Ford F-250 Brake Vacuum Pump Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(124)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(124)

Brake Vacuum Pump Replacement Service

How much does a Brake Vacuum Pump Replacement cost?

On average, the cost for a Ford F-250 Brake Vacuum Pump Replacement is $292 with $197 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1964 Ford F-250V8-4.8LService typeBrake Vacuum Pump ReplacementEstimate$702.95Shop/Dealer Price$859.94 - $1308.41
1969 Ford F-250V8-5.0LService typeBrake Vacuum Pump ReplacementEstimate$686.25Shop/Dealer Price$844.08 - $1295.04
1974 Ford F-250L6-4.9LService typeBrake Vacuum Pump ReplacementEstimate$686.25Shop/Dealer Price$844.08 - $1295.04
1994 Ford F-250V8-5.8LService typeBrake Vacuum Pump ReplacementEstimate$523.59Shop/Dealer Price$640.74 - $969.68
1968 Ford F-250L6-4.9LService typeBrake Vacuum Pump ReplacementEstimate$686.25Shop/Dealer Price$844.10 - $1295.07
1970 Ford F-250V8-5.9LService typeBrake Vacuum Pump ReplacementEstimate$686.25Shop/Dealer Price$844.08 - $1295.04
1991 Ford F-250V8-5.8LService typeBrake Vacuum Pump ReplacementEstimate$560.79Shop/Dealer Price$685.87 - $1038.88
1981 Ford F-250V8-5.8LService typeBrake Vacuum Pump ReplacementEstimate$691.25Shop/Dealer Price$849.32 - $1300.46
Show example Ford F-250 Brake Vacuum Pump Replacement prices

What is the Brake Vacuum Pump all about?

The brake booster is a device that helps enhance the effects of the hydraulic braking system in cars as a supplement to the primary braking mechanism. Each time you push the brake pedal, the force transfers to a rod. This rod passes through the brake booster and reaches the master cylinder. The pressure from the rod activates the master cylinder piston and works on the hydraulic braking systems.

The brake booster chamber contains a vacuum the engine creates. This chamber has two sections, separated vertically by way of a rubber diaphragm. When the brake pedal pushes the rod, a small amount of air is let into the chamber on the brake pedal side through a valve that also seals off the vacuum. This air pressure on one side of the diaphragm helps enhance the force of the brake.

However, in case of cars that have turbo charging or use diesel as fuel, the engine does not create the necessary vacuum. Thus, they need an additional brake booster vacuum pump to draw out the air and create the vacuum needed for the brake booster to function. Vehicles that typically run in locations of high altitude also need a brake booster vacuum pump.

The brake booster vacuum pump reduces dependency on the engine for the vacuum and can work independently of it. This device uses an electrical control circuit to work. It activates with a signal from the brake booster vacuum sensor that monitors the levels of the vacuum in the brake booster.

Keep in mind:

  • The brake booster vacuum pump should be able to maintain up to 18” of vacuum for the brake booster to be effective.
  • If you notice that the pedal has slipped to the floor of the car and you hear a hissing sound, this could be an indication of a leak in the air line or pump to the brake booster vacuum pump.

How it's done:

  • The battery is disconnected. The faulty brake booster vacuum pump is located and identified. The vehicle is raised and supported on jack stands as needed. The engine under shield is removed for access.

  • The brake booster vacuum pump hoses and electrical connector are disconnected. The brake booster vacuum pump is removed from the mounting bracket.

  • The new brake booster vacuum pump is installed onto the mounting bracket. The hoses and electrical connector are installed to the new brake booster vacuum pump. The battery is reconnected.

  • The brakes are tested for proper brake booster vacuum pump operation. The engine shield is reinstalled. The vehicle is removed from the jack stands.

  • The vehicle is road tested and checked for proper brake booster vacuum pump and brakes operation.

Our recommendation:

If you notice the brakes are not responding as they should, book an appointment with one of our expert mechanics and have the brake booster system completely inspected. The mechanic will check the brake booster vacuum pump for damage and advise you if it needs replacing. Refer to the owner’s manual for recommendations on the frequency in which you must have the brake booster vacuum pump replaced.

What common symptoms indicate you may need to replace the Brake Vacuum Pump?

  • Delayed brake response
  • Excessive pressure is needed to make the brake respond
  • A hissing sound when you press the brake pedal
  • Brake pedal slips to the floor of the car when the engine is running and the car is stationary
  • Braking becomes especially difficult in heavy traffic areas when the brakes need to be applied in quick succession

How important is this service?

A malfunctioning brake booster vacuum pump will not create the adequate vacuum needed for the brake boosters or power brakes to function. This undermines the effectiveness of your brakes and can be a safety hazard.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Ford mechanics

Real customer reviews from Ford owners like you.

Excellent Rating

(124)

Rating Summary
115
4
0
1
4
115
4
0
1
4

Chris

22 years of experience
2241 reviews
Chris
22 years of experience
Ford F-250 V8-5.9L - Car is not starting - Newport Beach, California
Solved the problem of what it needed. Very prompt. ><>

David

16 years of experience
636 reviews
David
16 years of experience
Ford F-250 V8-5.8L - Car is not starting - Suisun City, California
Phenomenal mechanic! I was having trouble getting my car to run, but he got it taken care of in under a half hour!

Charles

17 years of experience
176 reviews
Charles
17 years of experience
Ford F-250 V8-5.8L - Car is not starting - Redwood City, California
Charles was on time and very helpful. I learned some good pointers in managing my old 1977 truck to keep it running and to avoid potential problems in the future.

Keith

18 years of experience
374 reviews
Keith
18 years of experience
Ford F-250 V8-5.8L - Check Engine Light is on - Lakeland, Florida
Keith was great, took the time to explain every recommendation and show me just what was wrong, On time and pleasant.

Excellent Rating

(124)

Rating Summary
115
4
0
1
4
115
4
0
1
4
Number of Ford F-250 services completed
1364+
services done by our mechanics
TOTAL NUMBER OF EXPERT Ford MECHANICS
1700+
experts on our platform

Recent articles & questions

P0019 OBD-II Trouble Codes: Crankshaft Position - Camshaft Position Correlation (Bank 2 Sensor B)
P0019 P0019 code definition Crankshaft Position - Camshaft Position Correlation (Bank 2 Sensor B) What the P0019 code means P0019 is the OBD-II generic code indicating that the crankshaft and Variable Valve Timing (VVT) position sensor B for bank 2...
P0449 OBD-II Trouble Code: Evaporative Emission Control System Vent Valve/Solenoid Circuit Malfunction
P0449 code definition P0449 is a general OBD2 diagnostic trouble code indicating an issue with the EVAP vent control circuit. This code...
Hawaii Parking Laws: Understanding the Basics
It It can be difficult to find a parking space in Hawaii. Some people feel that they don’t have to obey the law and that they do not have to be courteous to others when they need to find a...

How do I use the Bluetooth HandsFreeLink®?

Some 2012 Accords came equipped with the Bluetooth HandsFreeLink® (HFL) system. If your car has this onboard, it can be used to allow hands free communication through your smartphone and the car’s audio system. You’ll see the buttons on the...

Oil light on

The oil light (https://www.yourmechanic.com/article/is-it-safe-to-drive-with-the-oil-light-on) typically calls for the oil pressure to be tested. You may need to replace the sending unit or fix the cause of the low oil pressure in the engine. The jerking in the engine would depend...

Clicking engine noise after low oil

If you ran the engine low on oil (https://www.yourmechanic.com/services/oil-level-is-low-inspection) then you may have damaged all the bearings in the engine and the noise may be in the camshaft lobes as they can get worn from lack of lube. Your engine...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com