Chrysler Cirrus Car Thermostat Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(23)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(23)

Car Thermostat Replacement Service

How much does a Car Thermostat Replacement cost?

On average, the cost for a Chrysler Cirrus Car Thermostat Replacement is $225 with $85 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1996 Chrysler CirrusV6-2.5LService typeCar Thermostat ReplacementEstimate$331.70Shop/Dealer Price$379.48 - $514.70
1998 Chrysler CirrusV6-2.5LService typeCar Thermostat ReplacementEstimate$322.69Shop/Dealer Price$368.70 - $502.60
1999 Chrysler CirrusV6-2.5LService typeCar Thermostat ReplacementEstimate$322.69Shop/Dealer Price$368.72 - $502.64
2000 Chrysler CirrusV6-2.5LService typeCar Thermostat ReplacementEstimate$322.69Shop/Dealer Price$368.72 - $502.64
2000 Chrysler CirrusL4-2.4LService typeCar Thermostat ReplacementEstimate$318.99Shop/Dealer Price$365.57 - $497.82
1997 Chrysler CirrusV6-2.5LService typeCar Thermostat ReplacementEstimate$322.69Shop/Dealer Price$368.86 - $502.89
2000 Chrysler CirrusL4-2.0LService typeCar Thermostat ReplacementEstimate$335.33Shop/Dealer Price$384.54 - $527.95
1995 Chrysler CirrusL4-2.4LService typeCar Thermostat ReplacementEstimate$316.61Shop/Dealer Price$361.12 - $490.48
Show example Chrysler Cirrus Car Thermostat Replacement prices

What is an engine cooling system thermostat and how does it work?

The car's engine cooling system thermostat is a small valve within a cooling system passageway that opens and closes in response to the temperature of the circulating engine coolant. When your car is first started and the coolant is cold, the valve in the thermostat will be in the closed position, circulating the coolant flow only within the engine instead of flowing to the radiator, which allows the engine to warm up fast, promoting fuel efficiency, low emissions, and reduced engine deposits. Once the engine coolant reaches the design temperature, usually around 195 degrees, the valve will open and close as you drive in order to maintain a coolant temperature typically between 195 to 225 degrees Fahrenheit.

Thermostat

When to consider replacing the engine cooling system thermostat:

  • Engine overheats. A thermostat with the valve stuck closed is a common cause of engine overheating. However, since there are other causes of overheating, a mechanic will thoroughly inspect the cooling system prior to condemning the thermostat. Since it is usually not known how badly the engine overheated, the mechanic will also try to determine if there is evidence that the cylinder head gasket was blown. If so, it would be repaired prior to replacing the thermostat.
  • Temperature gauge reads too low or too high. Thermostats can get sticky, causing the engine temperature to stray from the optimal range. Your dash-mounted temperature gauge will notify you of this malfunction.
  • Cooling system repairs. All thermostats eventually fail. Therefore, if the cooling system is already open for major repairs, such as water pump or radiator replacement, it is recommended to install a new thermostat simply as insurance against future breakdown.

How do mechanics replace the engine cooling system thermostat?

  • Once the engine is completely cold, the radiator cap is loosened and enough coolant is drained from the radiator so the coolant level is below the thermostat housing.
  • The thermostat housing is removed and the thermostat and gasket are extracted. Note that some cars have more than one cooling system thermostat and both might need replacement.
  • All mounting surfaces on the thermostat housing are cleaned of old gasket material. A new gasket is applied and the thermostat is re-installed in the correct orientation and with the temperature sensing cylinder facing downward towards the engine.
  • The thermostat housing bolts are tightened to original equipment manufacturer (OEM) specifications using a calibrated inch-pound torque wrench.
  • The cooling system is refilled with the appropriate coolant type and the system is fully bled of all air.
  • The car engine is run until the normal operating temperature is reached, and while taking precautions with the hot coolant, the coolant level is rechecked while confirming there is flow through the radiator — either visually or with an infrared temperature gun. This will confirm the thermostat is open. Finally, the engine is checked for leaks.

Is it safe to drive with an engine cooling system thermostat problem?

No. If it has been determined that there is a thermostat problem, it should be repaired right away. Failure to do so can cause substantial and costly damage to the engine.

When replacing the engine cooling system thermostat keep in mind:

  • Engine overheating due to causes other than a faulty thermostat, will themselves damage a thermostat. Therefore, always replace the thermostat if the engine overheats, even if the thermostat was not the initial cause of the overheating.
  • The thermostat should be replaced anytime you have major work done on the coolant system. It is convenient and costs little during such repairs and insurance against future breakdown.
  • OEM thermostats are the best ones to use and you can request your mechanic to install only the OEM thermostat. Dealer supplied, OEM thermostats are sometimes more costly but are generally higher quality and specifically engineered for your car.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Chrysler mechanics

Real customer reviews from Chrysler owners like you.

Excellent Rating

(23)

Rating Summary
21
1
0
0
1
21
1
0
0
1

Brian

19 years of experience
74 reviews
Brian
19 years of experience
Chrysler Cirrus V6-2.5L - Ignition Coil - Stockton, California
Awesome work

Patrick

12 years of experience
159 reviews
Patrick
12 years of experience
Chrysler Cirrus V6-2.5L - Car is not starting - Fountain Hills, Arizona
Very professional and detailed. Great experience!

Anderson

28 years of experience
94 reviews
Anderson
28 years of experience
Chrysler Cirrus L4-2.4L - Inspection Service - Floral Park, New York
Nice guy . Very good mechanic. Would definitely recommend

Brian

19 years of experience
74 reviews
Brian
19 years of experience
Chrysler Cirrus V6-2.5L - Car is not starting - Stockton, California
Very helpful friendly arrived on time great job

Excellent Rating

(23)

Rating Summary
21
1
0
0
1
21
1
0
0
1
Number of Chrysler Cirrus services completed
253+
services done by our mechanics
TOTAL NUMBER OF EXPERT Chrysler MECHANICS
1200+
experts on our platform

Recent articles & questions

P2455 OBD-II Trouble Code: Diesel Particulate Filter Differential Pressure Sensor Short to Voltage
P2455 P2455 code definition Diesel Particulate Filter Differential Pressure Sensor Short to Voltage What the P2455 code means P2455 is an OBD-II generic code that the engine control module (ECM) has detected the diesel particulate filter differential pressure sensor (DPFPS)...
How to Change a Radiator Valve
A radiator valve allows coolant into the radiator in order to cool off the engine once the coolant has reached a certain temperature.
How to Buy a Good Quality Seat Back Organizer
Does Does it seem like you are constantly misplacing things in the car? Do you have kids that ride in the backseat? Do their belongings seem to be scattered all over the seat and floor at all times? If you’ve...

Brakes not working

Hello. I suspect the brake system may not be building adequate pressure. First, verify all the air is out of the brake system by following the specific procedure your vehicle requires to bleed the brakes. Often times, if the specific...

It is a 320d and it doesn't start by itself in the morning unless I tow it.

Check the battery in the car. The battery may not have the amount of charge that is needed to start the diesel engine. A diesel engine requires more battery power to start it as the compression is higher than a...

My dodge nitro want accelerate at all

Hi Joseph. Thanks for contacting us today. If the acceleration issues started after replacing the sensor, then it's likely that a reprogram of the throttle body and electronic throttle control did not occur. If these issues happened prior to the...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com