Suzuki Verona Clean and Repack Wheel Bearing at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(6)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(6)

Clean and Repack Wheel Bearing Service

How much does a Clean and Repack Wheel Bearing cost?

On average, the cost for a Suzuki Verona Clean and Repack Wheel Bearing is $152 with $0 for parts and $152 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2004 Suzuki VeronaL6-2.5LService typeClean and Repack Wheel BearingEstimate$183.98Shop/Dealer Price$199.99 - $211.99
2006 Suzuki VeronaL6-2.5LService typeClean and Repack Wheel BearingEstimate$151.98Shop/Dealer Price$168.01 - $180.04
2005 Suzuki VeronaL6-2.5LService typeClean and Repack Wheel BearingEstimate$151.98Shop/Dealer Price$168.01 - $180.03
Show example Suzuki Verona Clean and Repack Wheel Bearing prices

What is cleaning and repacking the wheel bearings all about?

A car’s wheels rotate on tapered-roller bearings which fit between the stationary axle spindle and the rotating wheel’s hub/brake mechanism. There are bearings on the inner and outer side of the hub to properly support the wheel. These are greased when installed, but the grease can, and does, break down over time, allowing dry contact between the various elements. When left unattended, this will lead to wear and, ultimately, to bearing failure.

Keep in mind:

  • Since noise is the first symptom of metal-to-metal contact, it’s likely that damage has already occurred, and that bearing replacement may be necessary.
  • The job will require the removal of the wheel and brake assembly, so it might be advisable to inspect the brake pads, steering tie rods and suspension pieces in the process.
  • If you’re going to do one wheel, it’s only logical that you should also do the other side.

How it's done:

  • The vehicle is raised and supported on jack stands
  • The front or rear wheels, brakes and hubs are removed from the vehicle
  • The front or rear wheel hubs, bearings are cleaned and greased then install a new grease seal in hub
  • The front or rear wheels, brakes and hubs are installed back on the vehicle
  • The vehicle is lowered off of the jack stands

Our recommendation:

Consider having this job done when your vehicle reaches high mileage, particularly if it has been operated with heavy loads or on unusually bumpy roads.

What is a common symptom indicating you need to clean and repack the wheel bearings?

  • Any noise noticeable from the wheels. It can start as a squeal, and then develop into a growl or even a grinding sound.

How important is this service?

A catastrophic wheel bearing failure can lead to the wheel coming off the car. Obviously, that could cause an accident or, at the very least, serious damage to the vehicle. It’s certainly worth discussing with one of our mechanics.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Suzuki mechanics

Real customer reviews from Suzuki owners like you.

Excellent Rating

(6)

Rating Summary
6
0
0
0
0
6
0
0
0
0

Joshua

27 years of experience
709 reviews
Joshua
27 years of experience
Suzuki Verona L6-2.5L - 67,500 Miles Maintenance Service - Walnut Creek, California

Julio

27 years of experience
67 reviews
Julio
27 years of experience
Suzuki Verona L6-2.5L - Radiator - Orlando, Florida

Eric

12 years of experience
230 reviews
Eric
12 years of experience
Suzuki Verona L6-2.5L - Valve Cover Gasket - Raleigh, North Carolina
Eric is a very knowledgeable and experienced mechanic. The job, valve cover replacement for my car is one of the difficult ones. It is complicated because many components, electrical connections and hoses had to come off before he could get to the valve cover. He was very patient and meticulous with the job and made sure everything is working fine.

Joshua

27 years of experience
709 reviews
Joshua
27 years of experience
Suzuki Verona L6-2.5L - Engine idle speed is high - Walnut Creek, California
I have nothing but praises for Joshua. He has this incredible ability to troubleshoot issues with cars and armed with knowledge on the subject to his teeth. On top of that, he is also extremely proficient in fixing car issues that do not require troubleshooting. I was so impressed with Josh's sincerity and professionalism that I ended up getting 8 services done in the past month and a half. Of course, for every service, I requested for Josh. When Josh first came to service my car (simple oil change), I was on the verge of getting ready to dispose the car off (a 2004 Suzuki Verona EX, with just 68,000 miles). All thanks to Josh, the car is running better than when it was new (I am serious ... the brand new car had engine trouble and the dealer agreed to replace the engine after a good fight). It is now a pleasure to drive the car and I hope to use it for another 5 years, at least. I strongly recommend Josh to one and all if you ever happen to use YourMechanic.com. For all my car service needs, I will rely on Josh and YourMechanic.com from now on.

Excellent Rating

(6)

Rating Summary
6
0
0
0
0
6
0
0
0
0
Number of Suzuki Verona services completed
66+
services done by our mechanics
TOTAL NUMBER OF EXPERT Suzuki MECHANICS
300+
experts on our platform

Recent articles & questions

Writing Off Your Business Miles: A Crash Course
Track the miles you drive for work to deduct the cost from your taxes. Use a mileage log to give an accurate number to the government.
I Have No Idea What's Wrong With My Car - Where Do I Begin?
If If you’re like the majority of people in the U.S., you use a car to get from Point A to Point B and rely on all the parts working properly. None of us expects to break down on the...
Why to Always Check Technical Service Bulletins (TSBs) Before Repairing a Car
Automotive technician jobs require investigating car issues. Technical service bulletins (TSBs) are checked before repairs are made by a mechanic.

After driving awhile, when idling, RPM drops below 500 & car stalls. Happens rarely but RPM fluctuates, and drops suddenly.

If you are having a stalling problem (https://www.yourmechanic.com/article/how-to-fix-a-stalling-car) then you may have a computer code stored in memory. I suggest having the computer scanned to see if there is any codes stored and diagnose them as needed. The intake hose...

Just bought a used Forester that started rattling when I'm not accelerating and the wheel is straight. Any ideas on what it could be?

Hey there. The most common source of rattles on Subaru's are the exhaust heat shields (https://www.yourmechanic.com/services/heat-shield-replacement). They can rattle under all sorts of random circumstances. Whenever you turn, accelerate, let off the gas or brake, the motor experiences torque that...

Battery change. Do you do computer reset after battery change?

Hi there: The ECU contains a small battery inside of it that acts as a back up when the battery drains or is removed; which ensures that data is not wiped away when the battery is replaced. There is no...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com