Chrysler 300 Exhaust Gas Recirculation/EGR Valve Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(27)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(27)

Exhaust Gas Recirculation/EGR Valve Replacement Service

How much does a Exhaust Gas Recirculation/EGR Valve Replacement cost?

On average, the cost for a Chrysler 300 Exhaust Gas Recirculation/EGR Valve Replacement is $247 with $107 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2017 Chrysler 300V8-5.7LService typeExhaust Gas Recirculation/EGR Valve ReplacementEstimate$498.20Shop/Dealer Price$587.60 - $847.70
2006 Chrysler 300V8-6.1LService typeExhaust Gas Recirculation/EGR Valve ReplacementEstimate$619.25Shop/Dealer Price$739.40 - $1095.72
2008 Chrysler 300V6-3.5LService typeExhaust Gas Recirculation/EGR Valve ReplacementEstimate$571.01Shop/Dealer Price$665.26 - $942.18
2005 Chrysler 300V8-6.1LService typeExhaust Gas Recirculation/EGR Valve ReplacementEstimate$621.01Shop/Dealer Price$741.62 - $1099.28
2009 Chrysler 300V6-2.7LService typeExhaust Gas Recirculation/EGR Valve ReplacementEstimate$508.02Shop/Dealer Price$575.33 - $763.76
2009 Chrysler 300V8-6.1LService typeExhaust Gas Recirculation/EGR Valve ReplacementEstimate$619.25Shop/Dealer Price$739.56 - $1096.01
2007 Chrysler 300V8-5.7LService typeExhaust Gas Recirculation/EGR Valve ReplacementEstimate$602.21Shop/Dealer Price$718.14 - $1061.71
2006 Chrysler 300V6-3.5LService typeExhaust Gas Recirculation/EGR Valve ReplacementEstimate$658.60Shop/Dealer Price$753.97 - $1031.72
Show example Chrysler 300 Exhaust Gas Recirculation/EGR Valve Replacement prices

What is the Exhaust Gas Recirculation/EGR Valve all about?

The EGR (Exhaust Gas Recirculation) valve helps lower the car’s exhaust emissions (gases from the tailpipe). It recirculates the portion of the gasses coming out of the engine by putting in back into the intake manifold, where the engine can burn it again, thereby reducing the emissions.

The EGR valve is located in the engine compartment (underneath the hood). Most engines require exhaust gas recirculation to meet emissions standards. If the EGR valve has gone bad, the car will not pass emissions.

Exhaust Gas Recirculation Valve

Keep in mind:

During the EGR valve replacement, your mechanic should also inspect the vacuum hoses connected to the EGR valve. If the vacuum hoses are cracked (leaking), the EGR valve will not function properly.

How it's done:

  • Scan the computer system in the car.
  • Check all vacuum related hoses to EGR valve.
  • Test EGR transducer.
  • Verify the EGR port is not plugged.
  • Remove and replace the EGR valve.
  • Clean the carbon deposit on EGR pintle.
  • Clear the trouble codes and test for proper operation of EGR valve.

Our recommendation:

It is a good idea to get an air induction (carbon cleaning) service performed every 50,000 miles. This will clean out any sludge or carbon build up in the air intake system. Always keep up with regular oil changes; it will help prevent sludge build up in the engine.

What common symptoms indicate you may need to replace the Exhaust Gas Recirculation/EGR Valve?

  • Check Engine light is on.
  • Possible loss of power.
  • Car will not run smoothly (shake, stumble, may stall).

How important is this service?

The EGR valve helps your vehicle recycle gas. The EGR valve is responsible for taking the gas that comes out of the engine, and sending it through the intake manifold, where the engine can utilize it again. Without the EGR valve your vehicle will not recycle and reuse any of its gas, which increases the emissions. Without the EGR, your car will not pass an emission inspection.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Chrysler mechanics

Real customer reviews from Chrysler owners like you.

Excellent Rating

(27)

Rating Summary
22
1
1
0
3
22
1
1
0
3

Robert

31 years of experience
228 reviews
Robert
31 years of experience
300 2006 - Exhaust Gas Recirculation/EGR Valve - Fairburn, GA
Great. Robert was timely, knowledgeable, and very professional throughout the whole process.

Duane

20 years of experience
545 reviews
Duane
20 years of experience
300 2007 - Exhaust Gas Recirculation/EGR Valve - San Diego, CA
On time...friendly, efficient and clean. Just a wonderful experience all around. He had restored my confidence in this service

Scott

30 years of experience
950 reviews
Scott
30 years of experience
300 2006 - Exhaust Gas Recirculation/EGR Valve - Scottsdale, AZ
The mechanic did a great job's my issue was with the delay on parts but I won't fault Scott for that.

Jonathan

25 years of experience
42 reviews
Jonathan
25 years of experience
300 2010 - Alternator - Atlanta, GA
He was very knowledgeable and very patient. I would use him again. Very nice and professional.

Excellent Rating

(27)

Rating Summary
22
1
1
0
3
22
1
1
0
3
Number of Chrysler 300 Exhaust Gas Recirculation/EGR Valve Replacement services completed
297+
services done by our mechanics
TOTAL NUMBER OF EXPERT Chrysler MECHANICS
1200+
experts on our platform

Recent articles & questions

B1968 OBD-II Trouble Code: AC Water Pump Detection Circuit Failure
B1968 means the air conditioner water pump is not working properly. This is likely due to damaged electrical components in the AC system
P2001 OBD-II Trouble Code: NOx Trap Efficiency Below Threshold Bank 2
P2001 P2001 trouble code definition The P2001 diagnostic trouble code indicates that the NOx trap efficiency threshold for bank 2 is below the normal operating threshold. Related Trouble Code: P2000 OBD-II Trouble Code: [NOx Trap Efficiency Below Threshold Bank 1]...
Windshield Laws in Rhode Island
Rhode Rhode Island drivers are required to follow the traffic laws when driving on the roadways throughout the state. Additionally, the equipment in any vehicle driven on the roads must also pass inspection and be in compliance with the laws....

P1810 Pressure Manifold Fault

If you have code P1810, then this might be something wrong with the transmission control valve for the gear position sensor, or a compatibility problem between the different computers. Have a pinpoint test for the code (https://www.yourmechanic.com/services/check-engine-light-is-on-inspection) done and see...

Traction Control System light always on

Hi, thanks for writing in. Your car is equipped with wheel speed sensors at each of the four wheels which monitor wheel speed while relaying this information constantly to the ABS and traction control system which are controlled by the...

How long can you drive with a malfunction.indicator light on

Hi there. In most cases, when a error code is triggered, it indicates that there is an issue that should be inspected or repaired as soon as possible. Depending on the error code, your issue could be due to a...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com