Audi Coupe Quattro Windows Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(2,394)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(2,394)

Windows Inspection Service

How much does a Windows Inspection cost?

On average, the cost for a Audi Coupe Quattro Windows Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1990 Audi Coupe QuattroL5-2.3LService typeWindows InspectionEstimate$114.99Shop/Dealer Price$132.49 - $145.62
1991 Audi Coupe QuattroL5-2.3LService typeWindows InspectionEstimate$94.99Shop/Dealer Price$112.52 - $125.67
Show example Audi Coupe Quattro Windows Inspection prices

The windows on a car keep the interior safe, warm and dry. They allow fresh air in and make it easy to order at a drive thru window. If a window gets stuck up or down it can create a very unpleasant situation for the driver and passengers.

There can be a number of different problems with vehicle windows. The issue can vary from a blown fuse to a window switch that is not working. In some cases the glass can actually fall into the door.

Regardless of the problem, it should be fixed quickly, a malfunctioning window is not only inconvenient, it can also be dangerous.

How this system works:

Power Windows

The glass sits in a part called a regulator, which is pushed up and down by a small electric motor. The motor is attached to a worm gear and a number of spur gears, which creates a gear reduction, producing enough torque to lift the window while also keeping it level. When the window button is pushed the door module closes a relay, which then provides power to the window motor. The majority of problems with a power window are caused by the electrical system but faulty gears can also be the culprit.

Manual Windows

The glass is attached to a regulator, which is the component that pushes the window up and down. The handle sticks through the door panel and when the handle is cranked it moves the regulator up or down. Manual windows are rapidly being replaced by power windows.

Common reasons for this to happen:

  • Blown Fuse: If none of the power windows are functioning there is a good chance that the problem is a blown fuse or a bad relay. While these are two separate issues, the symptoms are often very similar. A complete inspection of the fuses and electrical system will be necessary to determine where the problem is and how to repair it.

  • Burned Out Motor: if the windows are not going up or down and there is no noise coming from the door when the switch is pressed there is a good chance the electric motor is burned out or malfunctioning. The motor will have to be replaced.

  • Power Window Regulator: If the motor is running when the switch is pressed but the window does not move, the regulator is likely damaged or malfunctioning. There are a number of parts that can break on a regulator. In this situation the regulator will have to be repaired or replaced.

  • Malfunctioning Motor: If the window is still moving up and down but very slowly, the electric motor may be malfunctioning. If it is making a whining sound this can also indicate a problem. As the motor ages it will wear out and eventually it will have to be replaced.

  • Broken Window Tracks: There are window track guides, which hold the window in place as it goes up and down. If the track guides are damaged it can cause problems with the window going up and down. Common symptoms include a slow moving window, and a rattling or grinding noise. Eventually, the window may fall inside the door.

  • Worn Window Switch: The power window switch gets used a lot and eventually it can wear out which will prevent power from going to the window. If this happens the window can end up stuck in the up or down position.

  • Bad Wiring: Wiring is integral to the operation of the power windows and if there is a short, a faulty switch or a malfunctioning relay it can bring the whole system to a halt. A professional should deal with wiring issues.

  • Broken Regulator Manual Window: If the window is starting to tilt sideways, the most likely cause is a broken regulator. The wheels on the end of a regulator will often break off which will cause the glass to tilt sideways, and eventually fall into the door.

What to expect:

A top-­rated mobile mechanic will come to your home or office to determine the source and cause of the window issue, and will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How important is this service?

A malfunctioning window is certainly not a life threatening situation but it can lead to interior damage and unsafe situations if the window is stuck in the down position. The flip side of that coin is a window stuck in the up position which can make it impossible to order at a drive-thru or use the window as an escape exit in the event of an emergency.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Audi mechanics

Real customer reviews from Audi owners like you.

Excellent Rating

(2,394)

Rating Summary
2,221
85
19
12
57
2,221
85
19
12
57

Ben

41 years of experience
1416 reviews
Ben
41 years of experience
Audi A4 L4-1.8L Turbo - Windows - Houston, Texas
I was extremely pleased with the efficency and quality of work with Ben. This is so refreshing to encounter a technician with this skill level and experience. In addition Ben has a very nice personality. On a scale of 1 to 10 I would rate him a 10. The cost of the repair was more than fair and that had a lot to do with his experience and efficiency.

Ben

41 years of experience
1416 reviews
Ben
41 years of experience
Audi Q7 V6-3.6L - Brake Pads Replacement (Front, Rear) - Houston, Texas
Ben is excellent mechanic

Chris

22 years of experience
2229 reviews
Chris
22 years of experience
Audi A4 Quattro L4-2.0L Turbo - Pre-purchase Car Inspection - Laguna Niguel, California
Chris is the man. I've used him plenty of times and he's always up front and honest and gives you the "real" explanation not some horror story. He also doesn't sugar coat the info either. It's refreshing to deal with a professional who knows what they are talking about.

Rigoberto

11 years of experience
739 reviews
Rigoberto
11 years of experience
Audi A4 Quattro L4-2.0L Turbo - Ally Pre-purchase Car Inspection - Hoffman Estates, Illinois
Rigoberto was very professional with the inspection and appeared to be very reliable.

Excellent Rating

(2,394)

Rating Summary
2,221
85
19
12
57
2,221
85
19
12
57
Number of Audi services completed
26334+
services done by our mechanics
TOTAL NUMBER OF EXPERT Audi MECHANICS
700+
experts on our platform

Recent articles & questions

How Do Hoses Near the Engine Avoid Melting from the Heat?
Hoses Hoses play a vital role in your engine, allowing fluids like coolant, power steering fluid, and brake fluid to flow where they’re needed and then return. Most of the engine hoses are made from specially formulated rubber, designed to...
How to Obtain an A9 ASE Study Guide and Practice Test
Automotive technician jobs pay more if you’re ASE certified. Get the study guide & practice test for A9 Light Vehicle Diesel Engines Repair.
P0522 OBD-II Trouble Code: Engine Oil Pressure Sensor/Switch Low Voltage
P0522 code means the sensor is indicating too low of an oil pressure value due to faulty sensor, low oil, or sensor circuit.

There was too much oil put in my car it got drove about mile maybe before sucked back out it is smoking a lot how long will it con

The 2012 is sensitive about how much oil is in the engine. If it has been overfilled, you probably have oil in the exhaust system and the crankcase vent system. The first thing you need to do is make sure...

How do I install a high pressure power steering line I can't get it to twist and screw into the rack

The double flare end of the tube should be fully inserted until the flare mates with the convex sealing surface. The tube nut should then smoothly thread all the way down by hand. If the tube nut does not start...

Ok, with my toyota tacoma in 5th gear , doin 70 might per hr the remaining is reading 3000

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com