Suzuki Verona Driveshaft Repair at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(6)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(6)

Driveshaft Repair Service

How much does a Driveshaft Repair cost?

On average, the cost for a Suzuki Verona Driveshaft Repair is $1317 with $1191 for parts and $126 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2006 Suzuki VeronaL6-2.5LService typeDriveshaft - Rear ReplacementEstimate$2531.13Shop/Dealer Price$3136.49 - $4929.91
2004 Suzuki VeronaL6-2.5LService typeDriveshaft - Front ReplacementEstimate$2507.13Shop/Dealer Price$3112.52 - $4905.95
2004 Suzuki VeronaL6-2.5LService typeDriveshaft - Rear ReplacementEstimate$2507.13Shop/Dealer Price$3112.51 - $4905.94
2006 Suzuki VeronaL6-2.5LService typeDriveshaft - Front ReplacementEstimate$2507.13Shop/Dealer Price$3112.49 - $4905.90
2005 Suzuki VeronaL6-2.5LService typeDriveshaft - Rear ReplacementEstimate$2507.13Shop/Dealer Price$3112.53 - $4905.98
2005 Suzuki VeronaL6-2.5LService typeDriveshaft - Front ReplacementEstimate$2507.13Shop/Dealer Price$3112.51 - $4905.94
Show example Suzuki Verona Driveshaft Repair prices

What is the Driveshaft all about?

The driveshaft transmits the power (torque) created by the engine to the front (front wheel-drive), rear (rear wheel-drive), or front and rear (four wheel-drive) of the vehicle as required. A 4WD vehicle may have two driveshafts.

Keep in mind:

  • A four wheel-drive vehicle may have two driveshafts, in which case you may only need one replaced.
  • A vehicle with modified height will run a greater risk of having a damaged driveshaft.
  • When your driveshaft is replaced, all other components should be checked for quality, and the U-joints should be properly lubricated.
  • In some vehicles, it is more straightforward and affordable to replace the entire driveshaft than to replace a single component.

How it's done:

  • Remove and replace drive shaft.
  • Perform basic safety inspection.
  • Test drive the vehicle.

Our recommendation:

When applicable, make sure all U-joints are lubricated during a major service. This will extend the life of your driveshaft.

What common symptoms indicate you may need to replace the Driveshaft?

  • A clunking noise when you accelerate or shift between drive and reverse.
  • Vibration when driving.
  • Squeaking noise while driving.

How important is this service?

A driveshaft is responsible for transferring power from a vehicle’s transmission to its wheels. The driveshaft receives the torque from the transmission, and uses it to turn the wheels. As the driveshaft gets damaged, it doesn’t do its job as well, which puts undue pressure on other parts of the vehicle, which can cause damage. When the driveshaft ceases working entirely, the vehicle won’t be able to send power to the wheels, and you won’t be able to drive.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Suzuki mechanics

Real customer reviews from Suzuki owners like you.

Excellent Rating

(6)

Rating Summary
6
0
0
0
0
6
0
0
0
0

Melvin

14 years of experience
158 reviews
Melvin
14 years of experience
Suzuki Verona L6-2.5L - Check Engine Light is on - Portsmouth, Virginia
Melvin was a pleasure to meet and be around. Extremely courteous and polite. Above all else knowledgeable. If Melvin is available I will be using him every time. Highly recommended?

Eric

12 years of experience
230 reviews
Eric
12 years of experience
Suzuki Verona L6-2.5L - Valve Cover Gasket - Raleigh, North Carolina
Eric is a very knowledgeable and experienced mechanic. The job, valve cover replacement for my car is one of the difficult ones. It is complicated because many components, electrical connections and hoses had to come off before he could get to the valve cover. He was very patient and meticulous with the job and made sure everything is working fine.

Joshua

27 years of experience
709 reviews
Joshua
27 years of experience
Suzuki Verona L6-2.5L - Engine idle speed is high - Walnut Creek, California
I have nothing but praises for Joshua. He has this incredible ability to troubleshoot issues with cars and armed with knowledge on the subject to his teeth. On top of that, he is also extremely proficient in fixing car issues that do not require troubleshooting. I was so impressed with Josh's sincerity and professionalism that I ended up getting 8 services done in the past month and a half. Of course, for every service, I requested for Josh. When Josh first came to service my car (simple oil change), I was on the verge of getting ready to dispose the car off (a 2004 Suzuki Verona EX, with just 68,000 miles). All thanks to Josh, the car is running better than when it was new (I am serious ... the brand new car had engine trouble and the dealer agreed to replace the engine after a good fight). It is now a pleasure to drive the car and I hope to use it for another 5 years, at least. I strongly recommend Josh to one and all if you ever happen to use YourMechanic.com. For all my car service needs, I will rely on Josh and YourMechanic.com from now on.

Julio

27 years of experience
67 reviews
Julio
27 years of experience
Suzuki Verona L6-2.5L - Radiator - Orlando, Florida

Excellent Rating

(6)

Rating Summary
6
0
0
0
0
6
0
0
0
0
Number of Suzuki Verona services completed
66+
services done by our mechanics
TOTAL NUMBER OF EXPERT Suzuki MECHANICS
300+
experts on our platform

Recent articles & questions

How to Replace a Headliner
As As your car ages, there is probably nothing more annoying than a sagging headliner. But a vehicle doesn’t necessarily have to be old for the ceiling fabric and foam to start to deteriorate. Faulty headliner installations are a problem...
P0600 OBD-II Trouble Code: Serial Communication Link Malfunction
P0600 code definition The P0600 code is a diagnostic trouble code that points to a malfunction in the communication link of the...
How to Become a Certified Mobile Vehicle Inspector (State Car Inspector Certified) in Colorado
Automotive technician jobs include mobile vehicle inspectors. Learn how to do car checks in Colorado through the Department of Public Health.

no power to accessories

Hello. Thanks for writing in. The commonality between all of these systems is that they run through your door hinge. Due to this they also share common fuses and conduit. Start by looking into the fuse and fuse box. If...

Check engine light comes after a long trip. OBD II scanner gives the code P0015. What would be the cause?

Hi there. The code P0015 (https://www.yourmechanic.com/article/p0015-obd-ii-trouble-code-camshaft-position-b-timing-over-retarded-bank-1-by-jay-safford) is stored for the camshaft position sensor has recorded that the timing is excessive retard. The sensor could have failed due to oil deposits leaking onto the sensor, the variable valve timing sensor has...

Blew hole in bottom of motor, is it worth fixing ??

If the engine has a rod that went through the block or oil pan then you may have damaged the engine block beyond repair. I would recommend having a mechanic inspect the motor and check for a possible engine swap...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com