Infiniti G20 Front Crankshaft Seal Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(74)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(74)

Front Crankshaft Seal Replacement Service

How much does a Front Crankshaft Seal Replacement cost?

On average, the cost for a Infiniti G20 Front Crankshaft Seal Replacement is $172 with $18 for parts and $154 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1992 Infiniti G20L4-2.0LService typeFront Crankshaft Seal ReplacementEstimate$206.62Shop/Dealer Price$222.58 - $254.87
1993 Infiniti G20L4-2.0LService typeFront Crankshaft Seal ReplacementEstimate$196.71Shop/Dealer Price$209.27 - $239.01
1991 Infiniti G20L4-2.0LService typeFront Crankshaft Seal ReplacementEstimate$196.71Shop/Dealer Price$209.32 - $239.09
1999 Infiniti G20L4-2.0LService typeFront Crankshaft Seal ReplacementEstimate$302.48Shop/Dealer Price$321.58 - $366.45
2001 Infiniti G20L4-2.0LService typeFront Crankshaft Seal ReplacementEstimate$302.48Shop/Dealer Price$325.97 - $374.13
1994 Infiniti G20L4-2.0LService typeFront Crankshaft Seal ReplacementEstimate$196.71Shop/Dealer Price$209.59 - $239.56
1996 Infiniti G20L4-2.0LService typeFront Crankshaft Seal ReplacementEstimate$196.71Shop/Dealer Price$209.35 - $239.14
2002 Infiniti G20L4-2.0LService typeFront Crankshaft Seal ReplacementEstimate$302.48Shop/Dealer Price$321.58 - $366.45
Show example Infiniti G20 Front Crankshaft Seal Replacement prices

What is the Front Crankshaft Seal all about?

A number of mechanisms must work together to make your vehicle move forward. One of the most important is the crankshaft, which converts rotary into linear motion; i.e., it transforms the force created by the engine's pistons moving up and down into a force that moves in a circular motion that causes a car’s wheel to turn. Enclosed in what’s called a crankcase—the largest cavity in the engine block, just below the cylinders—the crankshaft must be completely lubricated, essentially submerged in oil, to spin nearly friction-free and do its job properly.

Consequently, there are seals located at either end of the crankshaft that allow it to spin freely and keep engine oil from escaping the engine block, as well as prevent contaminants and other debris from entering and causing damage to the mechanism. Since there are two ends of the crankshaft, there are two types of seals: the front crankshaft seal and the rear crankshaft seal, also known as the front main and rear main seals.

Keep in mind:

  • Loss of oil will eventually cause serious internal engine damage.
  • Inspect the sealing surface of the crankshaft or the crankshaft pulley (depending on the engine design) for damage when replacing the crankshaft seal.
  • Oil degrades rubber components.

How it's done:

  • The vehicle is raised and supported on jack stands
  • The crankshaft damper and timing belt is removed
  • The crankshaft seal is removed and a new one installed
  • The timing belt and cover along with crankshaft damper is reinstalled
  • The engine accessory belts are installed and the vehicle is lowered off of the jack stands

Our recommendation:

One of the most important parts of your car, crankshaft seals are typically made from a durable material, such as a synthetic rubber or silicone, designed to handle the extreme pressure and temperatures as well as the caustic chemicals in your engine oil. Because they are exposed to such abuse, main seals are subject to a lot of wear and tear. And whether you are talking a front or rear main seal, replacement is the only cure when one malfunctions.

The good news is that the seals are relatively inexpensive components. The bad news is that neither is easy to replace.

Front seal: The front seal is located behind the main pulley that drives all the belts, which is, of course, always spinning. The main pulley throws any leaking oil out in a big circle. It can get thrown up on the alternator, steering pump, belts, in short anything attached to the front of the engine and cause a real mess and eventually some serious damage. Consequently, it has to be removed along with many of the components attached to the front of the block to replace the front main seal.

Rear seal: The rear crankshaft seal is placed along with the transmission; therefore, the process of replacing it requires the removal of transmission, as well as the clutch and flywheel assembly. This is a very involved job.

What common symptoms indicate you may need to replace the Front Crankshaft Seal?

  • Oil leaking from the front crank pulley.
  • Oil dripping from the bottom of the clutch housing, where the block and transmission meet.
  • Clutch slip caused by oil spraying on the clutch.

How important is this service?

Letting either crankshaft seal continue to leak can be detrimental to your vehicle’s continued operation. Besides the maladies caused by driving around with little to no oil flowing in the engine, the faulty seal will be spread oil through the engine bay and undercarriage of your car as you drive, a mess that is difficult to clean up and can be a fire hazard. Replacing is better addressed sooner than later.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Infiniti mechanics

Real customer reviews from Infiniti owners like you.

Excellent Rating

(74)

Rating Summary
70
2
0
0
2
70
2
0
0
2

Joshua

28 years of experience
709 reviews
Joshua
28 years of experience
Infiniti G20 L4-2.0L - Alternator - Vallejo, California
Very great mobile mechanic company. Josh was very punctual, kind, and knowledgable.

Matthew

34 years of experience
1438 reviews
Matthew
34 years of experience
Infiniti G20 L4-2.0L - Engine or Transmission Mount Replacement - Newport News, Virginia
I'm very happy with how my car is driving after the repair. I would recommend them highly.

Raymond

38 years of experience
613 reviews
Raymond
38 years of experience
Infiniti G20 L4-2.0L - Car is not starting - Las Vegas, Nevada
Raymond was absolutely fantastic!! He arrived early which was great! He was fast but efficient. It was apparent that he knows cars from the time he arrived. He had a pleasant attitude. I will definitely always request Raymond!

Jeff

34 years of experience
441 reviews
Jeff
34 years of experience
Infiniti G20 L4-2.0L - Axle / CV Shaft Assembly Replacement (Passenger Side Front) - Sacramento, California
He managed to swing by my house despite it being wet due to some previous rainfall, he fixed my passenger CV axle in about an hour, and he was friendly, so he's definitely a good mechanic in my books.

Excellent Rating

(74)

Rating Summary
70
2
0
0
2
70
2
0
0
2
Number of Infiniti G20 services completed
814+
services done by our mechanics
TOTAL NUMBER OF EXPERT Infiniti MECHANICS
1000+
experts on our platform

Recent articles & questions

The Guide to Right-of-Way Laws in Montana
Right-of-way Right-of-way laws exist for the protection of motorists and pedestrians. There are no winners in collisions between vehicles, or between vehicles and pedestrians. So, to reduce the likelihood of property damage, injuries and even death, Montana has common sense...
How to Adjust Windshield Washer Nozzles
Windshield washer nozzles spray water and allow the driver to clean the windshield. These nozzles can be adjusted once they fail or stop working.
Windshield Laws in Hawaii
Driving Driving on the roads in Hawaii requires that you know the traffic laws that you have to follow. However, in addition to the rules of the road, you also have to make sure your windshield meets the requirements of...

How do you tilt the steering wheel?

Your car is equipped with a tilt steering feature that lets you adjust the angle of the steering wheel. This provides you with the means to customize your driving position for your height and other preferences. Here’s how to do...

Oil leak; car won't start

These issues may be related or they may be completely separate. The most common cause of a no-start is a failed battery. Oil leaks are extremely common and usually caused by failed seals and gaskets. The car also may also...

Running lights randomly turning on when car is off/blinker stick not staying in on position

The BCM would need to be tested to see if it is getting the proper signals from the headlight switch (https://www.yourmechanic.com/article/symptoms-of-a-bad-or-failing-headlight-switch) and turn signal switch (https://www.yourmechanic.com/article/symptoms-of-a-bad-or-failing-turn-signal-switch). The BCM is a major problem and and has caused various problems with the...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com