Volvo V40 Transfer case fluid is dirty Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(24)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(24)

Transfer case fluid is dirty Inspection Service

How much does a Transfer case fluid is dirty Inspection cost?

On average, the cost for a Volvo V40 Transfer case fluid is dirty Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2004 Volvo V40L4-1.9L TurboService typeTransfer case fluid is dirty InspectionEstimate$114.99Shop/Dealer Price$124.99 - $132.49
2000 Volvo V40L4-1.9L TurboService typeTransfer case fluid is dirty InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2001 Volvo V40L4-1.9L TurboService typeTransfer case fluid is dirty InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2003 Volvo V40L4-1.9L TurboService typeTransfer case fluid is dirty InspectionEstimate$94.99Shop/Dealer Price$104.99 - $112.48
2002 Volvo V40L4-1.9L TurboService typeTransfer case fluid is dirty InspectionEstimate$94.99Shop/Dealer Price$105.02 - $112.55
Show example Volvo V40 Transfer case fluid is dirty Inspection prices

A transfer case is unique to all-wheel drive and four-wheel drive vehicles, sending power from the engine to the rear wheels. The transfer case is a sealed unit and may be either gear-driven or chain-driven depending on the manufacturer. Because the transfer case is a sealed unit, it requires lubrication to keep all of the moving parts clean and at a reasonable temperature. Transfer case fluid ensures the longevity of parts in the transfer case.

How this system works:

In four-wheel drive and all-wheel drive vehicles, a transfer case is either connected directly to the back of the transmission, or by a small driveshaft further back in the vehicle. When activated, the transfer case takes power from the engine to the back wheels. Depending on the kind of vehicle, power may go to the rear wheels on a full-time or part-time basis. All-wheel drive systems are typically on all of the time while a four-wheel drive system are activated by either pressing a button in the vehicle or by manipulating a selector lever, typically located near the transmission hump on the floor. In both systems, transfer case fluid keeps the internal parts of the transfer case lubricated. Over time, transfer case fluid will become dirty and break down. When transfer case fluid breaks down you may notice shuddering from the vehicle while turning or a whining noise from the gears in the transfer case.

Common reasons for this to happen:

  • Time: Over time, transfer case fluid will break down and become dirty. Dirty transfer case fluid may cause moving parts in the transfer case to have more difficulty moving, which may cause them to fail.

  • Improper Filling: If the transfer case is not properly filled with transfer case fluid, it may break down more quickly, have difficulty dissipating heat, and keeping parts lubricated.

What to expect:

A top-rated mobile mechanic will come to your home or office and determine whether or not your transfer case fluid needs to be replaced. If it does, he or she will then provide a detailed inspection report outlining the reason the fluid needed to be replaced and the cost of any repairs that may need to be made.

How it's done:

A mechanic will first have your vehicle idle for a few minutes to warm the fluid as warm fluid will drain easier. The mechanic will then drain the old transfer case fluid through the drain plug. The drain plug on most transfer cases is magnetic and picks up metal shavings that otherwise might potentially damage components in the transfer case. The mechanic should clean the drain plug before replacing it. The mechanic will then remove the fill plug and add new fluid. The mechanic should also double-check the amount of fluid, he or she puts in the transfer case, ensuring that it was done properly. A vehicle that is under-lubricated may not dissipate heat or protect critical components as well as a vehicle that is properly lubricated. When the transfer case is full, the mechanic will replace the fill plug and check for any leaks.

How important is this service?

By choosing to not replace your transfer case fluid, you may compromise critical and expensive components inside the transfer case. Because the transfer case is a sealed unit, it is very important that the transfer fluid is filled properly so that heat is appropriately dissipated and components to not suffer from unneeded friction. Repairing a differential can be very expensive, so in order to preserve these components, you should have you transfer case fluid replaced at the correct intervals. Doing so could potentially save you a lot of money down the road.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Volvo mechanics

Real customer reviews from Volvo owners like you.

Excellent Rating

(24)

Rating Summary
21
2
0
0
1
21
2
0
0
1

Peter

36 years of experience
346 reviews
Peter
36 years of experience
Volvo V40 L4-1.9L Turbo - Check Engine Light is on - San Diego, California
First time using this service. Peter showed up on a timely manner and work on my car while I watched. He was very friendly and professional.

Harish

27 years of experience
588 reviews
Harish
27 years of experience
Volvo V40 L4-1.9L Turbo - Wheel Stud Replacement (Driver Side Front) - Charlotte, North Carolina
Harish was on time and got the job done very quickly. Extremely friendly and even did a little extra for us. Will definitely be booking Mr Patel for future work!

Eugenio

26 years of experience
133 reviews
Eugenio
26 years of experience
Volvo V40 L4-1.9L Turbo - Brake Hose Replacement (Driver Side Front, Passenger Side Front, Driver Side Rear, Passenger Side Rear) - Falls Church, Virginia

Chris

22 years of experience
2258 reviews
Chris
22 years of experience
Volvo V40 L4-1.9L Turbo - Check Engine Light is on - Irvine, California
My daughter was very happy with the service provided by Chris.

Excellent Rating

(24)

Rating Summary
21
2
0
0
1
21
2
0
0
1
Number of Volvo V40 services completed
264+
services done by our mechanics
TOTAL NUMBER OF EXPERT Volvo MECHANICS
600+
experts on our platform

Recent articles & questions

How Long Do Brake Shoes (Rear) Last?
Most Most of the older cars on the market have two different types of brake systems on the front and rear of them. Generally, the front brakes will be pads and rotors, while the back will be drums and shoes....
P0300 OBD-II Trouble Code: Random/Multiple Cylinder Misfire Detected
P0300 code definition Random/multiple cylinder misfire detected What the P0300 code means Most vehicles will have 4-6 cylinders. Each cylinder will fire...
3 Reasons Your Car Smells like Rotten Eggs
A sulfuric or rotten eggs smell indicates an excess of byproducts left over from failed combustion. Removing the smell requires part replacement.

Speedometer is cutting off while driving then the car begins jerking

Hi there, thanks for writing in. It sounds like the vehicle transmission speed sensor may be going bad, or the connector is damaged. Have the sensor and connector checked, and replace the sensor (https://www.yourmechanic.com/services/speed-sensor-replacement) if the connector is okay. If...

Po420 bank1

Hello Tom. P0420 (https://www.yourmechanic.com/services/check-engine-light-is-on-inspection) is the Catalyst System Efficiency Below Threshold (Bank 1) code. While there are a multitude of components that can cause this code, the general concept is that your catalytic converter is not working properly. If you...

I have a 2011 GMC Terrain, it burns oil. Last week it was running rough, idoling rough, and wanting to die when I would let it idol too long without giving it any gas, and after driving it to work the check [engine](/topics-engine-chevy/) light came on. I read a lot of things on the subject online and everyone recommended NO SMOKE STOP LEAK, I went to autozone and got the codes checked, it said it was a random misfire, I added two quarts of oil and a little bit of the no smoke and it ran perfectly, it was like new. That was last Tuesday. Today it was running kind of weird on the way to work, when it was in first gear and I would give it gas, it would bog down and drop RPM and i would release the gas and then it would drive into second gear and work its way up and would run fine after the first gear transfer. I get to work and it dies when I pull into my parking spot before I can put it into park. I turn it back on and the check engine light is flashing and the stabilitrak light is flashing and its shaking violently. I shut it off and check the oil, there is no oil on the dipstick, I add two quarts because thats all I had on me, and i add another thick drop of the no smoke stop leak into the oil, and turn it back on and its still flashing check engine light and service stabilitrak and its very shaky still. I took it to a mechanic down the street from where I work but have not heard anything back from then yet. What are your thoughts?

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com