Showing articles & questions for topic
P2008

The gap between the 6K and the 7K line is considered the red zone. This zone is marked as the over-revving speed for the engine as the valves cannot shut any faster and the timing chain creates too much slack...

Wow! Very disturbing issues to experience, especially the electrical smoke with your family in the vehicle. Based on what you've told me about you 2998 BMW 740i, this is not going to be a quick one to diagnose and repair....

While I agree that this is all probably built into the programming of the transmission computer, after looking at the Mazda service information, I see no TSB's that states Mazda has any updates available in transmission programming to address any...

Check the Steering Lock Module for faults. This component is tied into the vehicle security system (including your ignition key), and appears to have either failed or is not sync'ing correctly with the key and security system. A professional mechanic,...

Hello. If you want to submit a complaint about this then you would need to send it to Chrysler of North America (http://www.fcanorthamerica.com/Pages/Home.aspx). You can call any dealer to get their number and mailing address. More than likely you will...

Normally, the noise you are describing is commonly seen with failed outer tie rods (https://www.yourmechanic.com/article/symptoms-of-a-bad-or-failing-tie-rod-end), failed CV axles (https://www.yourmechanic.com/article/symptoms-of-a-bad-or-failing-axle-cv-shaft-assembly), broken sway bar bushings (https://www.yourmechanic.com/services/stabilizer-bar-bushings-replacement) and the steering linkage itself. With the modification of the vehicle, it can change the operation...