Chevrolet K2500 Battery will not hold a charge Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(28)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(28)

Battery will not hold a charge Inspection Service

How much does a Battery will not hold a charge Inspection cost?

On average, the cost for a Chevrolet K2500 Battery will not hold a charge Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1999 Chevrolet K2500V8-5.7LService typeBattery will not hold a charge InspectionEstimate$114.99Shop/Dealer Price$124.99 - $132.49
1994 Chevrolet K2500V6-4.3LService typeBattery will not hold a charge InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
1990 Chevrolet K2500V8-5.7LService typeBattery will not hold a charge InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
1993 Chevrolet K2500V8-5.0LService typeBattery will not hold a charge InspectionEstimate$94.99Shop/Dealer Price$104.99 - $112.48
1996 Chevrolet K2500V8-6.5L Turbo DieselService typeBattery will not hold a charge InspectionEstimate$94.99Shop/Dealer Price$105.02 - $112.55
2000 Chevrolet K2500V8-7.4LService typeBattery will not hold a charge InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
1995 Chevrolet K2500V6-4.3LService typeBattery will not hold a charge InspectionEstimate$99.99Shop/Dealer Price$109.87 - $117.28
1992 Chevrolet K2500V8-7.4LService typeBattery will not hold a charge InspectionEstimate$99.99Shop/Dealer Price$110.24 - $117.94
Show example Chevrolet K2500 Battery will not hold a charge Inspection prices

Your car has a battery for a very good reason – it provides the initial power needed to crank the engine and get the car running. After that, the alternator takes over, providing the power for your accessories, as well as recharging the battery. If your battery has died and then recharged, and you’ve found that it will not hold a charge (the battery is fine for a little while, but then the charge dissipates), there’s a problem somewhere in your system that must be diagnosed and repaired.

How this system works:

In a normal system, it works like this: Your battery supplies power to the starter and the main relay. The main relay powers the fuel pump and computer. The battery also supplies the initial electric spark to the spark plugs. Once the engine is cranked, the alternator begins turning, which generates the electricity necessary to recharge the battery and to power the engine and other components.

The alternator should always provide enough electricity to recharge the battery and power your other components. If it does not, then the electricity needed comes from the battery and because it’s not being recharged, it will eventually die. Of course, automotive batteries have a limited lifespan – they should be checked regularly after they’re about three years of age (although it’s wise to have them checked at least twice a year no matter how new they might be).

If your battery won’t hold a charge, it means there are problems within the system that are either preventing the battery from being recharged, or draining the battery when the engine is off.

Common reasons for this to happen:

  • Bad Cell: Batteries will eventually die no matter what. They will develop a bad cell that prevents them from holding a charge and will need to be replaced. This is part of normal vehicle maintenance. Have your battery tested every Spring and Fall to ensure that you’re able to avoid being stranded by a failed battery. Batteries most commonly “die” during hot and cold weather.

  • Low Water: Some batteries have fill holes that allow you to maintain them, although most modern batteries are maintenance free and don’t allow you to add water. If you have a maintainable battery, topping off the water level may solve the problem.

  • Bad Alternator: If the alternator is not charging the battery while the engine operates, the battery will not hold a charge. This is most noticeable if you jump the battery and the engine runs for a while, only to eventually die. It is also observable by watching your headlights – while the engine is running, check the lights. If they start bright but slowly fade, chances are good that the problem is the alternator, not the battery.

  • Corroded Battery Cables: Battery cables and terminals can suffer from corrosion. As it builds up, this corrosion prevents solid contact, and can limit the charge being supplied to the battery from the alternator. Regular maintenance of your battery can prevent this.

  • Loose Alternator Belt: If the alternator belt is loose (old and stretched), it will not operate the alternator properly, which means that the charge the alternator produces may not be enough to recharge the battery.

  • Parasitic Drain: It might be that your battery and alternator are just fine, but there’s something else draining the charge. This could be something as simple as leaving the lights on, or having an accessory plugged in to an “always on” power outlet, or it could be a stuck relay or something else that’s pulling power from the battery when the engine isn’t running.

What to expect:

A top-rated mobile mechanic will come to your office, home or other location to inspect the battery, the alternator and other components of the charging system. The mechanic will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How it's done:

The mechanic will test your battery, alternator and starter. The mechanic will also check for parasitic drain and other problems that might make your battery not hold a charge. It may be necessary to replace your battery in order to diagnose other system-wide problems (if the battery has developed a bad cell).

How important is this service?

If your battery won’t hold a charge, it’s not safe to drive your car. Even if your alternator is working fine, turning the car off for something as simple as stopping at the gas station will mean that the engine won’t crank and you’ll need to jump it off. One of our top-rated mechanics can diagnose the problem and get you back up and running.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Chevrolet mechanics

Real customer reviews from Chevrolet owners like you.

Excellent Rating

(28)

Rating Summary
28
0
0
0
0
28
0
0
0
0

Russell

24 years of experience
356 reviews
Russell
24 years of experience
Chevrolet K2500 V8-5.7L - Car is not starting - Vancouver, Washington
Russ was very helpful, knowledgeable , and found the problem quickly.

Franky

29 years of experience
43 reviews
Franky
29 years of experience
Chevrolet K2500 V8-5.7L - Battery - Glen Ellyn, Illinois
Trying to get through the website was a bit of a challenge and almost gave up. After working with Franky my mechanic i was so glad i push through not so user friendly site. Franky was awesome!

Theodore

16 years of experience
1638 reviews
Theodore
16 years of experience
Chevrolet K2500 V8-5.7L - Car is not starting - Bellevue, Washington
Good guy , easy to work with .

Reyna

15 years of experience
39 reviews
Reyna
15 years of experience
Chevrolet K2500 V8-5.7L - Brake Pads Replacement (Front) - Alpharetta, Georgia
Reyna was prompt, professional and courteous. She did the work timely even thought it rained most of the time.

Excellent Rating

(28)

Rating Summary
28
0
0
0
0
28
0
0
0
0
Number of Chevrolet K2500 services completed
308+
services done by our mechanics
TOTAL NUMBER OF EXPERT Chevrolet MECHANICS
1600+
experts on our platform

Recent articles & questions

How to Become a Certified Mobile Vehicle Inspector (State Car Inspector Certified) in North Carolina
Automotive technician jobs include mobile vehicle inspectors. Learn how to do car checks in North Carolina through many community colleges.
P2166 OBD-II Trouble Code: Throttle/Pedal Position Sensor D Maximum Stop Performance
P2166 means there is an electrical issue with the throttle pedal position sensor circuit, possibly due to a faulty sensor or other component.
P0426 OBD-II Trouble Code: Catalyst Temperature Sensor Range/Performance (Bank 1)
P0426 means there is a problem with the bank 1 catalytic converter, and could be caused be a faulty oxygen sensor or catalytic converter.

I Had my oil changed on 5/28/16. On 5/31/16 the check engine light came on. On 6/5/16 the low oil pressure turn off engine came on

Hello, From what you describe it would not appear to me that something went wrong during your oil change. If the level is correct on the dipstick and the engine runs and sounds okay, then it is probably something else....

Temp. Gauge doesn't move

No, signal on the instrument cluster concerning the engine temperature usually points to no signal coming from the coolant temperature sensor. This can be caused by a broken wire (https://www.yourmechanic.com/services/fuse-replacement) along the circuit, loose connection, or failed temperature sensor (https://www.yourmechanic.com/services/coolant-temperature-switch-sensor-replacement)....

2006 Audi A4 Quattro won't start but I cranks over and everything else works

Hi Kayla. Thanks for contacting us tonight. In most cases, when an engine will start but dies quickly, it's caused by a fuel pump relay that is shorting in and out, a mass airflow sensor that is not working correctly,...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com