Volvo 240 ECM-Power Relay Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(19)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(19)

ECM-Power Relay Replacement Service

How much does a ECM-Power Relay Replacement cost?

On average, the cost for a Volvo 240 ECM-Power Relay Replacement is $126 with $31 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1993 Volvo 240L4-2.3LService typeECM-Power Relay ReplacementEstimate$176.15Shop/Dealer Price$201.44 - $254.81
1990 Volvo 240L4-2.3LService typeECM-Power Relay ReplacementEstimate$156.15Shop/Dealer Price$181.46 - $234.84
1991 Volvo 240L4-2.3LService typeECM-Power Relay ReplacementEstimate$156.15Shop/Dealer Price$181.46 - $234.84
1992 Volvo 240L4-2.3LService typeECM-Power Relay ReplacementEstimate$156.15Shop/Dealer Price$181.44 - $234.80
Show example Volvo 240 ECM-Power Relay Replacement prices

What is the ECM-Power Relay all about?

Vehicle development has evolved over the past several decades to a point where it seems every vehicle function is controlled by a computer, right down to the engine itself. This is actually the case for the engine and its related functions as it is controlled by the engine control module, or ECM. The ECM monitors and adjusts operation and power distribution to the fuel supply and injection systems, engine timing, exhaust gas recirculation, emissions, ignition system, and several other systems. In order to dispense power to operate these other systems, the engine control module requires power itself.

The power distribution center, or fuse block, located under the hood houses most or all of the vehicle’s fuses and relays. It contains a relay for the ECM that is powered up when the ignition key is turned to the on position. This ECM power relay acts as a switch that supplies power to the ECM. When the ignition is turned off, power switches inside the ECM relay and it no longer receives battery power. If the ECM power relay stops switching as it should, you will experience vehicle problems. When the relay is stuck open, no power will be delivered to the engine control module and the vehicle won’t start. If the relay is stuck closed, constant power will be sent to the ECM even with the engine turned off and the battery will drain.

Keep in mind:

  • The battery should be disconnected any time the electrical system is being serviced.
  • There are several problems which can cause your vehicle not to start, with the ECM power relay being one of them. Have the problem diagnosed by one of our expert technicians.

How it's done:

  • The ECM-power relay is verified that it needs to be replaced. The relay is located in the engine main fuse relay control box.

  • The defective ECM-power relay is removed from the control box by pulling it straight up and out of socket.

  • The new ECM-power relay is installed into the socket and the engine scanned for codes.

  • The engine is started and the ECM-power relay is tested for proper operation.

  • The vehicle is road tested for proper operation of the ECM-power relay and is then checked for codes.

Our recommendation:

The ECM power relay should last the lifetime of your vehicle unless there is a power distribution problem or moisture that causes it to fail. If your vehicle won’t start, have one of our expert technicians diagnose the problem and replace the ECM power relay if necessary.

What common symptoms indicate you may need to replace the ECM-Power Relay?

  • Engine will not start when the key is turned.
  • Engine doesn’t turn over when ignition is on.
  • Check Engine light is on.
  • Battery drain which may leave it weak or dead.

How important is this service?

Although it is extremely unlikely the ECM relay will cause your vehicle to stall or create a safety concern, your vehicle may not start or the battery may die while the ignition is off. In either case, you will need to replace the ECM relay.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Volvo mechanics

Real customer reviews from Volvo owners like you.

Excellent Rating

(19)

Rating Summary
18
0
0
0
1
18
0
0
0
1

Tien

23 years of experience
903 reviews
Tien
23 years of experience
Volvo 240 L4-2.3L - Brakes, Steering and Suspension Inspection - Pleasanton, California
Excellent and prompt service as always! Diagnosed the problem quickly and determined that the power steering issue was a simple and much less costly fix rather than having to do significant repairs. Highly recommend!!

Derrick

11 years of experience
176 reviews
Derrick
11 years of experience
Volvo 240 L4-2.3L - Pre-purchase Car Inspection - Benicia, California
Very thorough, helpful and friendly! Answered all my questions and was extremely accommodating.

Sami

21 years of experience
69 reviews
Sami
21 years of experience
Volvo 240 L4-2.3L - Starter - Alexandria, Virginia
Holy wow! I've worked on my Volvo 240 for twenty years and was stumped by the starter, Sami arrived on time and installed a new starter in an hour.... great job! Works like a charm!

Stefan

17 years of experience
367 reviews
Stefan
17 years of experience
Volvo 240 L4-2.3L - Fuel Filter - ,
i was very satisfied with stefan for performance on the job and his mechanical knowledge. paul&carol bilodeau

Excellent Rating

(19)

Rating Summary
18
0
0
0
1
18
0
0
0
1
Number of Volvo 240 services completed
209+
services done by our mechanics
TOTAL NUMBER OF EXPERT Volvo MECHANICS
600+
experts on our platform

Recent articles & questions

P0301 OBD-II Trouble Code: Cylinder 1 Misfire Detected
Diagnostic Trouble Code (DTC): P0301 P0301 code definition Cylinder 1 misfire detected What the P0301 code means There are 4-6 cylinders in...
How to Buy All Season Tires
If If you live in areas with changing weather patterns, you may need to change the tires on your car along with the changing seasons. While tedious at best, replacing tires can also get expensive, especially as the tires you...
P0332 OBD-II Trouble Code: Knock Sensor 2 Circuit Low Input (Bank 2)
Trouble code P0332 means the PCM is receiving a reading that the knock sensor is too low, which can result in higher emissions and engine problems.

inner Cv axle wont come out?

You will need to get the axle removal tool at a parts store and hook it to a heavy duty slide hammer. Give it some good raps with the slide hammer with the tool behind the axle joint. This should...

Clicking noise in back of pick up only forward not backwards??

Hello. I would need to listen to the noise to see if the problem is in the brakes. If the rotor (https://www.yourmechanic.com/services/brake-rotor-disc-replacement) or drum (https://www.yourmechanic.com/services/brake-drum-replacement) is warped, then the pads or shoes may make a click sound every time the...

powertrain fault is on my dashboard just got a oil change and it came on? Whats wrong?

Check the level of engine oil to be sure they actually added oil. Check to be sure the gas cap seal is in good condition and the cap is secure (a loose cap is a common cause of a warning...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com