Toyota 86 Transfer case fluid is dirty Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(16,939)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(16,939)

Transfer case fluid is dirty Inspection Service

How much does a Transfer case fluid is dirty Inspection cost?

On average, the cost for a Toyota 86 Transfer case fluid is dirty Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2018 Toyota 86H4-2.0LService typeTransfer case fluid is dirty InspectionEstimate$114.99Shop/Dealer Price$124.99 - $132.49
2019 Toyota 86H4-2.0LService typeTransfer case fluid is dirty InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2020 Toyota 86H4-2.0LService typeTransfer case fluid is dirty InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2017 Toyota 86H4-2.0LService typeTransfer case fluid is dirty InspectionEstimate$94.99Shop/Dealer Price$104.99 - $112.48
Show example Toyota 86 Transfer case fluid is dirty Inspection prices

A transfer case is unique to all-wheel drive and four-wheel drive vehicles, sending power from the engine to the rear wheels. The transfer case is a sealed unit and may be either gear-driven or chain-driven depending on the manufacturer. Because the transfer case is a sealed unit, it requires lubrication to keep all of the moving parts clean and at a reasonable temperature. Transfer case fluid ensures the longevity of parts in the transfer case.

How this system works:

In four-wheel drive and all-wheel drive vehicles, a transfer case is either connected directly to the back of the transmission, or by a small driveshaft further back in the vehicle. When activated, the transfer case takes power from the engine to the back wheels. Depending on the kind of vehicle, power may go to the rear wheels on a full-time or part-time basis. All-wheel drive systems are typically on all of the time while a four-wheel drive system are activated by either pressing a button in the vehicle or by manipulating a selector lever, typically located near the transmission hump on the floor. In both systems, transfer case fluid keeps the internal parts of the transfer case lubricated. Over time, transfer case fluid will become dirty and break down. When transfer case fluid breaks down you may notice shuddering from the vehicle while turning or a whining noise from the gears in the transfer case.

Common reasons for this to happen:

  • Time: Over time, transfer case fluid will break down and become dirty. Dirty transfer case fluid may cause moving parts in the transfer case to have more difficulty moving, which may cause them to fail.

  • Improper Filling: If the transfer case is not properly filled with transfer case fluid, it may break down more quickly, have difficulty dissipating heat, and keeping parts lubricated.

What to expect:

A top-rated mobile mechanic will come to your home or office and determine whether or not your transfer case fluid needs to be replaced. If it does, he or she will then provide a detailed inspection report outlining the reason the fluid needed to be replaced and the cost of any repairs that may need to be made.

How it's done:

A mechanic will first have your vehicle idle for a few minutes to warm the fluid as warm fluid will drain easier. The mechanic will then drain the old transfer case fluid through the drain plug. The drain plug on most transfer cases is magnetic and picks up metal shavings that otherwise might potentially damage components in the transfer case. The mechanic should clean the drain plug before replacing it. The mechanic will then remove the fill plug and add new fluid. The mechanic should also double-check the amount of fluid, he or she puts in the transfer case, ensuring that it was done properly. A vehicle that is under-lubricated may not dissipate heat or protect critical components as well as a vehicle that is properly lubricated. When the transfer case is full, the mechanic will replace the fill plug and check for any leaks.

How important is this service?

By choosing to not replace your transfer case fluid, you may compromise critical and expensive components inside the transfer case. Because the transfer case is a sealed unit, it is very important that the transfer fluid is filled properly so that heat is appropriately dissipated and components to not suffer from unneeded friction. Repairing a differential can be very expensive, so in order to preserve these components, you should have you transfer case fluid replaced at the correct intervals. Doing so could potentially save you a lot of money down the road.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Toyota mechanics

Real customer reviews from Toyota owners like you.

Excellent Rating

(16,939)

Rating Summary
15,935
598
109
72
225
15,935
598
109
72
225

Nazareth

27 years of experience
294 reviews
Nazareth
27 years of experience
Toyota 86 H4-2.0L - Pre-purchase Car Inspection - West Covina, California
Timely, patient, and helpful!

Marco

11 years of experience
73 reviews
Marco
11 years of experience
Toyota Corolla L4-1.8L - Brake Pads Replacement (Front) - Anaheim, California
Marco was quick, transparent, and helpful!

Jeremiah

10 years of experience
22 reviews
Jeremiah
10 years of experience
Toyota Sienna V6-3.3L - Car is not starting - Portland, Oregon
Knowledgeable, professional, on-time. Highly recommended.

John

20 years of experience
590 reviews
John
20 years of experience
Toyota Highlander L4-2.4L - Evaporative Emission Control Canister - Winter Garden, Florida
John came to do a warranty inspection after I had an emissions system part replaced. My car had started leaking gas as I pumped the fuel into it. He was able to detect the problem and replaced the emissions cylinder again, as well as the damaged hose. It was not a minor mistake that had been made originally and having a gas leak was very serious to me. He was very efficient and explained how one part was actually put back in the wrong place. I would definitely use John as my mechanic for any future work that needs to be done on my vehicle.

Excellent Rating

(16,939)

Rating Summary
15,935
598
109
72
225
15,935
598
109
72
225
Number of Toyota services completed
186329+
services done by our mechanics
TOTAL NUMBER OF EXPERT Toyota MECHANICS
1600+
experts on our platform

Recent articles & questions

How to Buy a Good Quality Key Chain
While While not a car part, your key chain can still play a pretty important role to your vehicle. With today’s key chains offering a wide range of features, it’s suddenly more than just a fashion statement. Here are a...
The Best Tool to Reach Hose Clamps
Hose clamps are present in most cars, but can be hard to reach. Remote access hose clamp pliers solve this common issue for automotive technicians.
P0791 OBD-II Trouble Code: Intermediate Shaft Speed Sensor “A” Circuit
P0791 means that there is an issue with the intermediate shaft speed sensor circuit due to a faulty sensor, solenoid, or wiring issues.

Check Engine and Service 4 Wheel Drive lights on.

Hi there. These issues that you are having would not be related to a tune up or oil change, though they should be done if they are over due. Since the check engine light is on you need to start...

My radiator fan broke from hitting the shroud.

Hello Jennifer. One way you may be able to tell if the new fan is going to work will be to figure out why the old fan was being interfered with. Was anything about the shroud or the original fan...

my thermostat housing is leaking

Hi there: Most of the time when the thermostat housing is leaking it's caused by dirt or debris that may not have been fully cleaned out when it was replaced. This will cause the gasket to not seal correctly. Other...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com