a regulator will often break off which will cause the glass to tilt sideways, and eventually fall into the door.

What to expect:

A top-­rated mobile mechanic will come to your home or office to determine the source and cause of the window issue, and will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How important is this service?

A malfunctioning window is certainly not a life threatening situation but it can lead to interior damage and unsafe situations if the window is stuck in the down position. The flip side of that coin is a window stuck in the up position which can make it impossible to order at a drive-thru or use the window as an escape exit in the event of an emergency.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Jeep mechanics

Real customer reviews from Jeep owners like you.

Excellent Rating

(249)

Rating Summary
233
8
3
0
5
233
8
3
0
5

Chuy

14 years of experience
406 reviews
Chuy
14 years of experience
Jeep Commander V6-3.7L - Car Horn Replacement - Harvey, Illinois
Chuy's work ethic was good but job is not finished.

Dellano

18 years of experience
515 reviews
Dellano
18 years of experience
Jeep Commander V6-3.7L - Oil Change - Rockville, Maryland
He was very personable and thorough. He called to inform me he was on the way and arrived early. Great customer service.

Nathaniel

10 years of experience
326 reviews
Nathaniel
10 years of experience
Jeep Commander V8-5.7L - Starter - Norfolk, Virginia
Nathaniel was early, prompt and effectient. He did a great job on the vehicle and everything is working as intended. Great experience

Michael

25 years of experience
187 reviews
Michael
25 years of experience
Jeep Commander V6-3.7L - Valve Cover Gasket - Henderson, Nevada
Timely mechanic that gets the job done.

Excellent Rating

(249)

Rating Summary
233
8
3
0
5
233
8
3
0
5
Number of Jeep Commander services completed
2739+
services done by our mechanics
TOTAL NUMBER OF EXPERT Jeep MECHANICS
1300+
experts on our platform

Recent articles & questions

How to Buy a Good Quality Deer Warning Whistle
While While you might think that other drivers and obstacles in the road are the largest threats to your safety and that of your passengers, the fact remains that wildlife must also be considered. Deer are probably the most worrisome...
How to Wash Cars For Money
The available ways to make a profit are limited only by your imagination but, sometimes, it’s easier to go old-school with something like washing cars (https://www.yourmechanic.com/article/how-to-hand-wash-a-car). It’s a service every driver needs on occasion, and it doesn’t necessarily require a...
P0261 OBD-II Trouble Code: Cylinder 1 Injector Circuit Low
P0261 P0261 code definition Cylinder 1 Injector Circuit Low What the P0261 code means This trouble code indicates that the powertrain control module (https://www.yourmechanic.com/article/what-is-a-vehicle-s-electrical-control-unit) has detected a lower reference voltage coming from the number 1 cylinder’s fuel injector than what...

car bogs down when starting from stop and when going uphill

This may be caused by a number of things, however some common causes of difficulties accelerating like this may be related to things like a faulty mass air flow sensor or a clogged catalytic converter (specifically known to cause poor...

Does a stuck thermostat set off a Check Engine Light?

Hey there. A stuck open thermostat (https://www.yourmechanic.com/services/thermostat-replacement) can cause the engine to take too long to warm up, not reach proper operating temperature at all, possibly run rich, and MAYBE set that fault code. The engine electronics are programmed to...

Can very dirty trans fluid make me car overheat?

Hi Amber. Thanks for contacting us today. Although the cooling system of the car does not flow through the transmission, dirty transmission fluid can cause the transmission to overheat, cause more drag on the motor and increase the operating temperature...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com