Audi 100 Car Battery Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(161)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(161)

Car Battery Replacement Service

How much does a Car Battery Replacement cost?

On average, the cost for a Audi 100 Car Battery Replacement is $237 with $142 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1991 Audi 100L5-2.3LService typeCar Battery ReplacementEstimate$398.15Shop/Dealer Price$486.44 - $711.94
1994 Audi 100V6-2.8LService typeCar Battery ReplacementEstimate$378.15Shop/Dealer Price$466.47 - $691.99
1989 Audi 100L5-2.3LService typeCar Battery ReplacementEstimate$378.15Shop/Dealer Price$466.47 - $691.99
1993 Audi 100V6-2.8LService typeCar Battery ReplacementEstimate$378.15Shop/Dealer Price$466.43 - $691.92
1990 Audi 100L5-2.3LService typeCar Battery ReplacementEstimate$378.15Shop/Dealer Price$466.50 - $692.04
1992 Audi 100V6-2.8LService typeCar Battery ReplacementEstimate$378.15Shop/Dealer Price$466.47 - $691.99
Show example Audi 100 Car Battery Replacement prices

What are car batteries and how do they work?

A car battery is an energy storage device that relies on a chemical reaction within the battery to produce electricity. The stored electrical energy is used to initially operate the starter motor, ignition system, and fuel system on your vehicle. Once your car engine is running, the alternator supplies the electricity needed for all vehicle systems and charges the battery to replace the electric energy used when starting a car.

Most electric vehicles have a traction battery which is in addition to the standard 12 volt battery that is used to start the car engine. Traction batteries also convert chemical energy to supply electrical energy but operate at higher voltages and often are monitored by the PCM (Powertrain Control Module).

Battery

When to replace a car battery?

  • Your car doesn’t start. A new battery has a specified capacity to provide power. This capacity is referred to as the cranking amps rating of the battery. As a battery ages, the actual amps that a battery can supply becomes lower than its original rating Once the cranking amps fall below a critical threshold, it will be difficult or impossible to start your car.
  • Battery or charging system warning light is illuminated. Should a battery or charging system warning light illuminate, a mechanic should perform a few basic tests to determine if a battery replacement is needed.
  • Electrical components don’t work. Once a battery has started to fail, and the voltage produced by the battery drops, then vehicle electrical components can malfunction, such as the security system. If you are experiencing electrical malfunctions, it’s a smart idea to have the battery tested.

How do mechanics replace the battery?

  • A temporary power source might be installed to avoid the possibility of losing radio presets or stored data in the PCM while the battery is out. When the battery is already completely dead, this step is unnecessary.
  • The vehicle’s negative cable is removed from the battery, followed by the positive cable. The battery tie down system is loosened and the old battery removed.
  • Cable ends and wiring are carefully inspected to ensure cleanliness and no corrosion. In some cases, corrosion can be extreme and the cable may need to be replaced or wiring repaired.
  • The new battery is installed and the tie down system is reinstalled. Anti-corrosion compound is applied to the battery terminals. The positive terminal is reconnected followed by the negative terminal.
  • Some vehicles, for example some models of BMW, VW, and Audi, may require PCM programming to input battery parameters. This step, performed using a specialized scan tool, is necessary to maximize battery life and prevent electrical system malfunctions.
  • The car is started and charging system output is measured and compared against the factory OEM specification to ensure that the new battery will properly recharge. Generally, charging output will be in the range of 13.8 to 14.8 volts but the exact specifications vary by make and model.

Is it safe to drive with a battery problem?

Yes, but if you have a weak battery you might be left stranded somewhere if the battery dies completely and you cannot start your car. A faulty battery may also needlessly overload the alternator and could adversely affect the operation of the vehicle’s electrical system, including the vehicle security system and the shift interlock.

When replacing the battery keep in mind:

  • The quality of the electrical connections to the battery posts is important. Connections must be clean, free of corrosion and properly tightened.
  • Batteries store a large amount of energy and if short-circuited a battery could explode and can create intense discharges that can damage your eyesight. Insulated tools should be used to attach cabling to battery terminals. Otherwise, the battery’s positive cable can be shorted to ground or the positive and negative posts can be directly shorted. Batteries can only be safely installed from a positive terminal to positive wiring and from a negative terminal to body ground. If the polarity is reversed damage will likely occur to the vehicle’s electrical system.
  • Generally, a car battery will have a service life of 4 to 7 years. If a load test on a battery reveals a significant reduction in the capacity of the battery to provide power, you should buy a new battery rather than wait for the old battery to fail completely.
  • Batteries should only be disconnected if the engine is off and the alternator is not running. Disconnecting a car battery while the alternator is running can cause a voltage spike that will damage sensitive electronic components in the vehicle, such as the PCM.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Audi mechanics

Real customer reviews from Audi owners like you.

Excellent Rating

(161)

Rating Summary
150
5
3
1
2
150
5
3
1
2

Frank

8 years of experience
130 reviews
Frank
8 years of experience
Audi 100 V6-2.8L - Pre-purchase Car Inspection - Chicago, Illinois
Frank was great - kept me informed and performed a solid inspection of a vintage car that I was purchasing 800 miles from home.

Bereketeab

7 years of experience
110 reviews
Bereketeab
7 years of experience
Audi 100 V6-2.8L - Spark Plugs - Sacramento, California
Goes above and beyond, helped save my coil pack when a plug wire was stuck in it. He didn't give up and got it out and finished the job.

Leo

5 years of experience
8 reviews
Leo
5 years of experience
Audi A3 L4-1.8L Turbo - Battery - Glendale, California
Very professional. Thanks for your service!

Eric

15 years of experience
133 reviews
Eric
15 years of experience
Audi A4 Quattro L4-2.0L Turbo - Battery - Washington, District of Columbia
Battery replacement. Eric showed up on time, was courteous, and efficient.

Excellent Rating

(161)

Rating Summary
150
5
3
1
2
150
5
3
1
2
Number of Audi Car Battery Replacement services completed
1771+
services done by our mechanics
TOTAL NUMBER OF EXPERT Audi MECHANICS
700+
experts on our platform

Recent articles & questions

How a Manual Transmission Works
A A manual transmission helps a vehicle achieve a desired speed through the use of gears, a clutch, and a shifter. It works like this: when the driver wants to shift gears, he or she pushes in the clutch pedal...
A Buyer’s Guide to the 2011 Ford Ranger
The The 2011 Ford Ranger offers affordable pricing with excellent styling. It is a compact pickup that is both inexpensive to operate and own. The vehicle is capable of going off-road while still being able to tow 1,600 to 3,100...
How to Replace Hood Support Struts
The hood struts, or lift support, support your vehicle's hood while you access the engine compartment. A failed strut is a safety concern.

Can I change my car oil from 5w-20 to 10w-20 because the oil is burning quicker?

The effect on oil consumption will be zero to negligible (these are both SAE 20 weight oils at operating temperature) and, in any event, any beneficial effect will be offset by the reduction in the efficiency of operation of the...

What kind of tranny fluid do I need?

I would suggest consulting your owner's manual to be sure, however you should be able to use Dexron VI. If you need additional help with this, please contact YourMechanic to schedule an appointment to have one of our experts come...

Yes I need to talk to some about a problem I’m haveing with a dodge journe journey

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com