Ford Aspire Brake Vacuum Pump Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(8)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(8)

Brake Vacuum Pump Replacement Service

How much does a Brake Vacuum Pump Replacement cost?

On average, the cost for a Ford Aspire Brake Vacuum Pump Replacement is $442 with $296 for parts and $146 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1997 Ford AspireL4-1.3LService typeBrake Vacuum Pump ReplacementEstimate$766.25Shop/Dealer Price$909.57 - $1349.64
1994 Ford AspireL4-1.3LService typeBrake Vacuum Pump ReplacementEstimate$766.25Shop/Dealer Price$911.59 - $1353.17
1996 Ford AspireL4-1.3LService typeBrake Vacuum Pump ReplacementEstimate$751.25Shop/Dealer Price$896.44 - $1337.92
1995 Ford AspireL4-1.3LService typeBrake Vacuum Pump ReplacementEstimate$751.25Shop/Dealer Price$900.59 - $1345.17
Show example Ford Aspire Brake Vacuum Pump Replacement prices

What is the Brake Vacuum Pump all about?

The brake booster is a device that helps enhance the effects of the hydraulic braking system in cars as a supplement to the primary braking mechanism. Each time you push the brake pedal, the force transfers to a rod. This rod passes through the brake booster and reaches the master cylinder. The pressure from the rod activates the master cylinder piston and works on the hydraulic braking systems.

The brake booster chamber contains a vacuum the engine creates. This chamber has two sections, separated vertically by way of a rubber diaphragm. When the brake pedal pushes the rod, a small amount of air is let into the chamber on the brake pedal side through a valve that also seals off the vacuum. This air pressure on one side of the diaphragm helps enhance the force of the brake.

However, in case of cars that have turbo charging or use diesel as fuel, the engine does not create the necessary vacuum. Thus, they need an additional brake booster vacuum pump to draw out the air and create the vacuum needed for the brake booster to function. Vehicles that typically run in locations of high altitude also need a brake booster vacuum pump.

The brake booster vacuum pump reduces dependency on the engine for the vacuum and can work independently of it. This device uses an electrical control circuit to work. It activates with a signal from the brake booster vacuum sensor that monitors the levels of the vacuum in the brake booster.

Keep in mind:

  • The brake booster vacuum pump should be able to maintain up to 18” of vacuum for the brake booster to be effective.
  • If you notice that the pedal has slipped to the floor of the car and you hear a hissing sound, this could be an indication of a leak in the air line or pump to the brake booster vacuum pump.

How it's done:

  • The battery is disconnected. The faulty brake booster vacuum pump is located and identified. The vehicle is raised and supported on jack stands as needed. The engine under shield is removed for access.

  • The brake booster vacuum pump hoses and electrical connector are disconnected. The brake booster vacuum pump is removed from the mounting bracket.

  • The new brake booster vacuum pump is installed onto the mounting bracket. The hoses and electrical connector are installed to the new brake booster vacuum pump. The battery is reconnected.

  • The brakes are tested for proper brake booster vacuum pump operation. The engine shield is reinstalled. The vehicle is removed from the jack stands.

  • The vehicle is road tested and checked for proper brake booster vacuum pump and brakes operation.

Our recommendation:

If you notice the brakes are not responding as they should, book an appointment with one of our expert mechanics and have the brake booster system completely inspected. The mechanic will check the brake booster vacuum pump for damage and advise you if it needs replacing. Refer to the owner’s manual for recommendations on the frequency in which you must have the brake booster vacuum pump replaced.

What common symptoms indicate you may need to replace the Brake Vacuum Pump?

  • Delayed brake response
  • Excessive pressure is needed to make the brake respond
  • A hissing sound when you press the brake pedal
  • Brake pedal slips to the floor of the car when the engine is running and the car is stationary
  • Braking becomes especially difficult in heavy traffic areas when the brakes need to be applied in quick succession

How important is this service?

A malfunctioning brake booster vacuum pump will not create the adequate vacuum needed for the brake boosters or power brakes to function. This undermines the effectiveness of your brakes and can be a safety hazard.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Ford mechanics

Real customer reviews from Ford owners like you.

Excellent Rating

(8)

Rating Summary
8
0
0
0
0
8
0
0
0
0

Matthew

34 years of experience
1438 reviews
Matthew
34 years of experience
Ford Aspire L4-1.3L - Axle / CV Shaft Assembly Replacement (Driver Side Front) - Williamsburg, Virginia
Matthew is the best

Trung

13 years of experience
412 reviews
Trung
13 years of experience
Ford Aspire L4-1.3L - Oil Change - Union City, California
Trung is very proficient in getting the job done right the first time and arrives in a timely manner if not earlier than expected. Excellent Customer service! Highly recommend Trung for your vehicle repairs. Thanks Trung! AAA+++

Jeff

34 years of experience
441 reviews
Jeff
34 years of experience
Ford Aspire L4-1.3L - Distributor - Sacramento, California
Car runs great Thantyou.

Trung

13 years of experience
412 reviews
Trung
13 years of experience
Ford Aspire L4-1.3L - Valve Cover Gasket - Union City, California
Trung was on time... and did great work within the expected timeframe. Explained and showed what he did during the repairs! Excellent customer service! Job well done! Thanks Trung!

Excellent Rating

(8)

Rating Summary
8
0
0
0
0
8
0
0
0
0
Number of Ford Aspire services completed
88+
services done by our mechanics
TOTAL NUMBER OF EXPERT Ford MECHANICS
1800+
experts on our platform

Recent articles & questions

Symptoms of a Bad or Failing Fuel Pressure Regulator
Common signs include engine performance issues, fuel leaks, and black smoke coming from the exhaust.
Symptoms of a Bad or Failing Cylinder Head Temperature Sensor
Common signs include long cranking time, engine performance issues, and the Check Engine Light coming on.
P0087 OBD-II Trouble Code: Fuel Rail/System Pressure - Too Low
P0087 trouble code definition P0087 is Fuel Rail/System Pressure - Too Low, indicating a fuel system problem. This code is similar to...

ESP light stays on dash

Hi There, This is something that usually requires the steering angle sensor (https://www.yourmechanic.com/services/steering-angle-sensor-replacement) to be re-calibrated or replaced. I would suggest having a professional from YourMechanic come to your location to have this done. As you may know, the steering...

I ahce a 2007 cts which i recently changed the fuel pump and now i cant get an accurate gauge reading on fuel

Hi, I currently have a 2008 Honda civic. Recently I have been having issues with the battery holding a charge and idling very low. After jumping it this evening it was maintaing a good idle speed while in park but as soon as I put it in drive the rpms dropped and it was struggling just to keep from stalling. After a few minutes of letting the engine heat up i heard a hissing sound then a loud pop followed by more hissing and smoke from under the hood. The appeard to be liquid in the bottom of the front right hand portion of the engine floor but I'm not sure what liquid it was

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com