Volvo 740 Power Steering Pressure Hose Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(17)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(17)

Power Steering Pressure Hose Replacement Service

How much does a Power Steering Pressure Hose Replacement cost?

On average, the cost for a Volvo 740 Power Steering Pressure Hose Replacement is $299 with $159 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1991 Volvo 740L4-2.3L TurboService typePower Steering Pressure Hose ReplacementEstimate$706.58Shop/Dealer Price$848.08 - $1264.46
1991 Volvo 740L4-2.3LService typePower Steering Pressure Hose ReplacementEstimate$697.57Shop/Dealer Price$837.30 - $1252.36
1992 Volvo 740L4-2.3LService typePower Steering Pressure Hose ReplacementEstimate$697.57Shop/Dealer Price$837.32 - $1252.40
1992 Volvo 740L4-2.3L TurboService typePower Steering Pressure Hose ReplacementEstimate$697.57Shop/Dealer Price$837.32 - $1252.40
1990 Volvo 740L4-2.3LService typePower Steering Pressure Hose ReplacementEstimate$697.57Shop/Dealer Price$838.80 - $1254.98
1990 Volvo 740L4-2.3L TurboService typePower Steering Pressure Hose ReplacementEstimate$697.57Shop/Dealer Price$837.46 - $1252.65
Show example Volvo 740 Power Steering Pressure Hose Replacement prices

What is the power steering pressure hose and how does it work?

The power steering pressure hose transfers the high-pressure hydraulic output of the power steering pump to either a steering gear box or steering rack and pinion unit to create the power assist that you rely on when you turn the steering wheel. The pressure hose is only used in cars with a power steering pump and reservoir, so if you have a newer car you may have electric power steering instead. The pressure hose is relatively large in diameter in order to withstand high hydraulic pressure, flex as the engine moves and vibrates, and also withstand engine heat, accidental cuts, and abrasion.

When to the consider replacing the power steering pressure hose:

  • Groaning, whirring noise or difficulty steering. Noise, or difficulty turning the steering wheel, may reflect a low power steering fluid level, which could be due to a leak in a pressure hose, or a leak elsewhere in the power steering system. Although a leak in the pressure hose is a possible cause of a low fluid level, a mechanic will consider all other possible causes, too.
  • Visible fluid leaks. There are usually steel ferrules clamped onto each end of the rubber pressure hose. These ferrules are common leak points. If there is seepage from these ferrules, the pressure hose should be replaced.
  • Hose damage. If the hose has significant physical damage, such as cuts, abrasions, cracks, or heat damage, the hose should be replaced to avoid sudden hose failure.
  • Contaminated fluid. If rubber particles are found in the power steering fluid or reservoir, it means the interior of either the pressure hose or the return hose is deteriorating. All rubber hoses should be replaced and the system flushed. An in-line, aftermarket fluid filter might be required.
  • Hose age. Both the pressure and return hoses are rubber-based products with a limited service life. If the vehicle is more than 10 years old, and power steering components are being replaced, all the rubber hoses should be replaced during that service.

How do mechanics replace the power steering pressure hose?

The underhood routing of the power steering pressure hose varies greatly between car models. The repair procedure ranges from simple to quite involved. The basic steps are:

  • Raise car as needed and support with steel safety stands.
  • Unthread the pressure hose tube nuts, or banjo-style bolts, at each end of the pressure hose.
  • Remove pressure hose and inspect interior hose lining for separation, if visible.
  • Install a new hose, using a new sealing washer or O-ring seals as applicable, and paying particular attention to the required original equipment manufacturer’s (OEM) torque value for the tube nuts or banjo bolts. Replace rubber return hose, if required, and with the authorization of the customer.
  • Once the system is fully sealed again, bleed or flush power steering system as required to remove all air and contaminants.
  • Finally, the engine is run, the car is test driven, and leaks are checked for at all connections.

Is it safe to drive with a power steering pressure hose problem?

No. The fluid in the power steering pressure hose is under very high pressure and flammable. A leak that sprays fluid into a hot engine part, such as the exhaust manifold, can cause a fire. Leaks that cause significant fluid loss can cause difficulty in steering and, if a leak causes the fluid level in the reservoir to drop too low, it can cause damage to the power steering pump too, necessitating the installation of not only a new hose but a new pump.

When replacing the power steering pressure hose keep in mind:

  • When the power steering hoses are replaced, the entire power steering system should be inspected.
  • Use only OEM specified power steering fluid in your power steering system.
  • If the pressure hose has deteriorated from the inside, the rubber return hose should be replaced as well and the system should be flushed. A mechanic might recommend the installation of an in-line filter to capture all debris.
  • Tube nuts and banjo bolts used to seal pressure hoses have OEM-specified torque values. Mechanics will use a calibrated torque wrench to tighten the connections.
  • Complete removal of air from the system can occasionally take some time, even after the normal bleeding procedure. During this time some mild noise may be heard when turning the steering wheel. If it persists more than a day or so, the system should be rechecked.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Volvo mechanics

Real customer reviews from Volvo owners like you.

Excellent Rating

(17)

Rating Summary
16
0
0
0
1
16
0
0
0
1

Jamie

23 years of experience
132 reviews
Jamie
23 years of experience
Volvo 740 L4-2.3L - Water Pump Replacement - Loma Linda, California
Jamie is a very professional mechanic, who perform the work very detailed and carefully.

Dwight

33 years of experience
58 reviews
Dwight
33 years of experience
Volvo 740 L4-2.3L Turbo - Starter - Alpharetta, Georgia
Dwight was very professional, friendly and knowledgeable.

Napoleon

28 years of experience
147 reviews
Napoleon
28 years of experience
Volvo 740 L4-2.3L Turbo - Tune-up - Northridge, California
Excelent

Charles

27 years of experience
134 reviews
Charles
27 years of experience
Volvo 740 L4-2.3L - Car is not starting - Seattle, Washington
My car was dead and Charles brought it to life. Very happy with the results.

Excellent Rating

(17)

Rating Summary
16
0
0
0
1
16
0
0
0
1
Number of Volvo 740 services completed
187+
services done by our mechanics
TOTAL NUMBER OF EXPERT Volvo MECHANICS
600+
experts on our platform

Recent articles & questions

How to Drive a Toyota Prius
For For someone who has never driven a Prius, it may feel a bit like stepping into the cockpit of an alien spaceship when sliding into the driver’s seat. That’s because the Toyota Prius is a hybrid electric car and...
How to Maintain and Protect Your Tires
Car tires are important to staying safe on the road. Check your tire pressure or if there is any dry rot or cracking to make your tires last longer.
The Mechanics of Cars: Simple Machines in Automobiles
Simple Simple machines are single, mechanical devices that help improve the daily life of humans by allowing them to work faster, easier, and more efficiently. Simple machines are considered to be the basic mechanisms that all complex machines...

Clutch noise

Without being able to hear the noise it will be hard to suggest a cause and repair. A common issue is the dust cover on the transmission. The noise will sound like a rattling and then go away once the...

Car stopped after rough idle

This is a common symptom of a faulty idle air control module. This module regulates the control of air being mixed with fuel at idle. When this is faulty, it will cause an imbalanced amount of air and fuel to...

New battery and starter but my 2001 Nissan Xterra still will not start what could be the problem

Hi there. Typically when you hear a click sound when you turn the key, and the battery and starter are new, it's due to a faulty ignition or starter relay. I would check both relays and also fuses first, as...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com