Suzuki Sidekick Power Steering Pressure Hose Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(6)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(6)

Power Steering Pressure Hose Replacement Service

How much does a Power Steering Pressure Hose Replacement cost?

On average, the cost for a Suzuki Sidekick Power Steering Pressure Hose Replacement is $439 with $299 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1993 Suzuki SidekickL4-1.6LService typePower Steering Pressure Hose ReplacementEstimate$803.66Shop/Dealer Price$969.43 - $1458.62
1994 Suzuki SidekickL4-1.6LService typePower Steering Pressure Hose ReplacementEstimate$794.65Shop/Dealer Price$958.65 - $1446.52
1996 Suzuki SidekickL4-1.8LService typePower Steering Pressure Hose ReplacementEstimate$1086.71Shop/Dealer Price$1323.75 - $2030.68
1996 Suzuki SidekickL4-1.6LService typePower Steering Pressure Hose ReplacementEstimate$1086.71Shop/Dealer Price$1323.75 - $2030.68
1997 Suzuki SidekickL4-1.6LService typePower Steering Pressure Hose ReplacementEstimate$1086.71Shop/Dealer Price$1325.22 - $2033.26
1990 Suzuki SidekickL4-1.6LService typePower Steering Pressure Hose ReplacementEstimate$794.65Shop/Dealer Price$958.81 - $1446.81
1991 Suzuki SidekickL4-1.6LService typePower Steering Pressure Hose ReplacementEstimate$794.65Shop/Dealer Price$958.69 - $1446.59
1992 Suzuki SidekickL4-1.6LService typePower Steering Pressure Hose ReplacementEstimate$794.65Shop/Dealer Price$958.67 - $1446.56
Show example Suzuki Sidekick Power Steering Pressure Hose Replacement prices

What is the power steering pressure hose and how does it work?

The power steering pressure hose transfers the high-pressure hydraulic output of the power steering pump to either a steering gear box or steering rack and pinion unit to create the power assist that you rely on when you turn the steering wheel. The pressure hose is only used in cars with a power steering pump and reservoir, so if you have a newer car you may have electric power steering instead. The pressure hose is relatively large in diameter in order to withstand high hydraulic pressure, flex as the engine moves and vibrates, and also withstand engine heat, accidental cuts, and abrasion.

When to the consider replacing the power steering pressure hose:

  • Groaning, whirring noise or difficulty steering. Noise, or difficulty turning the steering wheel, may reflect a low power steering fluid level, which could be due to a leak in a pressure hose, or a leak elsewhere in the power steering system. Although a leak in the pressure hose is a possible cause of a low fluid level, a mechanic will consider all other possible causes, too.
  • Visible fluid leaks. There are usually steel ferrules clamped onto each end of the rubber pressure hose. These ferrules are common leak points. If there is seepage from these ferrules, the pressure hose should be replaced.
  • Hose damage. If the hose has significant physical damage, such as cuts, abrasions, cracks, or heat damage, the hose should be replaced to avoid sudden hose failure.
  • Contaminated fluid. If rubber particles are found in the power steering fluid or reservoir, it means the interior of either the pressure hose or the return hose is deteriorating. All rubber hoses should be replaced and the system flushed. An in-line, aftermarket fluid filter might be required.
  • Hose age. Both the pressure and return hoses are rubber-based products with a limited service life. If the vehicle is more than 10 years old, and power steering components are being replaced, all the rubber hoses should be replaced during that service.

How do mechanics replace the power steering pressure hose?

The underhood routing of the power steering pressure hose varies greatly between car models. The repair procedure ranges from simple to quite involved. The basic steps are:

  • Raise car as needed and support with steel safety stands.
  • Unthread the pressure hose tube nuts, or banjo-style bolts, at each end of the pressure hose.
  • Remove pressure hose and inspect interior hose lining for separation, if visible.
  • Install a new hose, using a new sealing washer or O-ring seals as applicable, and paying particular attention to the required original equipment manufacturer’s (OEM) torque value for the tube nuts or banjo bolts. Replace rubber return hose, if required, and with the authorization of the customer.
  • Once the system is fully sealed again, bleed or flush power steering system as required to remove all air and contaminants.
  • Finally, the engine is run, the car is test driven, and leaks are checked for at all connections.

Is it safe to drive with a power steering pressure hose problem?

No. The fluid in the power steering pressure hose is under very high pressure and flammable. A leak that sprays fluid into a hot engine part, such as the exhaust manifold, can cause a fire. Leaks that cause significant fluid loss can cause difficulty in steering and, if a leak causes the fluid level in the reservoir to drop too low, it can cause damage to the power steering pump too, necessitating the installation of not only a new hose but a new pump.

When replacing the power steering pressure hose keep in mind:

  • When the power steering hoses are replaced, the entire power steering system should be inspected.
  • Use only OEM specified power steering fluid in your power steering system.
  • If the pressure hose has deteriorated from the inside, the rubber return hose should be replaced as well and the system should be flushed. A mechanic might recommend the installation of an in-line filter to capture all debris.
  • Tube nuts and banjo bolts used to seal pressure hoses have OEM-specified torque values. Mechanics will use a calibrated torque wrench to tighten the connections.
  • Complete removal of air from the system can occasionally take some time, even after the normal bleeding procedure. During this time some mild noise may be heard when turning the steering wheel. If it persists more than a day or so, the system should be rechecked.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Suzuki mechanics

Real customer reviews from Suzuki owners like you.

Excellent Rating

(6)

Rating Summary
6
0
0
0
0
6
0
0
0
0

Russell

25 years of experience
356 reviews
Russell
25 years of experience
Suzuki Sidekick L4-1.6L - Valve Cover Gasket - Portland, Oregon
He showed up early and got the job done before I had to leave for another appointment. Will use again.

Ramiro

22 years of experience
103 reviews
Ramiro
22 years of experience
Suzuki Sidekick L4-1.6L - Electric Problems - Seattle, Washington
Ramiro is very thorough and went through all the systems to make sure that he came up with the best solution. He then explained all of the solutions to me in detail in a way that I could understand.

Victor

36 years of experience
230 reviews
Victor
36 years of experience
Suzuki Sidekick L4-1.8L - Door does not lock or open - Los Lunas, New Mexico
I would gladly give your company 20 stars for the excellent service that I received from Victor. Is courtesy prompt is professionalism and expertise exceeded my expectations.As a widow and t senior citizen, I was greatly reassured by his calm demeanor and his kindness and desire to make sure that my car was safe for myself and all other citizens driving on the road with me.I would definitely recommend him to anyone who wishes to have a courteous professional and proficient mechanic to evaluate their car and fix whatever could be fixed.

Pardeep

22 years of experience
1277 reviews
Pardeep
22 years of experience
Suzuki Sidekick L4-1.8L - Car is not starting - San Jose, California
Quick, found what the problem was very easily thank you

Excellent Rating

(6)

Rating Summary
6
0
0
0
0
6
0
0
0
0
Number of Suzuki Sidekick services completed
66+
services done by our mechanics
TOTAL NUMBER OF EXPERT Suzuki MECHANICS
300+
experts on our platform

Recent articles & questions

P2428 OBD-II Trouble Code: Exhaust Gas Temperature Too High Bank 1
P2428 P2428 code definition A P2428 trouble code signifies that the PCM has detected a problem in the exhaust gas temperature sensor circuit in bank 1, which subsequently contains the number one cylinder. A P2428 trouble code is also associated...
How Can I Tell If the OBD System Is Working Correctly?
Today’s Today’s cars are far more sophisticated than they once were, and they require a computer to monitor and manage the various systems so that everything works together properly. This also gives you the means to determine if there’s something...
How to Buy a Good Quality Steering Wheel Cover
A A steering wheel cover is something that you can slip over your steering wheel to personalize the look of your vehicle, add extra grip, make for a more comfortable grip, and to protect your steering wheel from damage. Here...

I have no power to the fuel pump or the fuel cut off switch. All fuses are good, what could it be?

Hi there - now that you have checked the fuses (Good job!) check the MFI relay on the under-the-hood fuse & relay box. It controls power to the fuel pump and the engine control unit (ECU). If it is working,...

Overheating

Hello. Heater failure and transmission issues are signaling that the cooling system is having a complete meltdown. Both of these systems depend on the cooling system to work correctly. Typically when the entire system is struggling there is a severe...

Transmission line pressure too high for too long 2006 dodge magnum

It sounds like you downloaded Code P1745 which refers to line pressure being out of range (high) for too long. The line pressure solenoid could be faulty and/or the solenoid harness is open, shorted, or has high resistance (poor electrical...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com