Ford Aspire Front Crankshaft Seal Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(8)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(8)

Front Crankshaft Seal Replacement Service

How much does a Front Crankshaft Seal Replacement cost?

On average, the cost for a Ford Aspire Front Crankshaft Seal Replacement is $480 with $290 for parts and $190 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1994 Ford AspireL4-1.3LService typeFront Crankshaft Seal ReplacementEstimate$833.18Shop/Dealer Price$1000.23 - $1451.88
1996 Ford AspireL4-1.3LService typeFront Crankshaft Seal ReplacementEstimate$770.18Shop/Dealer Price$935.27 - $1385.45
1995 Ford AspireL4-1.3LService typeFront Crankshaft Seal ReplacementEstimate$770.18Shop/Dealer Price$935.27 - $1385.44
1997 Ford AspireL4-1.3LService typeFront Crankshaft Seal ReplacementEstimate$770.18Shop/Dealer Price$935.22 - $1385.36
Show example Ford Aspire Front Crankshaft Seal Replacement prices

What is the Front Crankshaft Seal all about?

A number of mechanisms must work together to make your vehicle move forward. One of the most important is the crankshaft, which converts rotary into linear motion; i.e., it transforms the force created by the engine's pistons moving up and down into a force that moves in a circular motion that causes a car’s wheel to turn. Enclosed in what’s called a crankcase—the largest cavity in the engine block, just below the cylinders—the crankshaft must be completely lubricated, essentially submerged in oil, to spin nearly friction-free and do its job properly.

Consequently, there are seals located at either end of the crankshaft that allow it to spin freely and keep engine oil from escaping the engine block, as well as prevent contaminants and other debris from entering and causing damage to the mechanism. Since there are two ends of the crankshaft, there are two types of seals: the front crankshaft seal and the rear crankshaft seal, also known as the front main and rear main seals.

Keep in mind:

  • Loss of oil will eventually cause serious internal engine damage.
  • Inspect the sealing surface of the crankshaft or the crankshaft pulley (depending on the engine design) for damage when replacing the crankshaft seal.
  • Oil degrades rubber components.

How it's done:

  • The vehicle is raised and supported on jack stands
  • The crankshaft damper and timing belt is removed
  • The crankshaft seal is removed and a new one installed
  • The timing belt and cover along with crankshaft damper is reinstalled
  • The engine accessory belts are installed and the vehicle is lowered off of the jack stands

Our recommendation:

One of the most important parts of your car, crankshaft seals are typically made from a durable material, such as a synthetic rubber or silicone, designed to handle the extreme pressure and temperatures as well as the caustic chemicals in your engine oil. Because they are exposed to such abuse, main seals are subject to a lot of wear and tear. And whether you are talking a front or rear main seal, replacement is the only cure when one malfunctions.

The good news is that the seals are relatively inexpensive components. The bad news is that neither is easy to replace.

Front seal: The front seal is located behind the main pulley that drives all the belts, which is, of course, always spinning. The main pulley throws any leaking oil out in a big circle. It can get thrown up on the alternator, steering pump, belts, in short anything attached to the front of the engine and cause a real mess and eventually some serious damage. Consequently, it has to be removed along with many of the components attached to the front of the block to replace the front main seal.

Rear seal: The rear crankshaft seal is placed along with the transmission; therefore, the process of replacing it requires the removal of transmission, as well as the clutch and flywheel assembly. This is a very involved job.

What common symptoms indicate you may need to replace the Front Crankshaft Seal?

  • Oil leaking from the front crank pulley.
  • Oil dripping from the bottom of the clutch housing, where the block and transmission meet.
  • Clutch slip caused by oil spraying on the clutch.

How important is this service?

Letting either crankshaft seal continue to leak can be detrimental to your vehicle’s continued operation. Besides the maladies caused by driving around with little to no oil flowing in the engine, the faulty seal will be spread oil through the engine bay and undercarriage of your car as you drive, a mess that is difficult to clean up and can be a fire hazard. Replacing is better addressed sooner than later.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Ford mechanics

Real customer reviews from Ford owners like you.

Excellent Rating

(8)

Rating Summary
8
0
0
0
0
8
0
0
0
0

Trung

12 years of experience
412 reviews
Trung
12 years of experience
Ford Aspire L4-1.3L - Valve Cover Gasket - Union City, California
Trung was on time... and did great work within the expected timeframe. Explained and showed what he did during the repairs! Excellent customer service! Job well done! Thanks Trung!

Matthew

33 years of experience
1210 reviews
Matthew
33 years of experience
Ford Aspire L4-1.3L - Car is overheating - Williamsburg, Virginia
diagnosed my car for me

Noe

36 years of experience
604 reviews
Noe
36 years of experience
Ford Aspire L4-1.3L - Other Inspections - Federal Way, Washington
Noe did an excellent job! He was quick and explained the problem in detail. The problem was very minor and did not require any replacement parts, so he had helped me save even more! He did an overall inspection of my vehicle as well, and let me know my car is in great shape. It makes me feel safe driving my vehicle! I highly recommend Noe's services!

Jeff

33 years of experience
441 reviews
Jeff
33 years of experience
Ford Aspire L4-1.3L - Distributor - Sacramento, California
Car runs great Thantyou.

Excellent Rating

(8)

Rating Summary
8
0
0
0
0
8
0
0
0
0
Number of Ford Aspire services completed
88+
services done by our mechanics
TOTAL NUMBER OF EXPERT Ford MECHANICS
1700+
experts on our platform

Recent articles & questions

A Buyer's Guide to the 2012 Scion xB
If If you want an SUV because of the spacious interior, the 2012 Scion xB is a great choice. It’s easily one of the most affordable on the market. Key Features The four-cylinder power on the 2012 Scion xB may...
How to Adjust a Parking Brake Shoe
Before you begin, it’s important to be familiar with your specific parking brake (https://www.yourmechanic.com/services/parking-brake-won-t-engage-inspection) system. While all systems accomplish the same...
P3484 OBD-II Trouble Code: Cylinder 11 Deactivation/Intake Valve Control Circuit High
P3484 code means cylinder 11 was deactivated during certain driving conditions due to low oil pressure, engine condition, or electrical components.

Engine won’t start sometimes, problem goes away later

Jeep released a Technical Service Bulletin (TSB) that covers this no crank or no start problem. The TSB 08-007-08 dated 7/04/2008 states that the wireless control module (WCM) is susceptible to locking the ignition after getting a static charge from...

My 2005 jag xj8 is leaking oil from underneath. I've been told it is front engine seal. How much to repair?

That is a common leak point, although keep in mind, on older engines there can easily be multiple leak points. Sometimes the front crankshaft seal will actually cut a groove in the sealing surface on the harmonic balancer. If a...

I have a 2008 GMC Sierra 1500 4x4. When i turn to the right my driver side front makes a grinding and popping noise.

Hi Kyle. Thanks for contacting us today. Generally speaking, this type of noise is an indication of a wheel bearing that has lost lubricity and the noise you are hearing is metal to metal contact. It's also quite possible that...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com