Acura ZDX Loud noise is coming from rear brakes Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(2)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(2)

Loud noise is coming from rear brakes Inspection Service

How much does a Loud noise is coming from rear brakes Inspection cost?

On average, the cost for a Acura ZDX Loud noise is coming from rear brakes Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2012 Acura ZDXV6-3.7LService typeLoud noise is coming from rear brakes InspectionEstimate$114.99Shop/Dealer Price$132.49 - $145.62
2011 Acura ZDXV6-3.7LService typeLoud noise is coming from rear brakes InspectionEstimate$94.99Shop/Dealer Price$112.52 - $125.67
2010 Acura ZDXV6-3.7LService typeLoud noise is coming from rear brakes InspectionEstimate$94.99Shop/Dealer Price$112.52 - $125.67
2013 Acura ZDXV6-3.7LService typeLoud noise is coming from rear brakes InspectionEstimate$94.99Shop/Dealer Price$112.48 - $125.60
Show example Acura ZDX Loud noise is coming from rear brakes Inspection prices

Depending on the make and model you drive, you might have disc brakes on the front and drum brakes on the rear, or you could have four-wheel disc brakes. These are becoming more and more common today. However, regardless of the configuration, you should not have a loud noise coming from the rear brakes. This indicates that something has gone wrong, and there are several potential culprits.

How this system works:

Your rear brakes work similar to the front brakes. The master cylinder sends pressurized fluid through the brake lines. If you have rear drum brakes, the fluid causes the actuator to push the brake shoes outward, where they press against the inside of the drum. In the case of rear disc brakes, the fluid activates the caliper, which then squeezes the caliper between two brake pads.

This is identical to how your front brakes operate, but the pads are generally smaller than those used on the front. This is because most of the stopping power in your car is generated in the front.

However, your rear brakes are just as important as the front, and if you’re noticing a loud noise from the rear during braking, it could be a number of different things, depending on the type of noise and when it occurs.

Common reasons for this to happen:

  • Worn Brake Pads: Obviously, the most common potential problem here is worn out rear pads (or shoes if you have drum brakes). If you notice a loud grinding sound, it could be the metal backing plate from the pads making contact with the rotor.

  • Broken or Missing Caliper Bolt: Your calipers are essentially two halves held together with bolts (not the slide pins). If one of the bolts is missing or broken, it’s possible that part of the caliper has popped out and is making contact with your wheel.

  • Contact with the Squealer: Squealers are metal tabs designed to lightly contact the rotor and create a noise that warns you the pads are wearing down. If your pads are nearing the end of their life, it’s possible this is the noise you’re hearing.

  • Parking Brake Shoes Stuck: Your parking brake is located in the rear of the car. In a disc brake setup, there are shoes located inside the inner drum built into the rotor. If the shoes are stuck, it’s possible that the sound you’re hearing is them contacting metal while you’re driving.

  • Wheel Bearing Failure: If the noise you’re hearing is a “howl” and it’s constant, the first thing to suspect would be one of the wheel bearings (whichever side is the loudest while you’re driving).

  • Pads Settling into Place: If the sound you’re hearing is more of a “pop” or a loud click, it might be nothing more than your brake pads being slightly worn and settling into place when you push the brake pedal.

  • Normal Pad Vibration: If you only hear the noise when you’re backing up, it’s possible that it is just a normal vibration caused by the friction material of the pad lightly contacting the rotor’s surface. This is called “resonant frequency”, and can occur with both disc and drum brakes.

What to expect:

A top-rated mobile mechanic will come to your home or office and will inspect your rear brakes. This inspection will include the drums and shoes or the rotors and calipers. It should also include the brake lines and other components. The mechanic will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How it's done:

The mechanic will inspect your rear brake pads, the rotors, calipers, and the brake lines. It may be necessary to remove one or both rear wheels for a visual inspection. It may also be necessary to test drive the vehicle if the source of the problem is not immediately apparent in order for the mechanic to verify any and all noises.

How important is this service?

The mechanic will visually inspect the rear brakes, as well as other components that might be causing the noise you’re experiencing. It might be necessary for the mechanic to test drive the vehicle in order to duplicate the noise and better diagnose the problem.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Acura mechanics

Real customer reviews from Acura owners like you.

Excellent Rating

(2)

Rating Summary
2
0
0
0
0
2
0
0
0
0

Chris

18 years of experience
494 reviews
Chris
18 years of experience
Acura ZDX V6-3.7L - compressor discharge hose - Houston, Texas
Mr. Chris G. arrived on time and performed the work efficiently. Recommended...

Matthew

33 years of experience
1229 reviews
Matthew
33 years of experience
Acura ZDX V6-3.7L - Timing Belt - Toano, Virginia
Very much professional.. Explained the task at hand. Showed the old parts taken away. in the future will work with you guys real soon and would like Matt to return for the requested service. And I m glad I found you guys on line..

Ben

41 years of experience
1421 reviews
Ben
41 years of experience
Acura ZDX V6-3.7L - Timing Belt - Cypress, Texas
Mr. Ben is extremely personable, patient and knowledgeable. I had a great experience. I was curious and he was very patient to explain every step, and also got the work done on time. I will definitely recommend him for any automotive needs.

Patrick

32 years of experience
369 reviews
Patrick
32 years of experience
Acura TL V6-3.2L - Loud noise is coming from rear brakes - Las Vegas, Nevada
I've seen Patrick before and as always he was at the top of his game!

Excellent Rating

(2)

Rating Summary
2
0
0
0
0
2
0
0
0
0
Number of Acura Loud noise is coming from rear brakes Inspection services completed
22+
services done by our mechanics
TOTAL NUMBER OF EXPERT Acura MECHANICS
1000+
experts on our platform

Recent articles & questions

How to Buy a Good Quality Steering Wheel Lock
If If security is something that you worry about where your car is concerned, then you've probably considered a steering wheel lock. These can be used to prevent someone from stealing your car, because even if they manage to break...
How to Stop on a Slippery Road Without Anti-Lock Brakes (ABS)
Slippery road conditions can make it hard to avoid obstacles, especially without ABS brakes. Keep control of your vehicle to avoid unexpected objects.
How Much Does a Mechanic Make in Kentucky?
Automotive technician jobs in Kentucky have an mean salary of $35k, with some mechanics earning as much as $40k.

car tries to start but wont turn over all the way

If I'm understanding you correctly, it sounds like your engine is not turning fast enough or starting up. The slow cranking can be due to a defective starter (https://www.yourmechanic.com/services/starter-replacement), bad cables or connections to the battery (https://www.yourmechanic.com/services/battery-cable-replacement), or a bad...

P0012 and P0299. Can't get power when I accelerate and rpms goes high when the gears kick in.

Hello and thanks for contacting Your Mechanic. The code P0012 (https://www.yourmechanic.com/article/p0012-obd-ii-trouble-code-camshaft-position-a-timing-over-retarded-bank-1-by-jay-safford) means that the camshaft timing sensor is reading the camshaft is retarded. The code P0299 (https://www.yourmechanic.com/article/p0299-obd-ii-trouble-code-turbo-supercharger-underboost-condition-by-spencer-clayton) means that the turbo has excessive low output. Your turbo will not spool...

Replaced master/slave cylinder and clutch pedal is hard as a rock and won't depress what could it be?

You need to open the bleeder on the slave cylinder to see if the clutch can be pressed down? If it still cannot be pushed down then the problem is in the clutch master cylinder and it is binding. If...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com